Single Handle Pull-Down Kitchen Faucet in Polished Nickel

Dear Diana, Thank you for your question. The hose assembly of the Trinsic Kitchen Pull down faucet 9159-DST model, is not designed to self retract back in the faucet. You would need to push it back up into the faucet. Delta does not make self retracting Pullout/down faucets. Best regards, Tanya

Hello Time, Thank you for your question. We recommend installing the faucet with the handle on the right. The handle operates by tilting away from the faucet to turn on and rotating forward to increase the temperature. Unfortunately, there is no way to reverse the movement, so if the handle is installed on the left, it will rotate backwards. Best regards, Jon

Thank you for your question, Joselyne! The sprayer assembly is non-metallic. Best regards, Jon

Thank you for your question, Mike60! The supply lines can not be replaced so if removing the wand doesn't improve the flow, than you will need to flush the lines of the faucet as debris is mostly likely trapped inside. Instructions on flushing can be found on Page 7, Step 3 of the Maintenance and Installation manual below. Please contact us directly if you have questions or need further assistance. https://media.deltafaucet.com/MandI/92728%20Rev%20E.pdf Best regards, Edward

It should. The faucet swivels 360 degrees

Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist

Thank you for your question, Joe sal! Typically, we recommend using a 50/50 solution of white vinegar and water applied to a rag. This spray wand also includes Touch-clean spray holes. https://www.deltafaucet.com/design-innovation/innovations/kitchen/touchclean-spray-holes Best regards, Edward

THE NEST, Thank you for your question. The pull-down sprayer has a switch for aerated stream and spray. Best regards, Jon

Your mother in-law is wrong! old is when handle is up.

Hi CMMH! Thank you for your inquiry and I apologize for any confusion. With a 62" hose installed, the total length of the pullout hose from the spout will be approximately 22", however, including the wand attached, total length is 24". Best regards, Edward

Hi Suzanne, Thank you for your question! The soap dispenser shown under "More Photos" is the 72065T Touch Soap Dispenser. http://www.deltafaucet.com/kitchen/details/72065t.html Best regards, Jon

Hi CharlieQW, Thank you for your question. The main difference between the 9159-AR-DST and the 19935-SSSD-DST is in the styling of the faucet. Both faucets are pulldown spray models with magnedock, touch clean sprayheads, and our Diamand Seal Technology cartridges. Thanks, Dave

Hi Lee, The model 9959-DST is the smaller version Trinsic Bar/Prep faucet. The faucet has a reach of 6-1/2". Here is a link to the spec sheet for both models. http://www.deltafaucet.com/customersupport/documentation/9959-dst.html?document=ts&fromDetailArea=kitchen&documentIndex=0#flashWrapper Thanks, Dave

Thank you for your question. We do not have retailers in Denmark at this time. To purchase Delta Faucet model # 9159-CZ-DST in the DC area, any wholesaler or retailer like Ferguson Enterprises. Thomas Sommerville, Home Depot, or Lowes may or may not stock the model. However, they will be able to special order it for you.

Thank you for your question. Delta Faucet model # 9159-AR-DST is set at 1.8 gpm at 60 psi. This is to follow today's water legislation. We do not offer a higher gpm aerator for this model.

It swivels and if fully mobile.

Thank you for your question, Tammy! There is a screen where the spray wand connects to the hose that you can check for debris. You can also soak the complete wand in a 50/50 white vinegar and water solution to help dissolve any mineral buildup. Best regards, Jon

Hi, Bunni! Thank you for your question. Unfortunately, there is not a limit stop to get hotter water for this faucet. Best Regards, Rosanna

Hi, ala8c! Thank you for your question. The spray mode on the sprayer assembly for the Delta 9159-CZ-DST is a toggle and will stay at the mode you select without having to keep pressing the desired spray mode. Best Regards, Rosanna

Hello JClark, Thank you for your question. I have included the Parts Diagram for this Delta Trinsic Pull-Down Kitchen 9159-DST faucet model The Hose Clip part number is RP60911. https://media.deltafaucet.com/PartsDiagram/DPD-K-9159-DST.pdf Best regards, Tanya

Hi H, Thank you for your question.Our RP63263 adapter kit should work for your needs. The 2 sets of adapters convert the 3/8" compression thread on the faucet to either 1/2" compression or 1/2" IPS thread. http://www.deltafaucet.com/repairparts/details/rp63263.html Thanks, Dave

Hi Courtney, Thank you for your question. I'm sorry for any inconvenience! You can carefully remove the button cover using any tool with a point such as a nail file. Best regards, Jon

Hi, John! Thank you for your question. The measurement for your hole size should be 1 1/4" to 1 1/2". Here is the link to our technical specifications for this faucet: https://media.deltafaucet.com/SpecSheet/DSP-K-9159-DST%20Rev%20E.pdf Best Regards, Rosanna

Hello Thank you for your question! Yes, it is comparable to stainless steel or brushed nickel. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Thank you for your question Buggy! When you push the button to spray on the Delta 9159-CZ-DST, it stays on until you toggle the button back to the opposite mode. Best Regards, Christina

Thank you for your question, Deb1954! The Trinsic model, 9159-DST is the standard pull down kitchen faucet model. The Trinsic Pro version is actually model number 9659-DST and has a coiled spout that can be removed from the arm so that you can point the sprayer in any direction. The internal 70" pull-out hose can also be extended from the end of the coiled spout for additional reach. https://www.deltafaucet.com/product-comparison?modelNumber=9159-DST&modelNumber=9659-DST Best regards, Edward

Thank you for your question, Theo! Model 9159-AR-DST is a standard pull-down kitchen faucet whereas model 9959-AR-DST is the Bar Prep version and is slightly shorter. https://www.deltafaucet.com/product-comparison?modelNumber=9159-AR-DST&modelNumber=9959-AR-DST Best regards, Edward

Hi Anna, Thank you for your question. The spray hose is made of an ultracore liner. The ultracore liner was developed to be resistance to chlorine and chloramines. The supply tubes are PEX (cross linked Polyethylene) which are also designed to be chlorine and chloramine resistant. Both the hoses and the supply lines are covered under the lifetime warranty for the product. The handle needs 1-1/2" of clearance to the rear and will extend out 4-3/8" to the right of the faucet centers. If you are placing the soap dispenser to the left of the spout 4" centers would be a normal distance. If you are placing the soap dispenser to the right , 6" centers should give you enough space. I have attached a link to the spec sheet for the model 9159-DST below. Thanks, Dave http://www.deltafaucet.com/customersupport/documentation/9159-dst.html?document=ts&fromDetailArea=kitchen&documentIndex=0#flashWrapper

The faucet works in pull down only. It is in the off position in the picture, but it moves to half way down to be on hot fully. You move the faucet handle to the right to turn it on and it only moves about an inch or less to the right to be on full force. The answer is yes, you can use this in a tight spot. The faucet does not operate back at all, all the movement in the handle is down and to the right.

Dear Kyla, Thank you for your question. The Delta Trinsic Kitchen Pull-Down 9159-DST faucet has a recommended minimum 1 1/2" (38 mm) clearance to the back splash, due to the spout being able to swing 360 degrees. Best regards, Tanya