Two Handle Widespread Bathroom Faucet in Polished Nickel

Hi, Brenda! Thank you for your question. Here is a link to the technical specifications sheet for the Delta 3597LF-MPU Faucet: https://media.deltafaucet.com/SpecSheet/DSP-L-3597LF-MPU-LHP%20Rev%20D.pdf Best Regards, Rosanna

yes small

Hi, Gail! Thank you for your question. The cached aerator in the Delta 3597LF-CZMPU is removable by an aerator wrench. The part number is RP52217. Here is a link to this part: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP52217 Best Regards, Rosanna

Hi, Truiitt! Thank you for your question. The Delta 3597LF-MPU Faucet includes everything needed to install the faucet to your vanity. Bet Regards, Rosanna

Thank you for your inquiry, jimd! The handles of the Delta Cassidy Lavatory 3597LF-SSMPU faucet can be purchased separately. The H297SS handle set can be purchased from any local or online dealer that sells Delta products and parts. https://www.deltafaucet.com/parts-product-detail?modelNumber=H297SS Best regards, Tanya

Thank you for your question, Cindy! The Delta Cassidy Lavatory 3597LF-SSMPU faucet is a 6" - 16" (152 mm-406 mm) centers install. However, the matching model 2597LF-SSMPU--H297SS is a 4"Centers (102 mm) unit. Please feel free to call, email, or message us on social if there is anything else you need. Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet

Hello RetiredPete, Thank you for your inquiry! Here are the step by step walk thru on how to install each stem unit and 1/4 turn stops, so the handle turn correctly. I hope the information is helpful. Hot side ~ The stem unit will go into the valve with the raised white portion of the stem toward the spout. When you install the stem into the valve, you should notice 2 notches in the brass valve body. The stem unit will have a piece in each side that will fit into the notches. These notches should be facing the 3 and 9 o'clock position, if you imagine a clock face. With the stem installed in the valve, you will need to insert the 1/4 turn stop into the slot in the front of the stem unit. Now you will want to tighten down the bonnet nut that screws onto the valve body. Once the nut is hand tight, you might need to reposition the brass arm that is straight up and down on the stem unit. The flat part of this arm should be facing away from the spout. So it should be in the 9 o'clock position. You can rotate this arm by grabbing a hold of it and just twisting it. Once you have it in the 9 o'clock position, you should be able to reinstall the handle and tighten the setscrew. Now when you turn the handle, it should turn toward you. Cold side ~ The stem unit will go into the valve with the raised white part away from the spout. So if you image a clock, the white piece of the stem will be facing the 3 o'clock position. Again, the stem should fit into the two notches at the 3 and 9 o'clock position. The 1/4 turn stop will actually be installed the the back side of the stem. Once that is installed, you can tighten the bonnet nut over the valve and screw it down just hand tight. Grab a hold of the brass arm and twist it until the flat part is facing away from the spout. Again, it will be in the 3 o'clock position just like the white part of the stem. Once that is facing the correct direction, you should be able to install the handle and turn it toward you. Best regards, Tanya

Hi, DonP! Thank you for your question. The Delta 3597LF-MPU Faucet does have a minimum clearance to back splash of 2.5". This measurement starts at the center of the hole for the spout and handles. Best Regards, Rosanna

Thank you for your question, LoraineS! The H297, H298 as well as the H295 handle assemblies are all interchangeable options. https://media.deltafaucet.com/PartsDiagram/DPD-L-3597LF%20Rev%20B.pdf Best regards, Edward

Hi Bruno, Thank you for your question. The model 3597LF-SSMPU has a max deck thickness of 1-3/32". You will need to order the RP10612 extension kit that adds 1" of max deck thickness to work with your 1-1/4" granite. Thanks, Dave

Hi, Nanny! Thank you for your question. The Delta 3597LF-MPU Faucet does not include hot and cold temperature indicators. The handle buttons to hide the set screws are designed to match the finish of the faucet. Best Regards, Rosanna

Yes

Hello Debbie! Thank you for your question regarding the Delta Faucet Model 3597LF-MPU! I am happy to help. The tailpiece for the pop-up drain is 4 5/8" long. Here is a link to the installation instructions: https://media.deltafaucet.com/MandI/86429%20Rev%20B.pdf Please see page 3 Please reach out to us directly if you need further assistance. Best Regards, Antoine

Thank you for your inquiry, BlueStar! The Delta Cassidy Lavatory 3597LF-SSMPU faucet is not manufacture with porcelain accented handle. However, you can purchase separately either the H277SS or H212SS handle sets for this faucet. https://www.deltafaucet.com/parts-product-detail?modelNumber=H277SS https://www.deltafaucet.com/parts-product-detail?modelNumber=H212SS Best regards, Tanya

Thank you for your question, Michael! The pop up assembly included with this model is intended to be used with a sink that also has overflow holes. We do offer assemblies that also do not use overflow holes. https://www.deltafaucet.com/search-results?searchTerm=Less+Overflow+&searchType=Delta_Default Best regards, Edward

Hi, Kate! Thank you for your question. The Delta 3597LF-MPU Faucet handles use a 3/32" Allen wrench to tighten. Best Regards, Rosanna

Hello Carol! Thank you for your question regarding the Delta Faucet Model 3597LF-MPU ! I am happy to help. As a global manufacturer, we source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured, or assembled, they are built to Delta Faucet Company's exacting specifications and are quality tested to ensure long-lasting performance. The location information on the back of the box will tell you where your specific faucet model was made. Please reach out to us directly if you need further assistance. Best Regards, Antoine

Hello, Thank you for your question. To better assist you. Please contact us at 1-800-345-3358. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Thank you for your cooperation. Best regards, Bethany

Hello Sprky! Thank you for your question! I do apologize that your faucet is leaking and we will be happy to help you. To repair your Delta 2597-PNMPU faucet you will need to replace the stem units, part number RP25513. Please contact us back for any further questions. Best Regards, Frank

Hello, Thank you for your question and we are happy to help. Unfortunately, we do not have any recommendations on how to remove silicon caulk from our products. We recommend getting in touch with your local hardware store. We apologize for any inconveniences. Best Regards, Themar Digital Communications Specialist

Hi cfstolte, Thank you for your question about the Delta Faucet model 3597LF-MPU. A stout toothpick or bamboo skewer can effectively work the button out. Look for the notch in the edge of the button as the focus of your prying. Please reach out if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Vegasgirl, Thank you for your question about the Delta Faucet model 3597LF-MPU. Please accept our apology for the inconvenience you are experiencing with a drip. We are happy to help! Running the faucet for a minute with the aerator removed can sometimes flush out trapped debris or sediment that can cause a drip. We recommend replacing the RP4993 seats and springs. The rubber seats can wear or be damaged over time. See step-by-step instructions here: https://support.deltafaucet.com/s/article/What-do-I-do-about-water-dripping-from-the-spout-of-my-two-handle-kitchen-faucet-1628028366794 Please reach out for further assistance or with any additional questions! Best Regards, Bryan

Hi Peko, Thank you for your question about the Delta Faucet model 3597LF-RBMPU Cassidy™ Two Handle Widespread Bathroom Faucet In Venetian Bronze. I am sorry this information was not readily available, and I am happy to help! Recommended maintenance is to replace the seats and springs RP4993. Also, clean and flush the vale to remove any trapped water debris or mineral deposits. https://www.deltafaucet.com/parts/product/RP4993.html Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hello tom hyatt, Thank you for your question, I am happy to help you. The measurements your looking for are located in the Technical specifications, please see the link below: https://media.deltafaucet.com/SpecSheet/DSP-L-3597LF-MPU-LHP%20Rev%20D.pdf Please contact us back for any further questions or concerns. Best Regards,Nicole

Hi Jeff, thank you for your question regarding 3597LF-MPU! RP10612 is the extension kit that adds 1" to the mounting. Please feel free to contact us directly if you have any questions or need additional assistance. Best Regards, Emma Digital Communications Specialist

Hi Patty, Thanks so much for contacting Delta Faucet Company about, 3597LF-MPU! I have included a link below to the parts diagram showing the RP25513 and RP4993 steams, seats, and springs. https://media.deltafaucet.com/PartsDiagram/DPD-L-3597LF-MPU%20Rev%20A.pdf Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi RK887, Thank you for your question regarding our Delta Faucet Delta Cassidy™ Two Handle Widespread Bathroom Faucet - Less Handles In Chrome MODEL#: 3597LF-MPU. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. It is recommended to flush the unit before installing new parts. I will provide directions below. 1. Please place a towel around the backside of the faucet. 2. Place the bucket over the top of the towel, have someone hold the bucket. 3. Turn on water supplies and flush the water for about 30 seconds to a minute. 4. Shut off water supplies and proceed to put the new parts in. Typically, the quarter-turn stops on the left (hot) handle will be on the front side (close to you) and the right (cold) handle will be on the backside (away from you). If you reinstall the handles and find that they aren't turning in the right direction, rotate the stem 180º and check for proper handle rotation. Thank you for being a loyal Delta Faucet customer. Please feel free to call, email, or message us on social if you need anything else. Best Regards, Themar Digital Communications Specialist

HI Lloyd! Thank you for your question! The spout assembly of the Delta Cassidy Lavatory 3597LF-PNMPU faucet is a fixed spout, it does not swivel. Best Regards, Tim

Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. The buttons are included with the handle kit. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Lyra, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist