Single Handle Pull-Down Kitchen Faucet with Touch₂O® Technology Technology in Champagne Bronze

Hi merezeph, Thanks so much for contacting Delta Faucet Company! There are a couple of common adjustments that can be made to improve the faucet operation. Please make sure any wires are isolated from the solenoid box, the water supply lines, and anything that else that might conduct electricity. If space is limited, we recommend a minimum two inches of clearance, if possible. Since you are using an AC adapter, if the outlet is also housing another plug in, or is close to a garbage disposal, it could cause interference. We would recommend contacting an electrician. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Thank you for your question, Jlmartinez45. We have assembly plants in the US, Canada, and China; and sources worldwide. As a global manufacturer, we source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured, or assembled, they are built to Delta Faucet Company's exacting specifications and are quality tested to ensure long-lasting performance. The location information on the back of the box will tell you where your specific faucet model was made. Best regards, Bryan

Hello rstef583, Thank you for your question! We will be happy to help you today! The Delta Essa 9113R-DST model touch features only work on the spout body, handle and base. Please contact us back for any further questions. Best Regards, Renna

Hello Valued Customer, Thank you for your question. Please accept our sincere apology for the inconvenience you are experiencing, but we would be more than happy to assist you as quickly as possible. Delta Beverage Faucets are for cold water installation only and ideal for any reverse osmosis (RO), under-the-counter water filtration systems, or chillers but cannot be used with Instant Hot tanks. Thank you for being a loyal Delta Faucet customer. We look forward to better serving you in the future. Please contact us directly with any further questions. Best Regards, Kayla

Hi Valued Customer, Thank you for your question regarding our Delta Faucet 9113T-AR-DST. The aerator is not replaceable. To clean wand we recommend soaking the entire wand in a 50\50 solution of white vinegar and water. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi banana07, thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing! Our touch faucets require check valves to be installed. Please verify the check valves are installed properly and that the pressure on the hot and cold are equal. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hello Hoose7984! Thank you for your question and we are happy to help! Unfortunately, there is no replacement spray assembly with Shieldspray available for the Delta ESSA® Single Handle Pull-Down Kitchen Faucet With Touch2O® Technology MODEL#: 9113T-RB-DST. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta customer. Best Regards, Carrie

Hi LRob, Thank you for your question about the Delta Faucet model 9113T-AR-DST. The AC adapter will power the faucet without using the batteries. We recommend leaving the batteries installed so the faucet will be powered in the event of a power outage. Please reach out if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Carol64, Thanks so much for contacting Delta Faucet Company about, 9113T-BL-DST! The C-Clip is not a separate part, the solenoid EP92546 would need to be purchased. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi Patty, Thanks so much for contacting Delta Faucet Company! To switch the ESSA® Pull-Down Kitchen Faucet With Touch2O® Technology MODEL#: 9113T-DST to a manual mode, turn the faucet on so that water is running and then remove the cap from the battery box.    Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hi Todd, Thank you for your question about the Delta Faucet model 9113T-DST. Yes, RP73000 is a replacement cartridge for this faucet. Please reach out if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please contact our TECH2O CONCIERGE at 1-844-923-5368 | Email: concierge@deltafaucet.com | Facebook/Twitter: @deltafaucet. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist

Hi Kara, Please accept our sincere apology for the inconvenience you are experiencing with this Delta Faucet model 9113T-BL-DST. A member of our customer care team has reached out to you directly via email to help resolve this matter for you at this time. Best Regards, Tim Digital Communications Specialist

Hello! Thank you for your question. I am happy to help you. For any type of lowflow issue, you will need to flush / check the supply lines for debris: Turn the supply off to both the hot and cold-water lines. Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water. Next, disconnect the hot water supply line and place it inside of a bucket. Once the line is securely positioned into the bucket, turn on the cold-water supply. Since the handle was left in the on position, the water will flow up the cold supply line, through the faucet cartridge and back down the hot water line into the bucket. Leave this flowing for at least 30 seconds. After flushing, reconnect the hot water line and repeat this process with the cold-water line to ensure all particles have been removed from both supplies. If you need further help with this process, please contact us directly and we can walk you through the procedure. We are available at 800-345-3358 (prompt 2, then 3), Monday through Friday, 8am to 8pm and Saturday, 9am to 6pm CST. Best Regards, Natasha Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com |

Hi Shawn, Thanks so much for contacting Delta Faucet Company! The ESSA® Pull-Down Kitchen Faucet MODEL#: 9113T-BL-DST uses the TRINSIC® DIAMOND™ Valve MODEL#: RP73000. Parts can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hello Customer! Thank you for your question and we are happy to help. The aerator is not removeable and the entire spray head will need to be replaced. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hello Tim G, Thank you for your question. If you need further assistance contact us directly at 1-800-345-3358 or email us at customerservice@deltafaucet.com. Best regards Violet

Hello Valentina! Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. The Delta Faucet Essa® Single Handle Pull-Down Kitchen Faucet With Touch2O® Technology In Chrome MODEL#: 9113T-DST and Arctic Stainless both are great options. To keep the finish clean and intact, we recommend cleaning with 50% warm water and 50% white vinegar. Your choice of finish is your preference and both are durable. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie

Hello NateH99! Thank you for your question! I am happy to help. The Delta 3 hole escutcheon for model 9113t-BL-DST is part number RP47274BL. Best Regards, Antoine

Hello Net Pat, Thank you for your question! I am happy to help you! Our Delta 9113T-DST may need to be reset, I have included below resetting instructions. Start by removing the battery box from the battery wire, waiting a full minute, inserting brand new batteries into the battery box, and then reconnecting the battery box to the battery box wire. Allowing the full minute without the battery box connected will allow time for any remaining electricity in the solenoid to drain, resetting it. Please contact us back for any further questions. Best Regards, Nicole

Hi Ken B, Thank you for your question regarding our Delta Faucet 9113T-DST. We have reached out to you directly by email to further assist you. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Sean, Thanks so much for contacting Delta Faucet Company! It is possible that a flush could resolve this issue. To flush the solenoid Keep the handle in the off position. Remove the clip that is attached to the braided hose on the bottom of the solenoid. After the hose is removed, place a bucket under the solenoid, and then open the handle. It's helpful to have someone control the handle while the other person is in the cabinet with the bucket. We would also advise flushing the hot and cold lines. 1. Please be sure to turn the water supply off before beginning this process. 2. Move the handle to the full mixed position. 3. Disconnect the faucet supply line from the hot side. 4. Position a bucket with the supply line connection inside the bucket. 5. Turn on the supply stop on the connected supply line side slowly, directing the water from the disconnected side into the bucket. 6. Reconnect the supply line. *Please use caution when flushing the hot water.* You'll want to repeat steps 1-6 for the cold side. Once you've done the flushing, you can turn the water supply back on to the faucet. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hi Tony, Thank you for your question about the Delta Faucet 9113T-CZ-DST. RP74836 is not currently sold through our website, but the two included parts are. RP74836 is the RP73000 cartridge with a contact spring (RP78741) for Touch/Touchless capability. https://www.deltafaucet.com/parts/product/RP73000.html https://www.deltafaucet.com/parts/product/RP78741.html Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello Nicola, Thank you for your question! I am happy to help you! Our Delta 9113T-RB-DST handle tilts out for on and cold, then pulls forward for hot. I have also included the link to the technical specifications. https://media.deltafaucet.com/SpecSheet/DSP-K-9113T-DST_A.pdf Please contact us back for any further questions. Best Regards, Nicole

Hi Paul, Thanks so much for contacting Delta Faucet Company about 9113T-DST! We do not recommend attaching an adapter for a portable dishwasher to our Pull down/Pullout faucets, as it can cause back pressure that would break seals and cause leaking. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi ChiMike, Please accept our sincere apology for the inconvenience you are experiencing. We are happy to help! If the hose cannot be pulled apart after removing the clip, there may be mineral deposits holding it. We recommend soaking the area with 50/50 white vinegar and repeating as needed. Wrapping a wet paper towel around the hose for a couple of hours would be a good way for this part. Please don't hesitate to reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist