Lenta®
View Full Lenta® Kitchen Collection

Single-Handle Pull-Down Kitchen Faucet in Chrome

Model#: 19802Z-DST
Add to Favorites
Find local Delta® installers.
Lenta®
View Full Lenta® Kitchen Collection
Single-Handle Pull-Down Kitchen Faucet in Chrome
Model#: 19802Z-DST
List Price: $39900
Add to Favorites
Find local Delta® installers.
PRODUCT FEATURES
Kitchen sink faucets with Touch-Clean® Spray Holes allow you to easily wipe away calcium and lime build-up with the touch of a finger. Delta® ShieldSpray® Technology cleans with laser-like precision while containing mess and splatter. A concentrated jet powers away stubborn messes while an innovative shield of water contains splatter and clears off the mess, so you can spend less time soaking, scrubbing and shirt swapping. Delta® kitchen faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. Kitchen sink faucets with Touch-Clean® Spray Holes allow you to easily wipe away calcium and lime build-up with the touch of a finger. You can install with confidence, knowing that Delta kitchen faucets are backed by our Lifetime Limited Warranty. *Industry standard is based on ASME A112.18.1 of 500,000 cycles.
  • LEAD-FREE COMPLIANT: Not all faucets are certified to necessary safety standards. Delta goes above and beyond with product testing and quality to ensure each faucet meets plumbing safety standards, including NSF/ANSI 61 and 372.  
  • MagnaTite® Docking uses a powerful integrated magnet to snap your faucet spray wand precisely into place and hold it there so it stays docked when not in use and doesn’t droop over time
  • ShieldSpray® Technology powers off the mess without making a mess
  • Concentrated stream cuts through messes and innovative water shield reduces splatter
  • Soft, rubber Touch-Clean® spray holes allow you to easily wipe away calcium and lime build-up with the touch of a finger
  • DIAMOND™ Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
  • Everything you need is together in one convenient box, including integrated InnoFlex® PEX supply lines
  • Fits 1 or 3-hole installations with included 10-3/4 in. deck plate
  • ADA compliant
  • The high-arc, gooseneck design swivels 360 degrees with a 20-in. retractable hose for added convenience during everyday kitchen tasks
Special Information
Warning Image
California Prop 65 WARNING
Technology and Special Features
ADA Compliant
No-Lead Compliant
Diamond Seal® Technology
ShieldSpray®
MagnaTite® Docking
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Product Support, Repair Parts & Technical Specifications
View Technical Specifications
View Maintenance & Installation Sheet
View Parts & Accessories Diagram
Register Product
Resources
Design Files
Installation Information
1 or 3-hole 8" installation
1 or 3-hole 8" installation
Connection Type :
3/8" compression fittings
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
16-1/4
Valve Type:
Ceramic Disc

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
Rated 5 out of 5 by from Great Faucet Great faucet for our kitchen!
Date published: 2026-05-10
Rated 5 out of 5 by from Better rated water flow and three sprays to chose from. Got this in SS and love it!
Date published: 2026-04-30
Rated 5 out of 5 by from Love my Delta faucet! Great faucet; looks great in my kitchen. Well made!
Date published: 2026-03-15
Rated 5 out of 5 by from Delta Lenta I LOVE this faucet! Function and it’s beautiful sleek form are in perfect synchronicity. It’s water pressure is perfectly normal. The spray options work properly and easily. Highly recommend!
Date published: 2026-01-05
Rated 5 out of 5 by from Looks great and works great too. This faucet in the black finish was the perfect addition to the kitchen renovation. All appliances and hardware are also black and this faucet looks fabulous. The addition of the pull down faucet and spray settings are a bonus.
Date published: 2025-11-22
Rated 5 out of 5 by from Nice faucet I like it better than my last faucet. Pressure is good without over spraying everywhere.
Date published: 2025-11-16
Rated 4 out of 5 by from Beautiful! I had this sink installed about a month ago as part of a kitchen remodel. It's everything I wanted. I replaced a slightly larger, double bowl sink which was not functional at all. This Delta sink is plenty large and deep enough to do everything you need a kitchen sink to do. I appreciate the accessories that are included. However, I would suggest that the silicone mat is too large to easily remove and clean. I would prefer having two pieces that fit together and could much easier be removed one at a time for cleaning.
Date published: 2025-11-12
Rated 5 out of 5 by from Warranty on spray head Appreciate warranty coverage on spray head
Date published: 2025-10-13
  • y_2026, m_6, d_11, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.46
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_64
  • loc_en_US, sid_19802Z-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 7ms
  • reviews, product
Q&A

my thin wall one hole ss sink do I need reinforce my Lenta faucet mod#19802Z-SP-DST

Asked by: G Wool
Hi G Wool, Thank you for your question about the Delta Faucet model 19802Z-DST. Our faucets have been redesigned so the stabilization plate is mostly unnecessary. But it may be needed for a thin gauge sink. It helps if the sink is thin enough to bend when the faucet is used. https://www.deltafaucet.com/parts/product/RP37490.html Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Delta
Date published: 2025-01-16

Which cartridge replaces the Rp74836 as it seems to be discontinued? Is it the rp73000?

Asked by: Carlos
Hello Carlos! Thank you for your question and we are happy to help. The Delta RP74836 is an orderable part. Please contact us directly by giving us a phone call or sending us an email for further assistance in ordering warranty replacement parts. Best Regards, Carrie
Answered by: Carrie
Date published: 2024-12-10

I have a Single-Handle Pull-Down Kitchen Faucet in Chrome Model#: 19802Z-DST Faucet stopped working. Manual or touch. Is there a reset process?

Asked by: RJ2025
Hello Valued Customer, Thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing and we are happy to help! We have reached out to you directly to further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Delta
Date published: 2025-02-04

Is the valve designed so that the vertical position of the handle is full coke and the fed 90degree position is full cold?  This is different than the other kitchen faucets we have had.

Asked by: Chuck
Hi Chuck, Thanks so much for contacting Delta Faucet Company about 19802Z-DST! The Euro motion cartridge does have a different handle operation. The handle should be straight up when off, you would grab the handle and tilt out for on and cold, then pull towards you for hot. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-08-02

Are there instructions to open the spray head and clean out the filter? ‘Water flow has decreased and this is my first thought. 

Asked by: Sconz
Hi Sconz, Thank you for your question about the Delta Faucet 19802Z-DST. Please accept our apology for the inconvenience you are experiencing. We are happy to help! The aerator in the spray head can be unscrewed and cleaned. A replacement aerator and wrench is RP90248. 50/50 white vinegar and water can be used by spraying, wiping, or soaking. Then rinse the finish. Also, the spray head unscrews from the hose. The screen or the connection can be cleaned. Loop or secure the hose so it doesn't retract into the spout. Please reach out with any additional questions! Best Regards, Bryan
Answered by: Delta
Date published: 2025-11-07

Hi, I don’t see a soap dispenser in the Lenta collection, but the video has a shot with one. What which soap dispenser is recommended to pair with the faucet? Thanks, Chris

Asked by: Csbodkins
Hello Chris! Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you but I will be happy to help! The Delta Faucet soap dispenser shown in the video is the RP50781CZ soap dispenser in the Champagne Bronze finish. However, please see the following link to view all of our soap dispensers. https://www.deltafaucet.com/kitchen/accessories/soap-dispensers Please contact us directly if further assistance is needed at this time.  We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim
Answered by: Delta
Date published: 2024-03-28

How does one clean the screen inside the nozzle head?

Asked by: Jerry
Hello Jerry, Thanks so much for contacting Delta Faucet Company! To clean the product, we recommend you try soaking the product in a 50/50 solution of water and white distilled vinegar. This could break up any possible calcium buildup inside. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Kelley
Date published: 2025-01-07

How do i make the water hotter? It does not have the optional limit stop switch inside the handle. Is there a cartridge I can order?

Asked by: DEEDEE
Hi DEEDEE, Thanks so much for contacting Delta Faucet Company! The only way to increase the temperature would be to adjust your hot water heater. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

My Delta Lenta is missing the handle set screw. How can I replace it? 

Asked by: L3jsea
Hi L3jsea, Thank you for your question regarding our Delta Faucet 19802Z-DST. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-01-31

Why is the base of my faucet blinking red what does that mean?

Asked by: Psssst
Hi Psssst, Thank you for your question about the Delta Faucet model 19802Z-DST. A blinking red light indicates a battery or power issue. I recommend changing the batteries. See battery information here: https://support.deltafaucet.com/s/article/What-size-batteries-does-my-Touch2O-faucet-use-How-many-How-long-will-they-last-How-do-I-know-they-need-to-be-replaced-What-if-I-don-t-replace-them-in-time-1628028366384 Please reach out with any additional questions! Best Regards, Bryan
Answered by: Delta
Date published: 2026-02-05

What parts is the faucet made out of?

Asked by: KP12
Hi KP12, thank you for contacting Delta Faucet Company! The total makeup of our products is considered proprietary and may vary depending on the model. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist
Answered by: Customer Service
Date published: 2023-08-09

I have a brand new Lenta 19802z-sp-dst kitchen faucet. It will not let the water get hot.  I was sent a new cartridge, that did not fix it.  has plenty of flowon both hot and cold settings, but it won’t let the water get hot.  How can I get hot water?

Asked by: anne
Hi anne, Thank you for your question regarding our Delta Faucet 19802Z-DST. The only way to increase the temperature would be to adjust your hot water heater. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-01-31

Do you have to hold down the button on faucet head while using the different water sprays or will it lock into position?

Asked by: Larry
Hi Larry, Thank you for your question about the Delta Faucet model 19802Z-DST. The switch between the aerated stream and the spray setting will stay in place without holding the button. The third setting, ShieldSpray, is intended to be used while holding the spray head near the plate or dish, and the button would be held down for ShieldSpray. Please reach out if you have any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-02-16

Does the Lenta faucet default back to stream (from spray) when you turn it off and back on again?

Asked by: lynn
Hello Lynn, Thank you for your question about the Delta Faucet model 19802Z-DST LENTA™ Single-Handle Pull-Down Kitchen Faucet. I apologize for any difficulty finding this information. We are happy to help! The faucet includes a spray head with an aerator stream, a spray mode, and ShieldSpray mode. Press the buttons on the spray head to change between stream and spray. After releasing the ShieldSpray button the sprayer returns to stream mode. Please reach out directly at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

I have a 19802z kitchen faucet. We have new counter tops with a single hole and I need the mounting hardware for the faucet.

Asked by: Tk5k
Hello! Thank you for contacting Delta Faucet Company! The mounting hardware for our 19802Z-DST is RP92714. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Delta
Date published: 2026-01-08

Can the handle/lever on the Lenta faucet be changed to the right side of the faucet?

Asked by: Clifford
Hello Clifford! Thank you for your question and we are happy to help! The Delta LENTA™ Single-Handle Pull-Down Kitchen Faucet MODEL#: 19802Z-DST handle is already on the right side. You are able to install the faucet with the handle on the opposite side but the controls will be reversed. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta customer. Best Regards, Carrie
Answered by: Delta7
Date published: 2024-03-28

How do I register it for the warranty?

Asked by: Brian3757
Hi Brian3757! Thank you for contacting us at Delta Faucet! I will be happy to help. Please contact us directly via email or phone in order to register your product. Best Regards, Tim
Answered by: Delta
Date published: 2024-03-28

Can this faucet be mounted directly to counter without deck plate

Asked by: Deltagirl22
Hi Deltagirl22, Thanks so much for contacting Delta Faucet Company! The 19802Z-DST can be installed with the plate for a 3 hole install, or just install the faucet in a single hole with no plate. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Hello - the space between the back of my over mount kitchen sink & the backsplash is 3 1/2 inches with the hole centered. Will the Lenta faucet fit in this space?

Asked by: Beth
Hi Beth, Thank you for your question about the Delta Faucet model 19802Z-DST. Yes, we recommend a minimum of 2 1/2" from the hole center to the back splash to best operate the handle. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-09-13

Is the aerator removable for cleaning/replacement? What size is it?

Asked by: tmcginn9
Hi tmcginn9, Thanks so much for contacting Delta Faucet Company! Yes, the aerator can be removed for cleaning and maintenance. This aerator has a M16.5x1-8g thread size. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Does model 19802Z-SP-DST have a matching bar faucet with spray

Asked by: Ball
Hi Ball, Thanks for your question regarding 19802Z-DST! No, the Lenta™ Collection does not currently have a matching bar/prep faucet; however, I have included a link below to our bar/prep faucets: https://www.deltafaucet.com/kitchen/specialty-faucets/barprep?page=2 Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

I just purchased a new New Delta Single-Handle Pull-Down Kitchen Faucet on Amazon. The spray head will not stay attached. It appears that the clip at the top of the spray head is broken.

Asked by: rcat
Hi rcat, Thank you for your question regarding our Delta Faucet 19802Z-DST. We have reached out to you directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-05-28

Is there any way to use a portable dishwasher with this faucet?

Asked by: Keljo3420
Hello Keljo3420! Thank you for your question and we are happy to help! Unfortunately, we do not have any recommendations for portable dishwashers that can or cannot be used with our faucet. With any further questions or concerns, please do not hesitate to reach out to us directly. Best Regards, Carrie
Answered by: Delta7
Date published: 2024-03-28

I have a cabinet above my sink. How much space do above the sink to install the Lenta?

Asked by: Jer1
Hi Jer1! Thank you for your question and we are happy to help. The Delta 19802Z-DST is 15 3/4" (400 mm). With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie
Answered by: Customer Service
Date published: 2024-10-07

We just installed this model. It looks great, but seems to only work when you use the touch feature. Isn't there a way for it to turn on manually too? It's kind of annoying to always have to touch it to get the water to flow.

Asked by: Naaadj
Hi Naaadj, Thank you for your question! A Delta faucet with Touch2O can distinguish between a touch and a grab to help with using the faucet similar to a manual faucet. When grabbing the handle to turn on the faucet, both the handle valve and the touch valve should open. To disable the touch valve and use the faucet manually, the power or batteries can be disconnected while the water is running. Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Delta
Date published: 2025-03-14

What is the overall all height of faucet and the clearance needed for water levers from back splash to work properly. 

Asked by: SueP
Hello Sue, Thank you for your question about the Delta Faucet model 19802Z-DST Lenta™ Single-Handle Pull-Down Kitchen Faucet In Chrome. I apologize for any difficulty finding this information. I know that can be frustrating. We are happy to help! The height is 15.75" and the minimum clearance to the backsplash should be 2.5" from the hole center. See the specification sheet for more information: https://media.deltafaucet.com/SpecSheet/DSP-K-19802Z-DST%20Rev%20A.pdf Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan
Answered by: Customer Service
Date published: 2024-03-28

What metal is the faucet made of

Asked by: Suzy
Hi Suzy, Thank you for your question! This model may contain, bronze, brass (36000, 260) (hub, handle, body, tube, fittings, zinc (escutcheon, hub, handle), stainless Steel (undercover plate, seat liner, set screw), copper (tubing), aluminum, PEX-C (puck and tubing), silicone (gaskets), synthetic rubber - EDPM, santoprene (hoses), vinyl (hoses), nylon, plastics, and ceramics. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-02-14

How wide is the base?

Asked by: Ecg7
Hello Ecg7, Thank you for your question! We apologize that the information you are searching for was not readily available and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. The Delta Faucet model 19802Z-SP-DST Single-Handle Pull-Down Kitchen Faucet has a single-hole base width of 2 3/8" and a 3-hole escutcheon base width of 10 3/4". Please contact us back directly via email with any further questions. Best Regards, Skyler
Answered by: Delta7
Date published: 2024-03-28

Is it possible to get a smaller deck plate with this faucet?

Asked by: Randou
Hello Pa, Thank you for your question! We will be happy to help you today. The 10 1/2 inch escutcheon RP47274SS is the only one for this faucet. Please contact us back for any further questions. Best Regards, Renna
Answered by: Delta7
Date published: 2024-03-28

I need to know the set screw size that is needed for the handle. The original has fallen out somehow. Thanks.

Asked by: Nick
Hi Nick, Thank you for your question about the Delta Faucet model 19802Z-BL-DST. The handle set screw size is #8-32x.43. Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28
  • y_2026, m_6, d_11, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.46
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_108
  • loc_en_US, sid_19802Z-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 86ms
  • questions, product
PART LIST

PART LIST

Image-RP60923

Delta®

Delta® Friction Spacers & Clip - Kitchen

List Price: $24.35
Online Price: $19.48
Free Ground Shipping All Orders $49+

RP60923

5.00 2
Image-RP13938

Delta®

Delta® O-Ring

List Price: $8.25
Online Price: $6.60
Free Ground Shipping All Orders $49+

RP13938

4.50 2
Image-RP80619

DELTA

DELTA Bonnet Nut

List Price: $23.55
Online Price: $18.84
Free Ground Shipping All Orders $49+

RP80619

Image-RP21945

Delta®

Delta® Soap / Lotion Dispenser - Nut

List Price: $8.30
Online Price: $6.64
Free Ground Shipping All Orders $49+

RP21945

4.00 2
Image-RP54975

Lahara®

Lahara® O-Ring

List Price: $16.05
Online Price: $12.84
Free Ground Shipping All Orders $49+

RP54975

Image-RP80977

Delta®

Delta® Magnet Replacement Kit

List Price: $69.80
Online Price: $55.84
Free Ground Shipping All Orders $49+

RP80977

3.02 54
Image-RP90248

Restoration

Restoration Aerator & Wrench

List Price: $26.45
Online Price: $21.16
Free Ground Shipping All Orders $49+

RP90248

2.89 9
Image-RP92714

DELTA

DELTA Mounting Hardware

List Price: $46.00
Online Price: $36.80
Free Ground Shipping All Orders $49+

RP92714

2.43 7
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.