Single Handle Pull-Down Bar / Prep Faucet in Polished Nickel

Hi, Tbd0227. Thank you for your question. Our faucets are made of several materials, Unfortunately, I am unable to provide a specific breakdown for your faucet as that information is considered proprietary. But in general, our metal parts are usually brass (hub, handle, body, tube, fittings), zinc (escutcheon, hub, handle), or stainless steel (set screw, undercover plate). I am sorry the information you were looking for was not readily available for you. Please know that all of our products undergo rigorous tests to ensure long-lasting use and are made with high-grade materials. Best Regards, Rosanna

Hello Michelle1962, Thank you for your question. The sprayer assembly for the Delta 9959-AR-DST faucet unscrews counterclockwise at the hose connection. Once removed, this can be soaked in a solution of 50% white vinegar and 50% water solution and can be soaked for an hour or even overnight. Best regards, Tanya

Hi, We appreciate the question. It is not recommended to use the Delta 9959-AR-DST with a R/O Systems. We only recommend using our Beverage faucets with the R/O systems. Best regards, Brandis

Thank you for your question. Delta Faucet models 9159-DST and 9959-DST are the same faucet with the 9959-DST just being a smaller version of the kitchen faucet. The only reason we would not recommend using the 9959-DST is it may not have the reach that you would like to all corners of the sink but that is a personal preference issue.

Hi Sal, Thank you for your question. The handle motion on the model 9959-AR-DST is out to turn the water volume on, and forward to adjust temperature. The handle does not travel back. Thanks, Dave

Hello JoAnna, Thank you for your question. The hose assembly of the Delta Trinsic Bar/Prep 9959-DST faucet will hang from the spout, if pulled out, until it is push back up to the magnet at the end of the spout. Our Pull-Out/Down faucet are not designed with retractable hose assemblies. Best regards, Tanya

Hi, Phil! Thank you for your question. The Delta RP77702 escutcheon plate will not fit with the Delta 9959-DST faucet. The only escutcheon plate that will work for this faucet is RP64070. Best Regards, Rosanna

Hi YT, Thank you for your question. Unfortunately, we do not make a Beverage faucet in the Matte Black finish. Venetian Bronze is a dark brown color with bronze highlights. Best regards, Jon

Thank you for your question. The pullout hose for this model is 62" leaving approximately 18"-22" of available hose length depending on the installation. Best regards, Edward

Thank you for your question, Brett! The Delta Trinsic Faucet models 9159-DST and 9959-DST are the same faucets, with the 9959-DST just being a smaller version of the kitchen faucet. The only reason we would not recommend using the 9959-DST is it may not have the reach that you would like to all corners of the sink. However, it would be a personal preference of the homeowner or installer. Best regards, Tanya

Hi, Cheryl! Thank you for your question and I am sorry to hear that the touch function is no longer working for your faucet. There is a battery pack located under the sink connected to the solenoid assembly. Batteries can be replaced with either 6 AA batteries or 6 C batteries. Best Regards, Rosanna

Thank you for your question. Delta Faucet model # 9959-DST can have the handle moved to the front. Keep in mind that it will make the hot and cold be side to side to operate and pull out to turn on the faucet.

Hi, Venessa! Thank you for your question, and I am sorry to hear that this happened to your handle. The handle assembly is available. The handle kit is RP62589AR. Here is a link to the part: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP62589AR Best Regards, Rosanna

Hi, Toby! Thank you for your question. The 9959-CZ-DST does have a red/blue indicator button on the handle button to indicate hot/cold temperature. Best Regards, Rosanna

Hi, Hiker! Thank you for your question. The Delta 9959-DST faucet at 40 PSI will give a 1.3 gpm flow rate. Best Regards, Rosanna

Thank you for your question, Phil! The optional A/C power supply EP73954 can be ordered separately provided you have a non-switched outlet below the counter. https://www.deltafaucet.com/parts-product-detail?modelNumber=EP73954 Best regards, Edward

Hi, JeffU! Thank you for your question. The sprayer assembly for the Delta 9959-CZ-DST faucet unscrews counterclockwise at the hose connection. Once removed, this can be soaked in a solution of 50% white vinegar and 50% water solution and can be soaked for an hour or even overnight. Best Regards, Rosanna

Hello Pete, Thank you for your question. The swivel for Delta model 9959-AR-DST can not be limited. However, there is a spout spacer built into it that prevents it from swiveling loosely. Best Regards, Courtney

Hi, Rodpod! Thank you for your question. We recommend to clean the sprayer assembly on the 9959-AR-DST faucet by removing the sprayer off of the hose and soaking the whole sprayer in a solution of 50% white vinegar and 50% water solution. You can soak for an hour, or even overnight to clean. Best Regards, Rosanna

Thank you for your question, Maria! We do not currently offer a Beverage faucet in the Trinsic collection, however, we do offer some models that would compliment this bar prep faucet. https://www.deltafaucet.com/kitchen/specialty-faucets/beverage Best regards, Edward

Hi, SFDave! Thank you for your question. The Voice Module can be purchased separately as part number EP100021. https://www.deltafaucet.com/kitchen/product/EP100021 Faucets with a Gen3L solenoid assembly are compatible for use with the Voice Module. Older incompatible solenoid assemblies are grey/silver while the compatible solenoid assemblies are all black. Please note that an Amazon Alexa-enabled device is required in order to use voice-activation. Please click the link below for more information about this feature. https://www.deltafaucet.com/Voice Best Regards, Rosanna

Hi, Chris! Thank you for your question. Unfortunately, we do not recommend using this unit with reverse osmosis. Only our Beverage Faucets are designed for use with an RO system. https://www.deltafaucet.com/kitchen/specialty-faucets/beverage Best Regards, Rosanna

Hello Jacob, Thank you for contacting us, I would be happy to help you. Our Delta model 9959-BL-DST has a flow rate of a maximum of 1.8 GPM @ 60 psi. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole

Hi Christine, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Trinsic® Single Handle Pull-Down Bar / Prep Faucet In Chrome MODEL#: 9959-DST does not allow for an RO system to be used, however our beverage faucets will allow for the RO system to be used. I have included a link below to our current beverage faucet. https://www.deltafaucet.com/kitchen/specialty-faucets/beverage Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hi Jaa957, thank you for contacting Delta Faucet Company! Our Delta Faucet 9959-BL-DST reaches 6 1/2" from the center of the valve to the center of the spout whereas the 9159-DST reaches 9 1/2" inches from the center of the valve to the center of the spout. Our Bar/prep faucets are recommended to be used in a bar/prep type of installation. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hi Bryan, Thanks for your question regarding 9959-CZ-DST! No, there is not a left-handed cartridge for this model. We recommend installing the faucet with the handle on the right. The handle operates by tilting away from the faucet to turn on and rotating forward to increase the temperature. Unfortunately, there is no way to reverse the movement, so if the handle is installed on the left or front, it will rotate backward. Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist

Hello Valued Customer, Thank you for contacting Delta Faucet Company! Please gather towels, a 5 GAL bucket, or a large bowl. 1. Unscrew the wand from the hose and check the inside of the wand for debris. With the wand removed, point the hose into the drain and turn the faucet on for 1 minute to flush the hose. *Please do not release the hose with the wand removed or it may retract into the faucet.* 2. Turn the handle to the off position, gather towels and place the bucket or large bowl under the sink, disconnect the hose assembly from the gray PEX tube. 3. Turn the water on and flush the PEX tube for 1 minute, turn the water off, and re-connect the hose. 4. Turn the water on and check for leaks. If you are still experiencing a low flow, the inlet tubing may need to be flushed. 1. Please shut off both hot AND cold water supplies. 2. Remove the COLD water line and point the line into the bucket. 3. Turn the HOT water on and allow the water to flow into the bucket for about a minute. 4. Turn the HOT water back off and install the cold water line correctly. 5. Remove the HOT water line and point the line into the bucket. 6. Turn the COLD water on and allow the water to flow into the bucket for about a minute. 7. Turn the COLD water back off and install the hot water line correctly. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hi Rich, Thank you for your question! Please see the following link for the technical specifications for this model. https://media.deltafaucet.com/SpecSheet/DSP-K-9159-DST%20Rev%20F.pdf Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Thank you for your question, Norm! No, we do not recommend installing model 9959-AR-DST in an outdoor setting. The sprayer is non-metallic. Best Regards, Benjamin

Hello Mimi Bee! Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. The Delta Trinsic® Single Handle Pull-Down Bar / Prep Faucet In Chrome model#: 9959-DST weighs 5.55lbs. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Carrie