Single Handle Bathroom Faucet in Chrome

Hi Lee, Thank you for your question! This model does not have a Handle Limit Stop to restrict the range of motion on the hot side. Thanks, Jon

Hi Rosanna, I know all about the 3 hole escutcheon plate, but I only have one hole and would like to use the faucet as pictured on your website. The reality is that the plate provides a much better attachment to the counterpart. To really provide a great faucet for your customers, there should be a smaller circular escutcheon plate and circular plastic gasket for the mounting the faucet. It's a great faucet, BUT there should be a smaller circular escutcheon plate and circular plastic gasket to mount it properly! It's a sloppy mount without any plate at all! If the smaller circular escutcheon plate and circular plastic gasket don't exist, I think you should take this conversation back to your designers and engineers. They'll know what I'm saying is true! Thank you, Ken

Thank you for your question, Donny! The supplies are flexible and we recommend looping them in most installations. However, you may cut the lines by following section B page 4 of the Installation Instructions. Please note that cutting the lines voids the warranty on this part and it is up to you to ensure a leak-free connection. https://media.deltafaucet.com/MandI/86674%20Rev%20D.pdf Best regards, Jon

Hi Fusace, Thank you for your question! The hose size for the model 559LF-SSMPU can be viewed on the technical specification sheet. Below is a link to the document: http://www.deltafaucet.com/customersupport/documentation/559lf-ssmpu.html?document=ts&fromDetailArea=bath&documentIndex=0#flashWrapper Best regards, Brandis

Hi Steven S, Thank you for your question. The Delta Trinsic Lavatory 559LF-CZMPU faucet is not currently manufactured with the Touch2O technology feature. Best regards, Tanya

Hi Samantha, Thank you for your question! The spout has a thread size of M16.5x1. Unfortunately, we do not make an adapter for this unit, but you may be able to find one locally or online. Best regards, Jon

Dear GB, Thank you for your question. The pop-up drain assemblies are not designed to hold water for long periods of time. If the water is leaking out of the sink bowl right away, then the water may actually be leaking around the flange and running down the drain. If you push down on the stopper with water in the sink bowl and the water still leaks out of the bowl, then the flange is not sealed properly. I would suggest removing the flange from the sink bowl and applying a large bead of clear silicon to the bottom side of the flange to properly seal the flange with your sink bowl before you reinstall it. If a stopper does not lift straight out, it is being held in by the horizontal rod. Behind the drain pipe under the sink is a horizontal rod connected to the lift rod via the strap. The horizontal rod is held in place by a nut. Remove the nut and pull the horizontal rod straight away from the pipe about an inch. The stopper should now come free of the drain. Best regards, Tanya

Hi, Tony! Thank you for your question. The Delta 559LF-BLMPU faucet does include the Metal Pop Up drain assembly in the matching Matte Black finish. Best Regards, Rosanna

Thank you for your question, Jimbo! Model 559LF-LPU will not include a pop-up assembly however this model is not offered in the Champagne Bronze finish. We apologize for any inconvenience this may cause. https://www.deltafaucet.com/bathroom/product/559LF-LPU Best regards, Edward

Thank you for your questions. Delta Faucet model # 559LF-SSMPU has a 5 inch spout. This model can be ordered and purchased through your local retailer or wholesaler.

Thank you for your question, remv! The spout body and handle are metal (brass or zinc). Some of the internal components are non-metal, such as the PEX water ways. Best regards, Jon

Hi Heidi, Thank you for your question! We recommend to wipe the faucet down with a damp cloth. To help remove water spots you can use a 50/50 solution of white vinegar and water. For more information, please see our cleaning and care guide linked below. https://www.deltafaucet.com/design-innovation/inspiredliving/how-to-clean-a-faucet Best regards, Jon

Thank you for your question, TomL! Unfortunately we do not manufacture aerators with a .35gpm flow rate. Model 559LF-SSMPU does have the option of using 1.2gpm, 1.0gpm or 0.5gpm. These aerators have a thread size of M16.5x1-6g and you may find an aerator with this flow rate and thread size at a local plumbing supply. https://media.deltafaucet.com/PartsDiagram/DPD-L-559LF.pdf Best regards, Edward

Hi Rose1, Thank you for your question. The threaded portion of the flange is 1 3/8" and the top surface diameter is 2 1/8". This assembly should work with a 1 1/2" diameter drain. However, the depth of the hole must be 1 5/8" to 2 3/8". https://media.deltafaucet.com/SpecSheet/DSP-L-559LF-MPU%20Rev%20F.pdf Best regards, Tanya

Hi Jan, Thank you for your question. The recommended minimum clearance to the backsplash for the model 559LF-CZMPU is 2-1/2". Here is a link to the spec sheet for this model. http://www.deltafaucet.com/customersupport/documentation/559lf-czmpu.html?document=ts&fromDetailArea=bath&documentIndex=0#flashWrapper Thanks, Dave

Dear Lauren, Thank you for your inquiry. Delta does make a .5 gpm aerator (RP73806) for the Delta Trinsic Lavatory 559LF-RBMPU faucet, that can be installed for lesser flow rate. Best regards, Tanya

Hello Taylor, Thank you for your question. Delta model 559LF-CZMPU only has one optional escutcheon that is 6" in length. This escutcheon does come with the faucet. Best Regards, Courtney

Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist

Hi, eric16! Thank you for your question. The 559LF-BLMPU does have a 1.0 gpm aerator option. The part number for the aerator and wrench is RP73805. Here is a link to the part: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP73805 Best Regards, Rosanna

Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for technical or warranty information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist

Hello Valued Customer, Thank you for contacting Delta Faucet Company! Our 559LF-MPU has a maximum flow rate of 1.2 GPM at 60 PSI. The aerator is a cache aerator with a thread size of 11/16"-27. For more technical information, please refer to the link below! https://media.deltafaucet.com/SpecSheet/DSP-L-559LF-MPU%20Rev%20I.pdf We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hello Valued Customer, Thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing and we are happy to help! Debris sometimes can get caught in the aerator of the faucet. To remove this, please refer to the information below! 1. Remove the aerator with the aerator wrench. 2. Turn the water on for about 30 seconds to flush the spout. 3. Clean any debris from the spout and aerator. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hello! Yes, this model includes an aerator. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello, Barb! Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you but I will be happy to help! We offer the Delta Faucet RP72991BL Trinsic® Escutcheon & Gasket - 3 Hole - 1H Bathroom In Matte Black to cover the other two holes. Please see the following link for more information. https://www.deltafaucet.com/parts/product/RP72991BL.html Please contact us directly if further assistance is needed at this time.  We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim

Hi steve, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Single Handle Bathroom Faucet In Chrome MODEL#: 559LF-MPU takes the RP101762 cartridge, Which can be found locally or online. Please see the link below to the parts diagram. https://media.deltafaucet.com/PartsDiagram/DPD-L-559LF%20Rev%20C.pdf Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hello! No, model 559LF-PNMPU uses the RP101953-1.2 aerator. https://www.deltafaucet.com/parts/product/RP101953-1.2.html Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi Mark, thank you for your interest in the 559LF-MPU! The model 581LF-PP currently has a maximum flow rate of 1.2 GPM @ 60 psi. GPM models provide 1.0 GPM, and HGM models provide 0.5 GPM at the same psi. Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist

Hello Valued Customer, Thanks so much for contacting Delta Faucet Company about 559LF-MPU! I am sorry for any inconvenience this may have caused, the correct model you would need is 559LF-MPU-PP. I have included a link below to the model. https://www.deltafaucet.com/bathroom/product/559LF-MPU-PP.html#documents-and-specs Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi Andy, Thank you for your question about the Delta Faucet model 559LF-BLMPU. I recommend removing the aerator at the end of the spout with the included wrench to troubleshoot an issue with the faucet's flow rate. Clean the aerator and flush the faucet for a minute with the handle fully opened before reinstalling the aerator. The maximum flow rate is 1.2 gpm. Unfortunately, we don't carry a model with a higher flow rate. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello Cathie! Thank you for your question and we are happy to help! Unfortunately, we do not have a faucet that we are able to recommend for another product outside of our company. We apologize for any inconvenience. With any further questions or concerns, please do not hesitate to reach out to us directly. Best Regards, Carrie