Single Handle Pull-Down Kitchen Faucet in Polished Nickel

Yes, you can vary the water flow be aware that it is a lot easier to pull out open the faucet, you need the patience and small hands to open it gently.

Dear Anne, Thank you for your question. Delta does not have any sink depth recommendations for installing the Trinsic kitchen faucet 9159-DST model or any of our other models. Best regards, Tanya

Hi, Grant! Thank you for your question. Both Delta 9159-BL-DST and the Trinsic bathroom faucets should move out to turn on and give cold water. Pulling the handle towards you and down will give hot water. Best Regards, Rosanna

Hi, Blopez0487! Thank you for your question. We do not offer hot water dispensers. However, we do have a beverage faucet and a bar/prep faucet that will both match the Delta 9159-CZ-DST faucet. The beverage faucet that will match is our Delta 1977-CZ-DST faucet. The Bar/Prep faucet that will match is our 9959-CZ-DST faucet. Here are links to both units: https://www.deltafaucet.com/kitchen/product/1977-CZ-DST https://www.deltafaucet.com/kitchen/product/9959-CZ-DST Best Regards, Rosanna

Hi TPOD, Thank you for your question. The measurement from the faucet center(center of hole) to the center of the water stream is 9-1/2". Here is a link to the model 9159-AR-DST spec sheet with this information. http://www.deltafaucet.com/customersupport/documentation/9159-ar-dst.html?document=ts&fromDetailArea=kitchen&documentIndex=0#flashWrapper Thanks, Dave

Hi ADeschamps, Thank you for your question. This faucet can be used in an outdoor sink. Best regards, Jon

Thank you for your question, Nancy. The hose and wand assembly are non-metallic. The connection does not have a ball joint. Best regards, Jon

The wand assembly probably needs to be taken apart and cleaned. There is a YouTube video illustrating this. Here are the steps: 1. Use small screw driver at top of button to pop it off. 2. Remove the Phillips head set screw. 3. Slide interior assembly down slightly to expose set screw hole in small plastic "cam" piece. 4. Pop out (from bottom) the small plastic "cam" piece. 5. Slide interior assembly down to completely remove. 6. Unscrew the bottom part (about 1/2" long) of interior assembly. 7. Clean both parts of interior assembly (this will be obvious!). Reassemble the wand assembly by repeating the above steps in reverse order. Replace the button (last reassembly step) by pushing in bottom part first. If button does not work, remove and try again. This took me several tries. Here is the link to the YouTube video, which is not mine, but was very helpful: https://www.youtube.com/watch?v=p7Yx1f1r5lQ&feature=em-share_video_user

Thank you for your question, Vernon. The Delta Trinsic Pull-Down Kitchen faucet comes with everything needed for a single hole installation. For a three hole 8" installation, you will need the RP64070 escutcheon plate. https://media.deltafaucet.com/SpecSheet/DSP-K-9159-DST%20Rev%20E.pdf https://www.deltafaucet.com/parts-product-detail?modelNumber=RP64070 Best regards, Tanya

Hi Karen, Thank you for your question! Here is the cleaning and care information for our Delta products below: Always blot dry any water from faucet surface. Allowing water to evaporate on the surface can lead to build up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean soft cloth should help keep your product looking beautiful. To remove water spots, use warm water and a soft, damp cloth. Hard water stains may be removed using a 50/50 solution of white vinegar and water. Make certain that you rinse thoroughly with water afterward. If additional cleaning is required, all of our finishes may be cleaned with the following household cleaners: Formula 409® Antibacterial All Purpose Cleaner, Fantastik® All Purpose Cleaner, or Windex® Original Glass Cleaner, when used according to the manufacturers' instructions for use. Avoid using the following which can damage your finish: Avoid industrial cleaners and abrasive cleaners, such as those used for toilet bowls, green Scotch-Brite heavy duty scrub sponges, Scrubbing Bubbles Bathroom Cleaner and Lysol Basin Tub, Soft Scrub, and Tile Cleaner. Avoid products that state on the label that they remove tarnish and rust, and those containing hydrofluoric, hydrochloric and/or phosphoric acids and caustic agents. Avoid harsh abrasives or polishes Avoid bleach-based cleaners Best regards, Brandis

Thank you for your question, Dave. The faucet comes with everything needed for a single hole installation. For a three hole 8" installation, you will need the RP64070 escutcheon plate. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP64070 Best regards, Jon

Hi TracyC, Thank you for your question. The supply lines on the model 9159-CZ-DST have 3/8" compression fitttings. We have adapters that will convert to 1/2" compression or 1/2" pipe thread sizes. Thanks, Dave

Hi Em, Thank you for your question! The faucet can be installed with the handle towards the left side. Just keep in mind it will operate backwards compared to standard installation. Best regards, Brandis

Hi, AMR Ar! Thank you for your question. The Trinsic 9159-DST sprayer assembly does have two modes, spray and stream. The spray mode is a shower-like spray, while the stream mode is a straight stream. Here is a link to a video to show an example of this: https://media.deltafaucet.com/elvis/Video/PRODUCT_9159-DST.mp4 Best Regards, Rosanna

Once the 54" hose that it comes with is installed, how much of that hose can be extended from the faucet? If I substitute it with the 62" hose, are you saying that it will only extend 18-22" from the faucet? I am looking for a faucet that has approx. 24" extension to reach cooktop next to sink. Thank you.

Hi, Studio Outside! Thank you for your question. Unfortunately none of our kitchen sink faucets are specifically designed to be installed outdoors. They are not designed to withstand extreme cold weather conditions (freezing) or direct sunlight from the sun in the summer months. If you do decide to install one of our faucets outdoors, then please remember that our warranty only covers manufactures defects. Damage incurred to the faucet by the extreme weather conditions are not covered by our warranty program. Best Regards, Rosanna

Hi, Mark! Thank you for your question. You will want to make sure to move the handle away from the faucet to turn on the water. When the handle is out, the water should be all cold. When you move the handle closer to you, the water should get warmer until the handle is towards you, it should be at the hottest position. Best Regards, Rosanna

Hi Julie, Thank you for your question! The spout, body, and handle are metal. The valve consists of a Diamond Seal Technology (DST) cartridge with a brass bonnet nut. The supply lines are PEX tubing. For more information about DST, please click the link below. https://www.deltafaucet.com/design-innovation/innovations/kitchen/diamond-seal-technology Best regards, Jon

Hi, CH335! Thank you for your question. I am sorry to hear that you are experiencing low flow from your faucet. Over time, common water debris will settle in the house supply lines. Anytime the water is shut off to a portion of the home, this debris can become dislodged and will move through the pipes to be caught by a faucet. Local construction or the changing of the seasons can also cause this. Flushing the supply lines through the unit should remedy this situation. To flush the unit, we recommend the following: Start with the easy stuff: Remove your aerator, wand or hose to check the flow through the unit without that part installed. If the flow is good, the piece you’ve removed is where the issue is. Soaking the part in a 50/50 mixture of white vinegar and water could help remove any particles or debris blocking the flow. If the water does not have a good flow, the problem could be in the faucet. Next, check the supply lines for debris: Turn the supply off to both the hot and cold-water lines. Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water. Next, disconnect the hot water supply line and place it inside of a bucket. Once the line is securely positioned into the bucket, turn on the cold-water supply. Since the handle was left in the on position, the water will flow up the cold supply line, through the faucet cartridge and back down the hot water line into the bucket. Leave this flowing for at least 30 seconds. After flushing, reconnect the hot water line and repeat this process with the cold-water line to ensure all particles have been removed from both supplies. If you need further help with this process, please contact us directly and we can walk you through the procedure. We are available at 800-345-3358 (prompt 2, then 3), Monday through Friday, 8am to 8pm and Saturday, 9am to 6pm CST. Best Regards, Rosanna

Thank you for your question, Dave! The Delta model 9159-AR-DST does not have a removable aerator. Typically, we recommend using a 50/50 solution of white vinegar and water applied to a rag. This spray wand also includes Touch-clean spray holes. https://www.deltafaucet.com/design-innovation/innovations/kitchen/touchclean-spray-holes Best regards, Antoine

Dear Marion, Thank you for your question. I have registered your Delta faucet 19933-SD-DST model for you. Also, we ask that you hold onto the warranty/installation paperwork, that came with the faucet and a copy of your original receipt or proof of purchase for any warranty claims in the future. Best regards, Tanya

Dear Miye, Thank you for your question. Delta makes Traditional and Transitional style Beverage faucets. The closest matching one is the Delta Transitional Beverage model 1977-AR-DST. https://www.deltafaucet.com/kitchen/product/1977-DST Best regards, Tanya

Hi, Dena! Thank you for your question. The Delta 9159-DST faucet is a full-size kitchen faucet while the Bar/Prep faucet is a smaller version of the 9159-DST faucet. Here is a link to the technical specifications sheet to show the different measurements: https://media.deltafaucet.com/SpecSheet/DSP-K-9159-DST%20Rev%20E.pdf Best Regards, Rosanna

Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist

Thank you for your review, Sharon! The Chrome finish will always be reflective or mirror-like. The Arctic Stainless Steel finish is a brushed finish with a cooler blue tone than our typical Stainless Steel. Black Stainless is also less reflective but darker than Stainless or Arctic Stainless. https://www.deltafaucet.com/product-comparison?modelNumber=9159-KS-DST&modelNumber=9159-DST&modelNumber=9159-AR-DST Best regards, Edward

Water flow can be very strong, in fact it is hard not to spend so much water. It is not normal to open gently, meaning first you pull out lots of water come out. It doesn't pull out that far to be a problem. I would not recommend the ergonomics of this faucet, I have it and I am stuck with it.

Thank you for your question. Delta Faucet model # 9159-AR-DST is not available in Stainless Steel. The Artic Stainless finish was designed to replace stainless steel in the kitchen and it more closely resembles the stainless steel finish of appliances out in the market today. It has a bluish tint to it and the stainles steel is more gold tinted. The Stainless Steel finish will remain in the bath faucets to match accessories there.

Hi, Steve! Thank you for your question. The Delta 9159-DST Faucet does not have a removable aerator assembly in the sprayer. We do apologize for any inconvenience this may cause. Best Regards, Rosanna

Hello DMeng, Thank you for your question. The three Delta Kitchen Pull-Out/Down faucets with a 1.5 GPM at 60 PSI are models 9192-DST, 4153-DST and 4353-DST. https://media.deltafaucet.com/SpecSheet/DSP-K-19992-SD-DST%20Rev%20B.pdf https://media.deltafaucet.com/SpecSheet/DSP-K-4153-DST%20Rev%20C.pdf https://media.deltafaucet.com/SpecSheet/DSP-K-4353-SD-DST%20Rev%20B.pdf Best regards, Tanya

Hi, Brendan! Thank you for your question. The diameter of the spout on the model 9159-DST is 1-3/8". Best Regards, Rosanna