Single Handle Pull-Down Kitchen Faucet in Lumicoat® Chrome

Model#: 9197-PR-DST
Single Handle Pull-Down Kitchen Faucet in Lumicoat® Chrome
Model#: 9197-PR-DST
List Price: $81300
PRODUCT FEATURES
Kitchen sink faucets with Touch-Clean® Spray Holes allow you to easily wipe away calcium and lime build-up with the touch of a finger. Delta® ShieldSpray® Technology cleans with laser-like precision while containing mess and splatter. A concentrated jet powers away stubborn messes while an innovative shield of water contains splatter and clears off the mess, so you can spend less time soaking, scrubbing and shirt swapping. Delta® Lumicoat™ Finishes are guaranteed to resist water spots and mineral buildup and easily wipe clean without the need for cleaners or chemicals. The ultra-sleek surface repels liquids, resisting water spots and staying cleaner longer, so your faucet stays beautiful. Delta® kitchen faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. Kitchen sink faucets with Touch-Clean® Spray Holes allow you to easily wipe away calcium and lime build-up with the touch of a finger. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. *Industry standard is based on ASME A112.18.1 of 500,000 cycles.
  • MagnaTite® Docking uses a powerful integrated magnet to snap your faucet spray wand precisely into place and hold it there so it stays docked when not in use and doesn’t droop over time
  • ShieldSpray® Technology powers off the mess without making a mess
  • Concentrated stream cuts through messes and innovative water shield reduces splatter
  • Lumicoat® Finishes are guaranteed to resist water spots and mineral buildup and easily wipe clean without the need for cleaners or chemicals
  • Soft, rubber Touch-Clean® spray holes allow you to easily wipe away calcium and lime build-up with the touch of a finger
  • DIAMOND™ Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
  • Everything you need is together in one convenient box, including integrated InnoFlex® PEX supply lines
  • Coordinating soap dispenser sold separately (RP71543)
  • 1 or 3-hole 8 in. installation
  • Optional 10-1/4 in. escutcheon available for purchase separately (RP71545PCPR)
  • ADA compliant
  • The high-arc, gooseneck design swivels 360 degrees with a 20-in. retractable hose for added convenience during everyday kitchen tasks
  • Backed by Delta Faucet's Lifetime Limited Warranty
Special Information
Warning Image
California Prop 65 WARNING
Technology and Special Features
ADA Compliant
No-Lead Compliant
Water-Efficient
Diamond Seal® Technology
ShieldSpray®
MagnaTite® Docking
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Installation Information
1 or 3-hole 8" installation
1 or 3-hole 8" installation
Connection Type :
3/8" compression fittings
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
15-1/2
Valve Type:
Euromotion DIAMOND(TM) Valve

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
Rated 4 out of 5 by from kitchen faucet flow options Overall, I like this faucet, but the spray option is 2 separate sprays instead of a full spray. Doesn't work as well to rinse of sink or rinse a sieve. My old Delta was better in this regard.
Date published: 2026-04-12
Rated 5 out of 5 by from Beautiful Delta touch faucet Excellent product! Faucet is touch controlled making washing so much easier and is beautiful!
Date published: 2026-03-26
Rated 1 out of 5 by from Over Priced, Under Featured Faucet pressure is very low, almost to the point of being unusable and yes, I have flushed the lines, ensured none of the screens are blocked, etc. Without the shower head there is plenty of pressure. The issue appears to be in amount of stuff in the head. Further, when adjusting the touches sensor off since it gets so annoying to actually have the water go on and off when you move within 6-8 inches of the faucet, it never actually goes off. Even in the off setting, the faucet will still go on and off if you are within an inch or two of it. Lots of money for a faucet that I now just use the handle to turn off and on vs the whole point of touch/touchless.
Date published: 2026-03-25
Rated 5 out of 5 by from Great features Great product and very functional.
Date published: 2025-12-07
Rated 1 out of 5 by from Sloped; Easy does it The faucet worked for a few days and then fell to where it stands; sloped
Date published: 2025-12-02
Rated 5 out of 5 by from 10 years so far, bunch of kids Excellent for 10 years with many kids (9 now). Delta sent replacement parts free of charge! Amazing!
Date published: 2025-09-26
Rated 3 out of 5 by from Nice design, poor function Beautiful faucet. Unfortunately Sprayer head is not a strong contact so falls open or spins. Looks nice but function is subpar. Not worth the price, there are more affordable options.
Date published: 2025-09-25
Rated 5 out of 5 by from Love my new faucet Beautiful feel, color and features. Very durable and great warranty
Date published: 2025-09-18
  • y_2026, m_6, d_9, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.46
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_227
  • loc_en_US, sid_9197-PR-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 9ms
  • reviews, product
Q&A

Which finish looks better with a stainless sink - Arctic Stainless or Polished Nickel?

I am having a difficult time being able to decide based on the online images which of these finishes will look better with a stainless sink. Any advice?
Asked by: Julie
Dear Julie, Thank you for your question. The Arctic Stainless finish will match a stainless sink better than the Polished Nickel finish. Please click the link below to see a color sample side by side. https://www.deltafaucet.com/service-parts/faq/faq-tablist-area/tabularlist/other/faq-item-14#answer-bcae231e-bdf4-49d9-aeac-b8f58ea59629 https://www.deltafaucet.com/design-innovation/inspiredliving/finish-vs-finish Best regards, Tanya
Answered by: Tanya
Date published: 2017-08-08

What type of metal is used and where?

I have searched all the Q&A answers, and although a couple of people asked what the faucet is made of, the answers given are not specific enough. Exactly what type of metal is used- Brass? Zinc? Zamak? What parts are metal and what parts are plastic? Your website conveniently (actually inconveniently) leaves out all details regarding material which is not a good sign for anyone looking for a quality faucet.
Asked by: DG
Hi DG, Thank you for your question. The faucet body, spout, and handle are metal. Unfortunately, we do not have a complete breakdown of the materials used. In general, metal parts are usually brass (hub, handle, body, tube, fittings), zinc (escutcheon, hub, handle), or stainless steel (set screw, undercover plate). Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-07-14

In catalog, there's a black ring at the base of the Cassidy. Your website photo doesn't show this. What is/was function of this? What material is it?

Asked by: NH Dreaming
Dear NH Dreaming, Thank you for your inquiry! The Delta Cassidy Pull-Down Kitchen 9197-DST faucet doesn't come with a black ring or base parts. However, we do manufacture a Cassidy Pull-Down Touch2O Technology 9197T-DST faucet that has a black non-metallic LED base. https://www.deltafaucet.com/kitchen/product/9197T-DST Best regards, Tanya
Answered by: Tanya
Date published: 2017-06-17

Does the Delta touch kitchen faucets come in any greater GPM than 1.8?

Asked by: Daniel
Hello, Thank you for your question! No, this is the only flow rate for the Touch2O faucets. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Timothy
Date published: 2025-04-03

What should the hole thickness be for the installation of kitchen faucet, Cassidy 9197DST, into granite? 

Asked by: mlojwo
Thank you for your inquiry, Mlojwo! The Delta Cassidy Pull-Down Kitchen 9197-DST faucet has recommend maximum deck thickness of 2 1/2" (64 mm) w/ 10 1/4" escutcheon plate and 3" (76 mm) for single hole installation. https://media.deltafaucet.com/SpecSheet/DSP-K-9197-DST%20Rev%20D.pdf Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

Is the decorative ring for 9197-RB-DST Faucet required to install or is it acceptable to not apply? Thank you

Asked by: llp1
Hello llp1! Thanks for your question. You will need to check the manufacturing date on the supply lines coming from the base of the faucet. You may also find this information on the box. If the date is prior to 8-1-2018 you will need to use the base ring that comes with the faucet. If the date is after 8-1-2018 you only need to use the gasket, not the base ring. If you have any other questions please contact us back. Best Regards, Yvette Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com
Answered by: DeltaFaucet7
Date published: 2024-03-28

Is there a non-Shield Spray nosel that I can purchase which will fit the 9197DST faucet?

Asked by: Randy J
Hi, Randy J! Thank you for your question. The Delta RP72680 Sprayer Assembly works with the Delta 9197-DST Faucet that does not include the ShieldSpray setting. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

can the sprayer assembly of the 9197-AR-DST be upgraded from 1.8 GPM to 2.2 GPM

Asked by: Frame
Dear Frame, Thank you for your question. The Delta Cassidy Kitchen 9197-AR-DST faucet is designed with a maximum flow rate of 1.80 gpm at 60 PSI. There are no removable internal parts or any adapters made for increasing the flow rate of this faucet. Best regards, Tanya
Answered by: Tanya
Date published: 2017-03-29

How to tight the spout? The spout is loose.

Asked by: home12
Thank you for your question, home12! If only the spout feels loose then you may need a new spout retainer, part number RP60923 which can be obtained by contacting the warranty center directly. If the entire faucet is moving, the mounting bracket below the counter will need to be tightened. Please let us know if you have any questions or need assistance. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP60923 Best regards, Edward
Answered by: DeltaFaucet234
Date published: 2024-03-28

2 Questions on Operation

1. Which way do you move the side-mounted lever handle to turn the water ON - Up or Down; Front or Back? 2. Does the pull down spray wand have a water shut-off button? That is, can you shut the water flow completely OFF from the pull down?
Asked by: GrumpyGeezer
To turn the faucet on, you move the handle out. Front and back are the temperature control. Back being hotter, cold is forward. There is not a shut-off on the pulldown spray attachment, just a rocker switch for spray and regular flow.
Answered by: Chinkle
Date published: 2024-03-28

What is this product made of? metal or plastic

Asked by: john
Dear John, Thank you for your question. Our Delta faucet use either metal and plastic combination or a proprietary mixture of components so that the product has a high quality, while maintaining safety control with the various temperatures of water that go through the product. Delta Faucet Company takes extreme pride in the quality of its products, and strives daily to meet and exceed the expectations of our customers. Best regards, Tanya
Answered by: Tanya
Date published: 2018-07-26

Can this faucet be installed with the control on the left?

Asked by: Mike h
Thank you for your question, Mike, Thank you for your question. We recommend installing it with the handle on the right. The handle operates by tilting away from the faucet to turn on. The vertical (back) position gives cold water and rotating the handle forward provides hot. Unfortunately, there is no way to reverse the movement, so if the handle is installed on the left, it will rotate backward. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

Can we have the handle on the left side?

Asked by: Helen
Thank you for your question, Helen! This model can be installed with the handle on the left side if needed. Best regards, Edward
Answered by: DeltaFaucet234
Date published: 2024-03-28

Can a Delta Cassidy 9197-AR-DST sink faucet be installed in a sink with three holes and how are the extra two holes dealt with.  Also, does this faucet match with the DeltaRP71543 Soap/Lotion Dispenser that can be used to repurpose the current spray hole?

Asked by: Gene
Hello Gene, Thank you for your inquiry! The Delta Cassidy Pull-Down Kitchen 9197-AR-DST faucet is a 1 or 3-hole 8" installation. Ordering RP71545AR the optional escutcheon plate would cover all three holes on the sink. You would order RP71543AR for the optional coordinating soap dispenser . https://www.deltafaucet.com/kitchen/product/RP71543AR https://www.deltafaucet.com/parts-product-detail?modelNumber=RP71545AR Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

Shank length

I need a faucet that has a shank length that will go through a 1 1/4 " thick granite. What is the shank length on this faucet?
Asked by: Bonnie
Hi Bonnie, Thank you for your question! The 9197-DST has a maximum deck thickness of 2 /12". Below is a link to the technical specification for the 9197-DST single handle kitchen faucet: http://www.deltafaucet.com/customersupport/documentation/9197-dst.html?document=ts&fromDetailArea=kitchen&documentIndex=0#flashWrapper Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2024-03-28

Does this faucet come with a Deck Plate to cover 3 holes in the sink

Does this faucet come standard with a deck plate to cover the extra holes in a typical 4 hole sink? I see the soap dispenser is not included.
Asked by: Jake
Hi Jake, Thank you for your question! The 3 hole escutcheon is a optional part that has to be ordered separately. The part number is RP71545RB. Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2024-03-28

Does the Cassidy single handle pull down faucet swivel 360 degrees? I want to install it left handed.

Asked by: Mrs. S.
Thank you for your question. Delta Faucet model # 9197-DST does swivel 360 degrees.
Answered by: Delta1
Date published: 2024-03-28

Will soap dispenser model RP1002AR coordinate with the Cassidy Single handle pulldown faucet?

Asked by: Foggy
Thank you for your question. Delta Faucet model # RP1002AR will work with the Cassidy faucet. However, we recommend Delta Faucet model # RP71543AR to coordinate with that faucet. It is still up to the customer's preference to pick one.
Answered by: Delta1
Date published: 2024-03-28

Does it come in brushed nickel?

Asked by: Wendy
Thank you for your question, Wendy! Model 9197-DST is currently offered in Chrome, Venetian Bronze, Champagne Bronze, Polished Nickel. It is also available in Arctic Stainless which does have brush strokes and matches many Brushed Nickel and Stainless finishes. Below is a link to similar models with the same features that are offered in our Stainless Steel or SpotShield Stainless finishes which is a close match to Brushed Nickel. https://www.deltafaucet.com/product-comparison?modelNumber=9178T-SP-DST&modelNumber=19934TZ-SPSD-DST&modelNumber=9192T-SSSD-DST Best regards, Edward
Answered by: DeltaFaucet234
Date published: 2024-03-28

How do obtain installation parts for a Cassedy 9197 AR DST.

Asked by: Tim L
Thank you for your question, Tim L! On model 9197-AR-DST's web page there is a Where to Buy tab, just below the faucet's list price. Once you are on the Where to Buy page, you can find local and online retailers who might carry this product. However, we can not guarantee if a retailer has the items, currently in stock. If you are needing parts for a warranty claim, you wold need to contact us privately. Best Regards, Benjamin
Answered by: Delta Faucet
Date published: 2024-03-28

what is the difference between 'Euromotion' Diamond valve and Diamond valve

Asked by: Deborah
Thank you for your question. The difference between the two valves is how they operate. The "Euromotion" valve operates to the side as well as back and forth. Both valve contain our Diamond Seal technology.
Answered by: Delta1
Date published: 2024-03-28

what is the horizontal distance from the front of the faucet the the center of the spout?

Asked by: DALE
Dear Dale, Thank you for your inquiry! The Delta Cassidy Pull-Down Kitchen 9197-PN-DST faucet measures 9 3/8" (238 mm) for the how far the faucet sticks out. Please view Technical Specification for this model below. https://media.deltafaucet.com/SpecSheet/DSP-K-9197-DST%20Rev%20C.pdf Best regards, Tanya
Answered by: Tanya
Date published: 2017-05-27

Can we increase the flow rate to more than 1.8 gpm

Asked by: Joanie
Hello Joanie! Thank you for your question. The Delta Cassidy Kitchen 9197-AR-DST faucet is designed with a maximum flow rate of 1.80 gpm at 60 PSI. There are no removable internal parts or any adapters made for increasing the flow rate of this faucet. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

Can the base with handle be rotated forward to about 4 o'clock position over the sink to reduce dripping on the counter?

Asked by: bobcat
Hi, bobcat! Thank you for your question. Yes, you can position the handle to the 4 o'clock position so that the handle is not over the counter. Best Regards, Rosanna
Answered by: Rosanna
Date published: 2016-11-10

Is there a hole cover for the empty hole in the sink that matches a 9197-CZ-PR-DST? We have a RO filter and a soap dispenser, so the escutcheon plate won't work.

Asked by: Paul33
Hi, Paul33! Thank you for your question. Unfortunately, we do not make sink hole covers. We recommend to check with a local plumbing supply or hardware store for a matching sink hole cover. I do apologize for any inconvenience this may cause. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Can the on/off handle on the Cassidy model be put in front, rather than on either side?

I prefer to have my hot/cold selection be left and right, instead of front and back. Is there any reason why this could not be done?
Asked by: Virginia
Thank you for your question. Delta Faucet model # 9197-CZ-DST can be turned so that the handle is in the front ranther than on the side. The whole body of the faucet will need to be turned when it is installed.
Answered by: Delta1
Date published: 2024-03-28

On the Cassidy 9197-RB how do I remove the filter on spray head to clean?

On the Cassidy 9197-RB how do I remove the filter on spray head to clean? I see how to unscrew the spray head itself, but is there a way to clean being the filter on both sides? It appears the aerator side has a metal ring that can be removed--how do you remove that? I have low flow on this faucet but not others. I have checked the connections, etc.
Asked by: Dane
Hi Dane, Thank you for your question. The cache aerator on the model 9197-RB-DST can be unscrewed using the RP52217 aerator wrench. The aerator and wrench are available as RP50815. Thanks, Dave http://www.deltafaucet.com/repairparts/details/rp52217.html
Answered by: DeltaFaucet2
Date published: 2024-03-28

is 9197-dst ADA compliant?

Asked by: SECKERT
Thank you for your question, SECKERT! Model 9197-RB-DST is an ADA complaint model and is listed as such on the technical specifications sheet for reference. https://media.deltafaucet.com/SpecSheet/DSP-K-9197-DST%20Rev%20D.pdf Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

mounting plate included in case I need to cover existing 3 holes in counter?

Asked by: Mary
Hi, Thank you for contacting us. We apologize for any inconvenience with your Delta Faucet Company product. I am also more than happy to have this opportunity to help you. There is a 10 1/2" Escuthcheon plate available to purchase for the model 9197-RB-DST. Please contact us back if you have any questions or if you need further assistance you may call us at 1-800-345-3358. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Thank you for your cooperation. Best Regards, Bethany
Answered by: DeltaFaucet7
Date published: 2024-03-28

Is the Cassidy 9197-ar-dst in arctic finish all metal? Also, does the spray button lock or does one need to hold the button down for spray mode?

Asked by: BusyMom
Hi Busymom, Thank you for your questions. The Arctic (AR) finish used on the metal and non metallic components of the model 9197-AR-DST faucet is not metal, it is considered a plating finish. There is a toggle switch that allows you to switch between spray and stream modes on the wand, you do not have to hold it down. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28
  • y_2026, m_6, d_9, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.46
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_208
  • loc_en_US, sid_9197-PR-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 73ms
  • questions, product
PART LIST

PART LIST

Image-RP60923

Delta®

Delta® Friction Spacers & Clip - Kitchen

List Price: $24.35
Online Price: $19.48
Free Ground Shipping All Orders $49+

RP60923

5.00 2
Image-RP37490

Delta®

Delta® Stabilization Plate

List Price: $29.40
Online Price: $23.52
Free Ground Shipping All Orders $49+

RP37490

3.20 5
Image-RP13938

Delta®

Delta® O-Ring

List Price: $8.25
Online Price: $6.60
Free Ground Shipping All Orders $49+

RP13938

4.50 2
Image-RP63265

Delta®

Delta® Adapter - Slip Joint

List Price: $58.55
Online Price: $46.84
Free Ground Shipping All Orders $49+

RP63265

Image-RP63264

Delta®

Delta® Adapter Kit - PEX Compression (10)

List Price: $92.90
Online Price: $74.32
Free Ground Shipping All Orders $49+

RP63264

Image-RP63263

Delta®

Delta® Adapter Kit - PEX Compression (4)

List Price: $45.35
Online Price: $36.28
Free Ground Shipping All Orders $49+

RP63263

3.67 3
Image-RP72684

Cassidy®

Cassidy® Set Screw & Button

List Price: $25.35
Online Price: $20.28
Free Ground Shipping All Orders $49+

RP72684

Image-RP64071

Trinsic®

Trinsic® Bonnet Cap - 1H Faucet

List Price: $23.20
Online Price: $18.56
Free Ground Shipping All Orders $49+

RP64071

Image-RP72685

Cassidy®

Cassidy® Metal Lever Handle Kit - Kitchen

List Price: $74.45
Online Price: $59.56
Free Ground Shipping All Orders $49+

RP72685

Image-RP49835

Delta®

Delta® Mounting Nut, Washer & Screws (2)

List Price: $42.80
Online Price: $34.24
Free Ground Shipping All Orders $49+

RP49835

1.00 2
Image-RP60114 Secondary Image-RP60114

DELTA

DELTA Euro-Motion DIAMOND Valve

List Price: $78.40
Online Price: $62.72
Free Ground Shipping All Orders $49+

RP60114

4.80 10
Image-RP6092

Delta®

Delta® Nuts & Washers (2) - 500 Series

List Price: $18.70
Online Price: $14.96
Free Ground Shipping All Orders $49+

RP6092

* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.