Two Handle Widespread Bathroom Faucet in Chrome

Hi Valued Customer, Thank you for your question regarding our Delta Faucet 35548LF-MPU. RP100702-1.2 is the correct aerator. Please view the link below. https://www.deltafaucet.com/parts/product/RP100702-1.2.html Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Mike, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing with your Two Handle Widespread Bathroom Faucet In Chrome MODEL#: 35548LF-MPU. Here is what we can do to resolve your issue for you. I have included instructions below: 1. To change these parts, please first turn off the water supply to the faucet. 2. Remove the handles by hand, turning the handle base counterclockwise. 3. Once both handles have been removed, with the wrench, unscrew the bonnet nuts counterclockwise to remove them. 4. You should then see the "stems" sticking up, and then the two-quarter pieces that fit around the stem unit. The first quarter does not move, but the second quarter piece is removable. 5. Next would be to remove the stems, below the stem would also be the seats and springs that would need to be removed as well. It is recommended to flush the unit before installing new parts. I will provide directions below. 1. Please place a towel around the backside of the faucet. 2. Place the bucket over the top of the towel, have someone hold the bucket. 3. Turn on water supplies and flush the water for about 30 seconds to a minute. 4. Shut off water supplies and proceed to put the new parts in. Typically, the quarter-turn stops on the left (hot) handle will be on the front side (close to you) and the right (cold) handle will be on the backside (away from you). If you reinstall the handles and find that they aren't turning in the right direction, rotate the stem 180º and check for proper handle rotation. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole Digital Communications Specialist

Hi Amber, Thank you for your question about the Delta Faucet model 35548LF-PNMPU. Yes, the faucet comes with black color rings. The black rings can be changed to the included red and blue rings or left with the black rings. Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please refer to the Maintenance and installation sheet in the link below on page 5 for information on tightening down the handles. https://media.deltafaucet.com/MandI/103611%20Rev%20D.pdf Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Indi, Thank you for your question about the Delta Faucet model 35548LF-KSMPU. The valves are a washerless design. A rotating stem with a stainless steel plate and replaceable rubber seats. We recommend replacing the RP4993 seats if the faucet leaks while off. The stem used is RP25513. Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello Stacey, Thank you for your question regarding Delta Faucet 35548LF-KSMPU! We apologize this information was not readily available to you, we are happy to assist! No, the logo is part of the faucet that cannot be removed. We look forward to better serving you in the future. Please contact us directly with any further questions. Best regards, Kyra Digital Engagement Specialist

Hi Valued Customer, Thank you for your question regarding our Delta Faucet 35548LF-KSMPU. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. The handle base turns counterclockwise to remove. Please refer to the Maintenace and installation sheet in the link below. https://media.deltafaucet.com/MandI/103611%20Rev%20D.pdf Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com