Monitor® 14 Series Shower Trim in Stainless

Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. The cartridge is RP46074. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hello Valued Customer, Thank you for contacting Delta Faucet Company! You can use any of our current 1400 series tub/shower trim kits with an older 1400 series valve. Please note that the Integrated models and the Foundations models are not compatible. Please also note that the cartridge included with our new trim kits are not compatible with the older valves. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hi Ron1802, Thank you for your question about the Delta Faucet FVS6-SA2101-CZ. This bundle includes all parts for a shower faucet. Valve rough and diverter rough are included. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello Customer! Thank you for your question and we are happy to help. The Delta T14235-BL turns 120° maximum handle rotation. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hello Valued Customer, Thank you for contacting Delta Faucet Company! We apologize this information was not readily available to you and we are happy to help! The rotational limit stop can be found on pages 11 and 12 in the link below. https://media.deltafaucet.com/MandI/107528%20Rev%20I.pdf We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hi Ryan! Thank you for your question and we are happy to help. The Delta FVS6-SA2101-BL bundle is not available without the rough in. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hi Valued Customer, Thank you for your question regarding our Delta Faucet FVS6-SA2101. Unfortunately, we do not offer a 1700 series trim kit similar to this trim. The 1700 series would need to be purchased separately. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hello Customer! Thank you for your question and we are happy to help. Models with two handles allow flow and temperature. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hello, Thank you for your question. I have included the flushing instructions below. To flush the open valve without the cartridge, please follow the directions below. 1) Remove the handle by loosening the set screw on the side of the base of the handle. The set screw is either a 1/8" or 3/32" Allen screw. So you will need to use the appropriate size Allen wrench to loosen it. Loosen it just enough to be able to easily pull the handle off. * Note. If there is calcium build-up at the base of the handle, it may be necessary to soak it in a 50/50 solution of vinegar and water. Simply saturate the rag with the 50/50 solution, wrap it around the handle base and place a plastic bag over it. I would recommend do this the night before removing the handle. 2) After removing the handle, remove the trim sleeve. 3) Then you will need to remove the bonnet nut. The bonnet nut is the threaded ring at the valve opening. It unscrews counterclockwise. You will need a pipe wrench or a pair of channel locks. 4) After removing the bonnet nut, you will need to pull the cartridge straight out. You may need a small, skinny bladed screwdriver to wedge in between the lip of the cartridge and the valve to help start it out. 5) Once the cartridge is removed, you will have an open valve body. 6) Next, shut the shower door or curtain and turn the water on to the valve. Water should gush out, much like an open fire hydrant. Have someone observe if there is good water pressure coming out of the valve and let it flush for 30 seconds. 7) Re-install the cartridge and re-assemble in reverse of how it was disassembled. The Tub/Shower should then have a good flow. If it does not, the cartridge will need to be replaced. Please contact us back if you have any questions or need further assistance. We appreciate your business and look forward to continuing to serve you. Best Regards, Themar Digital Communications Specialist

Hi, Thanks so much for contacting Delta Faucet Company! The SAYLOR™ Monitor® 14 Series Shower Trim MODEL#: T14235 handle can be removed by popping the button out of the handle and removing the set screw with the supplied wrench. Please reach out with further questions! Best Regards, Themar Digital Communications Specialist

Hi Dubya, Thanks so much for contacting Delta Faucet Company! The Saylor™ Monitor® 14 Series Shower Trim Model#: T14235 uses the Cartridge Assembly Model#: RP46074. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hello Mike, Thank you for reaching out to Delta Faucet Company! The set screw for the handle on our T14235 is RP102139. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hi greg, Thanks so much for contacting Delta Faucet Company! This shower model will only work with an existing R10000-UNWSHF rough0in valve. Please see the following link for more information. https://www.deltafaucet.com/bathroom/product/R10000-UNWSHF.html Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi bob 81, thank you for contacting Delta Faucet Company! No, the T14235-CZ does not include the rough-in valve. The R10000-UNBX will need to be purchased separately. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist

Hi crispycrisp, Thank you for your question about the Delta Faucet model T14235-BL. The ball connector swivel angle is 36° (18° per side). Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist