Single Handle Pull-Down Kitchen Faucet

Download Image

9159-BL-DST is rated 4.3 out of 5 by 132.
  • y_2018, m_10, d_21, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_132
  • loc_en_US, sid_9159-BL-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 13ms
  • Delta MagnaTite Docking holds spray wand firmly in place
  • No-Lead Compliant
Finish: Matte Black
List Price*: $516.80
Base Parts
List Price*: $516.80
  • MagnaTite Docking uses a powerful integrated magnet to snap your faucet spray wand precisely into place and hold it there so it stays docked when not in use and doesn't droop over time
  • Soft, rubber Touch-Clean spray holes allow you to easily wipe away calcium and lime build-up with the touch of a finger
  • DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
  • Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines
  • 1 or 3-hole 8" installation
  • Optional escutcheon available for purchase separately
  • ADA Compliant
  • High-arc pull-down swivels 360degrees
  • 54 in. long hose provides outstanding reach


Special Features

Installation Information

1 or 3-hole 6" or 8" installation

  • Escutcheon: Optional Escutcheon Available
  • Flow Rate: 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa
  • Spout Height: 15-11/16"
  • Spout Length: 9-1/2"
  • Deck to Outlet: 8-7/16"
  • Fittings Type: 3/8" compression fittings
  • Deck Thickness: 2.5"
  • Supply Lines: Included InnoFlex® Pex-C Supply Lines
  • Valve Type: Euromotion DIAMOND Valve
Rated 2 out of 5 by from Water Temperature Issues Delta. D9159ARDST We just moved into our brand new house a month ago and from the first day we have had problems with both Delta Trinsic Faucets in the kitchen and the laundry room. They are the same model. We cannot get any cold water from the faucet or it is always lukewarm when set to cold but might go back and forth from cold for and few short seconds and then back to warm. We have other Delta Trinsic Faucets in 2 other baths and for our showers as well and do not have this problem. It is isolated to the two same model faucets in the kitchen and laundry. The Plumber cannot figure it out. We tried turning off the hot water recirculater and that did not help. So it has to be the faucet. I’ve read that the cartridge could be bad or misaligned. Could this be the problem? Would really like to figure this out to be able to have cold running water in the kitchen and laundry sinks.
Date published: 2018-10-14
Rated 5 out of 5 by from Awesome design and functionality We bought this when we replaced our sink and could not be happier. Sooo stylish and works great. Very smooth and lots of compliments
Date published: 2018-08-07
Rated 3 out of 5 by from Beautiful but lever is very stiff I just installed this faucet and I love the look. The pull-down works great and it swivels smoothly from side to side. But there is one thing that stops me from giving this a perfect 5 stars and that is how difficult it is to turn it on and off and change from cold to hot. The lever is so stiff that it behaves as if something inside is too tight or not lubricated. I expected the lever to move smoothly, but it actually takes some arm muscle strength to change it to any position. I feel as though the force it requires may break something. I wish I wasn't so disappointed because I really like the way this faucet looks. But honestly if I knew it was going to be this difficult to operate I would have chosen something different.
Date published: 2018-07-25
Rated 5 out of 5 by from MagnaTite Docking for 3 years says it all! This is the best kitchen faucet I've ever owned or used in over 50 years as a home maker. After 4 years of use, the faucet looks like new and the "MagnaTite Docking" system works as well as it did on Day 1. I'm moving soon and plan to buy another one to replace the faucet in the new house. I give it my highest 5 star recommendation. Thank you Delta!
Date published: 2018-07-15
Rated 4 out of 5 by from Excelent Overall Kitchen Faucet IT has a very strong water stream which makes cleaning very soiled dishes and pans easier. The only drawback is that, as a lefty, the handle is on the wrong side and requires an awkward cross arm move to turn it on and off. It would be nice if you could order one with the control on the other side.
Date published: 2018-06-02
Rated 4 out of 5 by from Good faucet so far Got the champagne bronze one and was a very easy install. This faucet was pricey and above my threshold until I couldn't find any other reputable brands with this color. Shows a lot of finger prints and the pull down sprayer part is plastic so the finish better hold up. Hopefully the flow stays up, but assuming the flow restrictors will get clogged. Overall a good product, but should be for the price. Looks very nice and is definitely a finishing touch to kitchen.
Date published: 2018-05-31
Rated 4 out of 5 by from Snazzy but temperamental (touch-less) I used the touch-less brushed stainless model for a remodel project and it looks terrific with the black granite composite sink we installed. The faucet is a good size and is well made. The touchless option is great for saving water but it takes some getting used to and can be temperamental. We haven't had to call Delta yet, but I suspect that it will go down at some point. However, it's pretty cool technology and the faucet is beautiful and well made. You can't beat the lifetime warranty.
Date published: 2018-05-29
Rated 5 out of 5 by from Meets my expectations... I waited about a month to write this review. I know that sometimes I get caught up in the euphoria of any new purchase. Well, first of all, this is just a faucet, but a faucet we use dozens of times per day. It replaced a 25 year old "not" Delta kitchen faucet. I still remember the pain of the installation 25 years ago. This Delta faucet was so simple to install that it took me longer to remove the old one than to install this one. Also we were changing the configuration of our sink and removing the old separate sprayer and replacing it with a small filtered water faucet. I was concerned about compatibility with the plumbing for the Delta, but again everything went perfectly. Now the functionality - it took 5 minutes to become acclimated to the magnetic retainer for the sprayer the sprayer control and the new handle. The finish is very nice and the workmanship perfect. If there is one compliant it does take longer for the hot water to arrive at the faucet since this one has a lot lower flow rate than the old one. The hot water supply is a about 30 feet of plumbing from this faucet. Overall I have high standards for items like this since it is expensive but so far it has met my expectations.
Date published: 2018-05-05
  • y_2018, m_10, d_21, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_132
  • loc_en_US, sid_9159-BL-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 15ms

I would like to purchase this faucet as a replacement for my current one.  I currently have 3 holes drilled and will need to cover the two I don’t need with this faucet.  Do you have hole.covers? Coordinating soap dispenser?

Asked by: pamdem
Hello, pamdem. Thank you for you for your question! The RP64070 Escutcheon Plate will work with this faucet for a 3-hole 8" installation. Otherwise, you may also use a soap/lotion dispenser such as the RP1001 or the RP3816 Hole Cover. RP64070 RP1001 Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2018-10-11

How do I clean the screens on the spray head of your 9159-DST Trinsic kitchen faucet 

Asked by: Jeanie
Thank you for your question, Jeanie! We recommend unscrewing the wand assembly from the hose and soaking it in a 50/50 white vinegar and water solution for about 30-60 minutes, then run water both directions through the wand. You can also use an old toothbrush to gently scrub the aerator. Please be sure that the hose does not retract into the spout with the wand removed. Best regards, Jon
Answered by: Delta Faucet
Date published: 2018-09-12

Is there a parts list? I need the clip to connect the pull out hose to the faucet

Asked by: JClark
Hello JClark, Thank you for your question. I have included the Parts Diagram for this Delta Trinsic Pull-Down Kitchen 9159-DST faucet model The Hose Clip part number is RP60911. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2018-08-29

Can the on off handle be on the left as well as the right?

Asked by: Time
Hello Time, Thank you for your question. We recommend installing the faucet with the handle on the right. The handle operates by tilting away from the faucet to turn on and rotating forward to increase the temperature. Unfortunately, there is no way to reverse the movement, so if the handle is installed on the left, it will rotate backwards. Best regards, Jon
Answered by: Delta Faucet
Date published: 2018-08-16

Is SprayShield available for this? Trinsic Model#: 9159-DST

Asked by: TomL
Thank you for your inquiry, TomL! The Delta Trinsic Pull-Down Kitchen 9159-DST faucet model is not designed with the ShieldSpray Technology. Best regards, Tanya
Answered by: Tanya
Date published: 2018-08-13

Does this faucet come in stainless steel with spot resist

Asked by: Dell
Hello Dell, Thank you for your question! This faucet is available in Arctic Stainless, Champagne Bronze, Chrome, and Black. Please click the link below to view products currently available in the SpotShield Stainless finish: Best regards, Jon
Answered by: Delta Faucet
Date published: 2018-08-09

 Looking for an air switch button to match champagne bronze faucet

Asked by: Ben53
Hello Ben53, Thank you for your inquiry! Unfortunately, Delta does not manufacture any air switch buttons. However, we do have the Delta Kitchen Air Gap 72020-CZ in the Champagne Bronze finish. Please see the link for the air gap below. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2018-07-31

what excusion do i need to cover 2 other holes 1 on each side

Asked by: vernon
Thank you for your question, Vernon. The Delta Trinsic Pull-Down Kitchen faucet comes with everything needed for a single hole installation. For a three hole 8" installation, you will need the RP64070 escutcheon plate. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2018-07-31
  • y_2018, m_10, d_22, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_85
  • loc_en_US, sid_9159-BL-DST, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 20ms