Single Handle Bathroom Faucet in Stainless

Hi Steven S, Thank you for your question. The Delta Trinsic Lavatory 559LF-CZMPU faucet is not currently manufactured with the Touch2O technology feature. Best regards, Tanya

Hi, Tony! Thank you for your question. The Delta 559LF-BLMPU faucet does include the Metal Pop Up drain assembly in the matching Matte Black finish. Best Regards, Rosanna

Thank you for your question, Jimbo! Model 559LF-LPU will not include a pop-up assembly however this model is not offered in the Champagne Bronze finish. We apologize for any inconvenience this may cause. https://www.deltafaucet.com/bathroom/product/559LF-LPU Best regards, Edward

Thank you for your inquiry, Jean! The Delta Trinsic Lavatory 559LF-MPU faucet is 6 1/4" (159 mm) tall, with the handle in the off position and 7 1/4" (184 mm) in the full open position. Best regards, Tanya

Thank you for your question, Vicki! The Trinsic Collection does not offer a specific slide bar with hand shower and many of these units are designed to compliment various styles. The Compel collection is most often used in conjunction with Trinisc models. Below is a link to our Trinsic valve trims and shower head only models. https://www.deltafaucet.com/bathroom/showering/showerheads--handshowers?categories=Delta_Bathroom_Showering_Shower+Heads+%26+Hand+Showers_Hand+Showers&collections=Trinsic%C2%AE https://www.deltafaucet.com/bathroom/showering/tub-and-shower-faucets?categories=Delta_Bathroom_Showering_Tub+and+Shower+Faucets_Shower+Head+with+Valve&collections=Trinsic%C2%AE Best regards, Edward

Hello newhomeowner, Thanks for your question! The 72173 is a circular push pop up with overflow, while the 72172 is a circular push pop up without overflow. The 72174 is a square push pop up without overflow, while the 72175 is a push pop up with overflow. Either of these push pop ups could match this faucet, depending on your design preferences. I hope this helps! Best Regards, Justin

Thank you for your question, remv! The spout body and handle are metal (brass or zinc). Some of the internal components are non-metal, such as the PEX water ways. Best regards, Jon

Hi, Anon3600! Thank you for your question. The certifications for the low-lead compliance is on the technical specifications for this faucet. Here is a link to this: https://media.deltafaucet.com/SpecSheet/DSP-L-559LF-MPU%20Rev%20F.pdf Best Regards, Rosanna

Hi, Jacky! Thank you for your question. You can connect the Delta 559LF-MPU Faucet to an eye washer. However, you will need to purchase an adapter separately. The spout has a thread size of M16.5x1. You may use the gasket from the aerator, but another gasket may be needed to ensure a water-tight connection at the spout. Best Regards, Rosanna

Hi Heidi, Thank you for your question! We recommend to wipe the faucet down with a damp cloth. To help remove water spots you can use a 50/50 solution of white vinegar and water. For more information, please see our cleaning and care guide linked below. https://www.deltafaucet.com/design-innovation/inspiredliving/how-to-clean-a-faucet Best regards, Jon

Thank you DeltaFaucet11! I get it! It's the same part number, but with a qualifier. I saw that on the parts list, but it makes things difficult trying to find parts. But that's okay, I dismantled my aerators and removed the restrictions. Fortunately, it's a multi-piece design and I was able to remove the restrictions. The pink portion comes off with some coaxing and now I just have the plastic screen assembly in my faucets without the pink restrictions. On mixed hot an cold, I'm at about 2 GPM now! That's much better than what I had and better than the 1.5 would give me. For others interested in removing the restriction, gently squeeze the top of the aerator with pliers to release the top plastic screen, then use strong tweezers or needle nose pliers to pull the pink plastic insert out of the assembly. At the end, you'll have an aerator screen without restrictions. I suspect the different flow rate aerators have different colors to distinguish them, so your insert may not be pink if you don't have a 1.2 GPM insert. No worries, I'm sure it works the same way! And, you can easily put them back together if you want to go back to low flow! Happy washing! ksing44

Hi Rose1, Thank you for your question. The threaded portion of the flange is 1 3/8" and the top surface diameter is 2 1/8". This assembly should work with a 1 1/2" diameter drain. However, the depth of the hole must be 1 5/8" to 2 3/8". https://media.deltafaucet.com/SpecSheet/DSP-L-559LF-MPU%20Rev%20F.pdf Best regards, Tanya

Hi Lee, Thank you for your question! This model does not have a Handle Limit Stop to restrict the range of motion on the hot side. Thanks, Jon

Hi Rosanna, I know all about the 3 hole escutcheon plate, but I only have one hole and would like to use the faucet as pictured on your website. The reality is that the plate provides a much better attachment to the counterpart. To really provide a great faucet for your customers, there should be a smaller circular escutcheon plate and circular plastic gasket for the mounting the faucet. It's a great faucet, BUT there should be a smaller circular escutcheon plate and circular plastic gasket to mount it properly! It's a sloppy mount without any plate at all! If the smaller circular escutcheon plate and circular plastic gasket don't exist, I think you should take this conversation back to your designers and engineers. They'll know what I'm saying is true! Thank you, Ken

Hi Jan, Thank you for your question. The recommended minimum clearance to the backsplash for the model 559LF-CZMPU is 2-1/2". Here is a link to the spec sheet for this model. http://www.deltafaucet.com/customersupport/documentation/559lf-czmpu.html?document=ts&fromDetailArea=bath&documentIndex=0#flashWrapper Thanks, Dave

Dear Lauren, Thank you for your inquiry. Delta does make a .5 gpm aerator (RP73806) for the Delta Trinsic Lavatory 559LF-RBMPU faucet, that can be installed for lesser flow rate. Best regards, Tanya

Hello Taylor, Thank you for your question. Delta model 559LF-CZMPU only has one optional escutcheon that is 6" in length. This escutcheon does come with the faucet. Best Regards, Courtney

Thank you for your question, Donny! The supplies are flexible and we recommend looping them in most installations. However, you may cut the lines by following section B page 4 of the Installation Instructions. Please note that cutting the lines voids the warranty on this part and it is up to you to ensure a leak-free connection. https://media.deltafaucet.com/MandI/86674%20Rev%20D.pdf Best regards, Jon

Hi, eric16! Thank you for your question. The 559LF-BLMPU does have a 1.0 gpm aerator option. The part number for the aerator and wrench is RP73805. Here is a link to the part: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP73805 Best Regards, Rosanna

Hi Brownrick3, Thanks for your question regarding 559LF-SSMPU! Flushing your unit may resolve this concern, and I have included a link below on how to flush your unit. Please feel free to contact us with any questions or for further assistance. https://support.deltafaucet.com/s/article/What-do-I-do-if-my-lavatory-faucet-drips-from-the-aerator-1628028366791 Best Regards, Emma Digital Communications Specialist

Hi Barbara, Thanks so much for contacting Delta Faucet Company! No, the 559LF-SSMPU does not include a sprayer. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi LRRH, Thanks so much for contacting Delta Faucet Company! As a global manufacturer, we source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured, or assembled, they are built to Delta Faucet Company's exacting specifications and are quality tested to ensure long-lasting performance. The location information on the back of the box will tell you where your specific faucet model was made. The total makeup of our products is considered proprietary. But in general, the faucet or product may contain any or all of the following:  Bronze,  Brass,  Zinc,  Stainless Steel, Copper, Aluminum, PEX-C, Silicone, Synthetic rubber - EDPM, Santoprene, Vinyl, Nylon, Plastics, and Ceramics.  Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hi lcbell, Please accept our apology for the inconvenience you are experiencing with removing the handle. We are happy to help! If the faucet was made after 6/26/2022, the handle is removed by pulling the handle directly away from the faucet. Don't rock the handle back; pull it straight up. Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist (800) 345-3358

Hello kwhitt, Thank you for your question regarding the Delta Faucet Single Handle Bathroom Faucet, model 559LF-SSMPU! Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you as quickly as possible. The hole size is approximately 1 7/8". https://media.deltafaucet.com/SpecSheet/DSP-L-559LF-MPU%20Rev%20G.pdf Please feel free to contact us with any questions or for further assistance. Thank you for being a loyal Delta Faucet customer! Best Regards, Emma Digital Communications Specialist

Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for warranty information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Prateek, Thank you for your question regarding our Delta Faucet 559LF-SSMPU. Max. flow rate 1.2 GPM @ 60 psi, 4.5 L/min @ 414 kPa. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Andy, Thank you for your question about the Delta Faucet model 559LF-BLMPU. I recommend removing the aerator at the end of the spout with the included wrench to troubleshoot an issue with the faucet's flow rate. Clean the aerator and flush the faucet for a minute with the handle fully opened before reinstalling the aerator. The maximum flow rate is 1.2 gpm. Unfortunately, we don't carry a model with a higher flow rate. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello Cathie! Thank you for your question and we are happy to help! Unfortunately, we do not have a faucet that we are able to recommend for another product outside of our company. We apologize for any inconvenience. With any further questions or concerns, please do not hesitate to reach out to us directly. Best Regards, Carrie

Hello Shell! Thank you for your question. I am happy to help. The Delta 559LF-BLMPU has been available to order since 1/1/2020. Please contact us directly at 1-800-345-3358 for further assistance with this matter. Best Regards, Antoine

Hi Delta faucet, Thanks so much for contacting Delta Faucet Company about 559LF-BLMPU! This faucet does not include a soap dispenser, however the bottles are model specific, and we do not currently have a taller or more narrow version of the bottle. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist