Single Handle Floor Mount Tub Filler Trim with Hand Shower in Stainless

Hello! Thank you for contacting Delta Faucet Company! We do not have a way to adjust the flow out of our floor mounted tub fillers. Our floor mounted tub fillers usually put out 6 to 12 GPM. We apologize for any inconvenience this has caused. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hello Ozuzayq, Thank you for your question! We apologize that the information you are searching for was not readily available. We realize that can be very frustrating and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. The Delta Faucet model T4759-CZFL Single Handle Floor Mount Tub Filler Trim With Hand Shower In Champagne Bronze is labeled with the California Prop 65 warning label, as are all Delta Faucet floor mount roman tub trim faucet trims, which prevents us from shipping it to California. These products, however, can be purchased locally and online. If purchased online it will be required to be shipped to another location outside of California. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy Please contact us back directly via email with any further questions. Best Regards, Skyler

Hello Steve! Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you but I will be happy to help! Unfortunately, this Delta Faucet T4759 Trinsic® Roman Tub With Hand Shower Trim can't be adjusted to allow the water flow to be closer to the tub. We apologize for any inconvenience this may have caused. Please contact us directly if further assistance is needed at this time.  We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim

Hi Josh, Thank you for your question about the Delta Faucet model T4759-FL. Please accept our sincere apology for the inconvenience you are experiencing with a leak. We are happy to help! We recommend replacing the seats and springs RP4993 in the legs of the cartridge. If the issue remains, replace the RP73598 cartridge. See instructions for a similar faucet here: https://support.deltafaucet.com/s/article/My-1300-1400-Series-Monitor-is-leaking-from-the-shower-head-or-spout-What-do-I-need-1628028367129 Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi DrABC, Thank you for your question about the Delta Faucet model T4759-BLFL. No, this model does not have flow volume control. Turning the handle will open the flow with cold water and turning the handler further will increase the temperature. Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi John, Thanks so much for contacting Delta Faucet Company about T4759-BLFL! Yes, the RP82534 stream straightener can be removed by the included wrench. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi Diverter replacement part, Thank you for your question about the Delta Faucet model T4759-CZFL Single Handle Floor Mount Tub Filler Trim With Hand Shower In Champagne Bronze. We will be happy to assist you as quickly as possible. Yes, a replacement diverter assembly is available as part number RP74810. https://www.deltafaucet.com/parts/product/RP74810.html You can purchase Delta Faucet products at many local dealers and internet sites. If a dealer does not carry a specific item in stock, they should still be able to place an order for you. I recommend using the store locator on our Delta website. https://www.deltafaucet.com/where-to-buy Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hello Valued Customer, Thank you for contacting Delta Faucet Company! The seats and springs help seal the water against the stem units to turn it off completely. If there is water dripping from the spout, the seats and springs will need to be replaced. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hello Anonymous, Thank you for your question, we would be happy to assist. The spout flow rate is up to 10 gpm @ 60 psi, 37.8 L/min @ 410 kPa. With the RP73598, non pressure balance cartridge, the flow rate is 13.5 gpm @ 60 PSI. 51.1 L/min @ 414kPa. If you have any further questions please contact us 1-800-345-3358, Monday through Friday from 7 am to 7 pm and Saturday 8 am to 5 pm CST. Best Reguards, Joshua

Hi Ana M, Thanks so much for contacting Delta Faucet Company! The handshower, hose, diverter, handle and spout can be all broken down. Please see the following parts diagram for more information. https://media.deltafaucet.com/PartsDiagram/DPD-B-T4759-FL%20Rev%20D.pdf Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi Stacy, Thank you for your question about the Delta Faucet model T4759-FL Single Handle Floor Mount Tub Filler Trim With Hand Shower In Chrome. We will be happy to assist you as quickly as possible. Yes, this faucet can be adjusted to increase how far the handle turns and increase the maximum amount of hot water that can be mixed. First, remove the handle by loosening the set screw with a 3/32" Allen hex wrench. Then the Rotational Limit Stop on the end of the cartridge can be pulled and rotated counterclockwise. See the faucet manual for more information: https://media.deltafaucet.com/MandI/107565%20Rev%20C.pdf Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hi CLee, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. If you are having a leaking issue with your Delta Faucet Single Handle Floor Mount Tub Filler Trim With Hand Shower In Matte Black MODEL#: T4759-BLF, we would recommend flushing the unit. Please see the instructions below. Start by turning the hot and cold supply off, then loosen the set screw inside the handle. Next, remove the handle and slide the trim ring off. Remove the bonnet nut by rotating counterclockwise with a wrench. Remove the cartridge by pulling it directly back on the stem. Take a soft cloth and wipe the puck located behind the cartridge, let the cartridge soak in a 50/50 mixture of white vinegar and water for about 10 minutes before reassembling. Lastly, take a bowl or bucket and hold over the open valve. Turn the water on and direct the water in the tub, let this flush for 1-2 minutes. This should fix the leak you are having, but if you find the issue remains, the cartridge would need to be replaced. https://media.deltafaucet.com/PartsDiagram/DPD-B-T4759-FL%20Rev%20D.pdf Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hello Pauline, Thank you for your question! I am happy to help you! This Delta Faucet cartridge RP73598 does have a rotational limit stop that can be adjusted to get hotter water. Here is a how-to video in our video gallery on how to adjust the rotational limit stop: https://www.deltafaucet.com/video-gallery/video-page?videoId=n2_uZ7wgV1I Please contact us back for any further questions. Best Regards, Nicole

Hello Valued Customer, Thank you for contacting Delta Faucet Company! Quality is very important to us and our products undergo rigorous testing to ensure high-quality performance. If at any time you experience any issues with any of your Delta Faucet Company products please reach out to our customer service department as soon as possible. We would be more than happy to assist with getting any issues resolved for you! We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist