Delta®

Two Handle Flexible Mount with Hand Shower

Name: Two Handle Flexible Mount with Hand Shower
Brand: Delta
SKU: R4707
Price: 456.00 USD
Rating: 4.1951 (41 reviews)

Model#: R4707

Click to spin

Add to Favorites

Find local Delta® installers.

Delta®

Two Handle Flexible Mount with Hand Shower

Model#: R4707

List Price: $456⁰⁰

Add to Favorites

Find local Delta® installers.

PRODUCT FEATURES

Includes hand-shower rough-in for easier installation
Easy installation also allows for above-deck adjustability
Flexible mounting arrangement allows design flexibility

Special Information

California Prop 65 WARNING

Special Information

California Prop 65 WARNING

Documents & Specs

Product Support, Repair Parts & Technical Specifications

View Technical Specifications

View Maintenance & Installation Sheet

View Parts & Accessories Diagram

Installation Information

4-hole 8-16" installation

Overall Height (in.) :

1-3/4

Valve Type:

Washerless stem cartridge

INSTALLATION SUPPORT

REVIEWS

Rated 1 out of 5 by Billy from Awful quality, leaked from everywhere Leaked at every possible point. I have a phenomenal plumber, but it took him hours to get this product to not leak. By the end of the day, we just started cutting pieces off and soldering on different parts that would fit in order to stop the leak. I think it would be cheaper to pay someone to custom make the part from scratch than to order this and then spend all day trying to figure out how to make it stop leaking. Any place there could have been a leak, there was.

Date published: 2026-02-27

Rated 5 out of 5 by Ldlcountry from Delta products [This review was collected as part of a promotion.] Delta rough in as expected solid metal

Date published: 2025-12-12

Rated 5 out of 5 by Landon from does its job well does the job well with no leaks

Date published: 2025-05-01

Rated 5 out of 5 by PlumberMN73 from Install for me = Child’s Play Easy basic typical install. Installed 120 of these in new condo building.

Date published: 2023-10-15

Rated 2 out of 5 by Priss from Install Issues I bought this unit for a Roman tub set up. After installation the plumber and I realized the handles (valves) turn a half turn rather than a quarter, as specified. So now my handles interfere with each other. Plus, the diverter will not allow the hand held shower to come on unless there is a lot of water pressure and the hand held shower will not cut off unless the water is turned off. It cannot be operated with the plunger behind the spout.

Date published: 2023-10-05

Rated 5 out of 5 by Shaun from Easy and universal Easy and universal to install

Date published: 2023-01-24

Rated 5 out of 5 by djfixer from Easy to install Easy to install and easy to replace cartridges when necessary

Date published: 2022-09-12

Rated 5 out of 5 by PT from Nice Goes with Roman tub set purchased as separates

Date published: 2022-06-18

R4707 Reviews - page 2

Q&A

Are the R4707 and or the R4707-MF or R4707- PX interchangeable with the R64707 Brizo product for Roman bathtub in California?

Asked by: Ram_08

Hi Ram_08, Thank you for your question! The Delta Faucet R4707 and Brizo R64707 can be used interchangeably. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Answered by: Customer Service

Date published: 2023-08-25

Needing help. Had the R4707 installed along with a roman tub fixture set and the plumber has been back to my house on 2 different occasions for leaks/issues with the diverter. My current issue is that when we turn the hot water on, the shower wand leaks

Asked by: boilercork

Hi boilercork! Thank you for your question and we are happy to help. The Delta R4707 wand or stem units may need to be replaced. Please contact us directly for further assistance. Best Regards, Carrie

Answered by: Customer Service

Date published: 2024-02-22

Does this come in chrome Can I see an example

Asked by: randy

Hi randy, Thank you for your question about the Delta Faucet R4707. This valve rough is not available in any finishes. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Answered by: Digital Specialist

Date published: 2026-05-27

Can I use sharkbite fittings on the R4707?

Asked by: Robert

Hi Robert, Thank you for your question. Unfortunately, we do not recommend using shark bite fitting in the installation of the R4707. Please view the maintenance and installation guide for proper installation. https://media.deltafaucet.com/MandI/107607%20Rev%20A.pdf Best regards, Simone

Answered by: Simone

Date published: 2024-03-28

Following 109457 rev C page 4 step H, is there a gasket between the diverter outlet and leader hose? Or is it just brass connections and plumber tape?

Asked by: MattS

Hi MattS, Thank you for your question! There is a bottom washer that goes under the deck and a top washer that goes between the handle base and valve. Please see the following parts diagram for more information. https://media.deltafaucet.com/PartsDiagram/DPD-B-R4707_A.pdf Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Answered by: Customer Service

Date published: 2024-01-31

What is the GPM on this unit?

Asked by: Pete

Hi Pete, thank you for your interest in the R4707! The R4707 valve does not have a flow restrictor, so the flow rate will depend entirely on the pressure or PSI in your home. This should be between 15-20 gallons per minute at 40-80 PSI. Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist

Answered by: Customer Service

Date published: 2023-03-02

Hi - What size holes are needed on tub deck for this installation? thanks! We currently have 1 and 3/8 inch wide holes.

Asked by: Fit n Fancy

Hello Fit n Fancy, Thank you for contacting us, I am happy to help you. Our Delta R4707 has two hole sizes depending on the installation, thick or standard. Please see the link below to show the measurements. https://media.deltafaucet.com/SpecSheet/dsp-b-r4707_D.pdf Please contact us back for any further questions. Best Regards, Nicole

Answered by: Delta7

Date published: 2024-03-28

Is the R4707-PX compliant with California's code (CPC)? if not, how do I accomplish this? For example, CPC states "The water-filler valve in bathtubs/whirlpools shall have a temperature limiting device set at a maximum of 120˚ F." (CPC 408.3.2, 409.4)

Asked by: Rick

Hi, Thank you for your question. The Delta R4707 does not limit outgoing water temperature and does not have the ASSE 1070 certification. If your local codes require this, we recommend installing a R2570-MIXLF on the hot water supply line. This is a thermostatic mixing valve that requires you connect a hot and cold supply line to it and set the maximum temperature you want to pass out of the unit to the hot side of the 2 handle roman tub valve. The thermostatic element in this product will satisfy any scald prevention code. Here is a link to the product: http://specselectonline.com/SpecSelectUS.aspx?Page=Products&ProductLineID=140016&BaseID=R2570-MIXLF Best Regards, Themar

Answered by: Themar

Date published: 2026-01-12

I need a Delta undermount valve for trim kit in my tub remodel. I purchased Delta Roman Tub Faucet w/ Hand Shower Model T4738, and also the Delta valve R4707. My plumber cannot use that valve and has asked me to buy an undermount valve instead.

Asked by: Kathy

Hi Kathy, Thank you for contacting Delta Faucet Company! The rough-in valve for our T4738 is R4707. We cannot guarantee that a different rough-in valve will work with this model. We appreciate your feedback. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Answered by: Customer Service

Date published: 2024-03-28

Is this pex or pexA?

Asked by: Mary

Hi Mary, Thank you for your question about the Delta Faucet model R4707. The included braided leader hose is not Pex. The inlet/outlet tubes are corrugated copper. The similar model R4707-MF uses PEX cold expansion type connections. R4707-PX uses PEX crimp ring type connections. Cold expansion fittings are intended to be used with Type A PEX. Please reach out if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Answered by: Customer Service

Date published: 2023-06-12

The specs say the valve outlet is ½", yet the flow rate is listed at 18.0 GPM. Since 18GPM in a ½" pipe would require pressure of 203PSIA, is the actual outlet size ¾"? Or, is this a ½" output valve which actually gives consumers about 9GPM?

Asked by: bacombs

Hello bacombs, Thank you for your question! I am happy to help you! Our Delta Faucet valve R4707 has an outlet of 1/2", and the 18.0 GPM was tested with 60 PSI. Please contact us back for any further questions. Best Regards, Nicole

Answered by: Delta7

Date published: 2024-03-28

I have purchased an R4707 and wonder about the sizes of the diameters of the holes unto the bathtub. Grateful for your advice. Thanks 

Asked by: Sarah

Hi Ms. Tamou, thank you for your interest in the R4707! Please refer to the specification sheet in the link below. https://media.deltafaucet.com/SpecSheet/dsp-b-r4707_D.pdf Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist

Answered by: Customer Service

Date published: 2023-02-10

Is there a cartridge I can get to make handles only turn 90° instead of 180°? On 8” spread handles hit spout.

Asked by: Paul

Hi Paul, thank you for contacting Delta Faucet Company! We apologize for the inconvenience you are experiencing! Please reach out to us directly so we can further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Answered by: Customer Service

Date published: 2023-02-21

What is the flow rate for the tub filler?

Asked by: Cheryl

Hi Cheryl, Thank you for your question about the Delta Faucet R4707. The flow rate will depend on the home water pressure. This valve body has a maximum flow rate of 18.0 gpm @ 60 psi. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Answered by: Customer Service

Date published: 2024-04-11

Hi- we just bought the very beautiful delta Roman tub faucet with the hand shower but now need the R4707 rough in and can’t find it anywhere.  If we don’t find it we will return this $500 faucet.  Can you help?  Thank you 

Asked by: Ally

Hello Ally, Thank you for your question. We are happy to help! We recommend using the store locator on our Delta website to find local dealers and internet retailers that carry Delta Faucet products. https://www.deltafaucet.com/where-to-buy Roman tub valves are also available as R4707-MF and R4707-PX for installations using PEX cold expansion and PEX crimp connections. https://www.deltafaucet.com/bathroom/product/R4707-MF.html https://www.deltafaucet.com/bathroom/product/R4707-PX.html Best regards, Bryan

Answered by: Delta Faucet

Date published: 2024-03-28

Does Delta have a roman tub faucet that is pressure balanced?

Asked by: Chip

Hi Chip, Thank you for your question about the Delta Faucet R4707. Unfortunately, our Roman tub fillers are not pressure-balanced. I apologize for any inconvenience this causes. Our floor mounted tub fillers can use a pressure balance cartridge. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Answered by: Delta

Date published: 2025-03-11

What would cause a significant flow drop to the handheld?  It’s about 1/3 the flow rate

Asked by: Willie

Hello Willie, Thank you for your question. We are happy to help! The Delta Faucet hand shower flow rate would be determined by the trim kit installed. While the tub filling spout does not have the flow restricted, a hand shower will include a flow restrictor for proper function and will have a lower flow rate. Please reach out directly if you have any questions or need additional assistance. Best regards, Bryan

Answered by: Delta Faucet

Date published: 2024-03-28

need install instru8ctions on r4707

Asked by: delta

Hello Customer! Thank you for your question and we are happy to help. The Delta R4707 installation instructions are linked below: https://media.deltafaucet.com/MandI/109457%20Rev%20E.pdf With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Answered by: Carrie

Date published: 2025-06-07

I am planning to purchase model T4799 and I would like to know if rough in model R4707 would work with T4799. Please advise. Thank you

Asked by: Steve

Hello Steve! Thank you for your question! I am happy to help you. The Delta T4799 is compatible with the R4707 rough-in valve. Best Regards, Antoine

Answered by: Delta7

Date published: 2020-10-29

We purchased this for our existing tub with a trim kit. Once installed, we did not realize that the handles would rotate 180 degrees. We need the handles to turn only 90 degrees, or quarter turn. Is there anything we can do to change it to quarter turn?

Asked by: Shannon

Hello Shannon! Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. The Delta Faucet Two Handle Flexible Mount With Hand Shower MODEL#: R4707 uses the RP24096 stem unit which has a quarter turn stop on it which is RP24097. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie

Answered by: Delta7

Date published: 2024-03-28

Do you have a sku # for model r4707?

Asked by: toy cannon

Hi toy cannon, Thank you for your question about the Delta Faucet model R4707. An sku will change depending on where a product is sold. It is determined and used by the selling retailer/wholesaler/dealer. Please reach out with any additional questions! Best Regards, Bryan

Answered by: Delta

Date published: 2025-10-02

Does this faucet have a tempering (anti-scalding), mixing valve? The hot water is not as hot as the other faucets in the house. If so, could you please provide information on how to access/adjust it. Thanks, Dale

Asked by: Dale

Hello Dale, Thank you for contacting us, I would be happy to help you. The R4707 does not have a anti-scald however we recommend doing a full system flush as well as turning the hot water heater down to 120 or less. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole

Answered by: Delta7

Date published: 2024-03-28

Hello, can you tell me if the braided stainless hose supplied with kit R4707 should have o-rings in both ends or just the end that comes with the plug in it? Thank you 

Asked by: Andrewg367

Hello Customer! Thank you for your question and we are happy to help. The Delta R4707 comes with an o-ring for one side. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Answered by: Carrie

Date published: 2025-07-11

Can I purchase individual components of this rough in assembly?  I need just the cold water stem assembly portion. 

Asked by: Dean

Hi Dean, Thank you for your question about the Delta Faucet R4707. A replacement stem assembly, hot or cold, is available as RP24096. See the parts diagram here for more information: https://media.deltafaucet.com/PartsDiagram/DPD-B-R4707_A.pdf Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Answered by: Customer Service

Date published: 2024-06-27

On the R4707 rough in, do you make a longer hose to connect the hand held with? For instance; if we want the handheld separated from the main faucet. Thank you

Asked by: Mark

Hi Mark, Thank you for your question about the Delta Faucet model R4707 Two Handle Flexible Mount With Hand Shower. I am sorry this information was not readily available, and I am happy to help! Yes, a longer 7' leader hose is available as part number RP51099. https://www.deltafaucet.com/parts/product/RP51099.html Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Answered by: Customer Service

Date published: 2024-03-28

Does a tempering valve need to be installed with the R4707 as well? Certain municipalities may require it!

Asked by: Jaime

Hello Jaime, Thank you for your question about the Delta Faucet model R4707 Two Handle Flexible Mount With Hand Shower. I apologize for any difficulty finding this information. We are happy to help! This valve rough-in does not include a tempering valve. If one is required, a thermostatic mixing valve can be installed to the hot water supply. Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan

Answered by: Delta Faucet

Date published: 2024-03-28

What is the flow rate

Asked by: Farmer Dan

Hi Farmer Dan, Thank you for your question! The Delta Roman Tub Rough-In R4707 valve has not been rated for a specific flow rate. It does not have flow restrictor devices in the valve, so the flow rate will be determined by the pressure, plumbing fittings and pipe configuration. The end valve would flow roughly 14-18 gallons per minute. Please reach out with any additional questions! Best Regards, Bryan

Answered by: Delta

Date published: 2025-08-25

Is this rough in valve compatible with the t4732 trim?

Asked by: Eli L

Hi Eli L, Thank you for your question regarding our Delta Faucet R4707. Yes, the trim and valve are compatible. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Answered by: Customer Service

Date published: 2024-03-23

I have a Delta Faucet T2732-RB. Is there anyway I can add a hand shower to it? And if so what parts would I need.

Asked by: ADGGY

Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Any deck mounted T47_ Roman Tub trim kit with a hand shower will work with this valve. Please click the link below and select "Roman Tub with Hand Shower" to browse our current selection. https://www.deltafaucet.com/bathroom/bathing/tub-fillers Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Answered by: Themar

Date published: 2025-03-14

A plumber informs me Delta model number R-4707 2-handle deck mount Roman mid-arc bathtub faucet leaks and needs replacement.   It has a lifetime warranty.     How can I order a replacement ASAP and is there any cost to me.

Asked by: Scrophman

R4707 Questions - page 4

PART LIST