Single Handle Pull-Out Kitchen Faucet in Matte Black

Model#: 16953-BL-DST
Single Handle Pull-Out Kitchen Faucet in Matte Black
Model#: 16953-BL-DST
List Price: $28310
PRODUCT FEATURES
Delta's exclusive DIAMOND Seal® Technology uses a valve with a tough diamond coating. InnoFlex® PEX waterways keep water inside the faucet out of contact with potential metal contaminants. This powerful combination brings you a faucet built to last up to five million uses. Only Delta faucets are equipped with Touch-Clean® soft, rubber nubbins that allow you to easily wipe away calcium and lime build-up with the touch of a finger. The included escutcheon completes the ensemble for a more finished look.
  • LEAD-FREE COMPLIANT: Not all faucets are certified to necessary safety standards. Delta goes above and beyond with product testing and quality to ensure each faucet meets plumbing safety standards, including NSF/ANSI 61 and 372.  
  • DIAMOND Seal Technology features a valve embedded with diamonds to ensure like-new operation for the life of the faucet
  • Meets standards set by Americans with Disabilities Act
  • Touch-Clean spray holes allow for easy removal of hard water build-up
  • Fits 1 or 3-hole installations with included 10-1/2 in. deck plate
  • Pull-out spout swivels 120degrees for added convenience
  • Pull-out spout operates in an aerated or spray mode via an easy push button
  • Red/blue graphics on handle button to indicate hot/cold temperature
  • Includes 3/8 in. O.D. straight, staggered PEX supply tubes - 35 in. (889 mm) and 36 in. (914 mm) long
  • Standard 3/8 in. (10 mm) compression gasket fittings
  • Integral double check valves in spout
Special Information
Warning Image
California Prop 65 WARNING
Technology and Special Features
ADA Compliant
Touch-Clean®
No-Lead Compliant
Diamond Seal® Technology
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Installation Information
1 or 3-hole 8" installation
1 or 3-hole 8" installation
Connection Type :
3/8" compression fittings
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
9-1/8
Valve Type:
DIAMOND(TM) Seal Valve

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
Rated 5 out of 5 by from Better than expected Replaced older, more expensive Delta faucet where cartridge could not be changed due to stripped set screw. Was height limited by cabinet above sink. Wanted magnetic coupling but unavailable in faucet that fit. Surprisingly, this faucet recoils and mates easier than the one it replaces.
Date published: 2026-02-06
Rated 5 out of 5 by from Great product. I have used this model for my rental business
Date published: 2025-12-08
Rated 1 out of 5 by from Don’t buy Don’t like the pull out part stick and the faucet part won’t move back and forth
Date published: 2025-03-29
Rated 3 out of 5 by from Beautiful faucet, worked well for first 2 years Beautiful faucet, worked well for a couple of years then began leaking (hard to shut off flow) due to cartridge (part # RP50587Y). Florida water is hard and hard on the cartridge. Delta is gracious enough to send replacement cartridges under warranty; otherwise, at $40 a pop for a new cartridge, I would not be able to afford to keep it. First cartridge lasted 2 years, the second lasted for almost 3 years. I miss the o-ring replacement type faucets. Rating would be lower but saved by the great warranty service.
Date published: 2024-07-24
Rated 3 out of 5 by from Flawed design, now leaks I purchased at Home Depot about a year ago and although it is pretty solid, the design of the switch makes it difficult to fully close consistently. Now, over time, the faucet has started to leak. I never had this issue with my Moen faucet because their switch/valve made it easier to fully shut off. I was hoping this faucet would last longer.
Date published: 2024-03-27
Rated 1 out of 5 by from Very disappointed I purchased this faucet and it worked well for a few months. Now the spray nozzle gets stuck in the faucet and nearly impossible to remove and insert as it should. I tried lubricants to help; however, to no avail.
Date published: 2023-11-25
Rated 5 out of 5 by from Easy install if you’re replacing a newer faucet It took my son and I a full day to install the faucet. I had a faucet that was about 15 years old, and it was leaking and in bad shape. I bought this faucet at Home Depot and brought it home just to find out the water lines were a different size. We had to make three trips back to Home Depot to find the right adaptor. If your faucet is over fifteen years old they changed the standard for faucets since then, but that was about the only problem we ran into a couple more hiccups because the directions were not that good. Other than that for the first day the water flow and sprayer worked great, compared to what I had it is a dream.
Date published: 2023-08-26
Rated 1 out of 5 by from 2'years and it broke, now it is leaking We installed this two years ago professional installed, now it's leaking from the top handle.
Date published: 2023-08-04
  • y_2026, m_6, d_13, h_13
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.46
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_241
  • loc_en_US, sid_16953-BL-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 7ms
  • reviews, product
Q&A

My black Grant faucet has a scratch in the pull-out handle/wand. Are replacements available/

Asked by: Bob1
Hi Bob, Thank you for your question about the Delta Faucet model 16953-BL-DST Grant® Single Handle Pull-Out Kitchen Faucet In Matte Black. We will be happy to assist you as quickly as possible. Yes, a replacement pull-out wand is available in Matte Black as part number RP70738BL. Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

My grant pull out faucet is dripping. How can I fix it?

Asked by: Starphil

Is there a way to lean out the aerator. About a month ago the flow stopped and I disconnected the hose and cleaned out some black particles. Since then the water comes out downward AND SIDEWAYS.

Asked by: Takicat
Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for warranty information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist
Answered by: Themar
Date published: 2026-01-13

How to increase the water flow 

Asked by: Ann1447
Hi Ann1447, Thank you for your question! Unfortunately there is not a way to increase the flow rate of this faucet. We apologize for any inconvenience this may have caused. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-02-14

We would like to know what the flow rate is on this particular faucet please?

Asked by: hi there
HHi hi there, Thank you for contacting Delta Faucet. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Our Delta Faucet DELTA® Grant™ Single Handle Pull-Out Kitchen Faucet In Chrome MODEL#: 16953-DST max. flow rate is 1.8 GPM @ 60 psi. Please see the specification sheet in the link below. https://media.deltafaucet.com/SpecSheet/DSP-K-16953-DST%20Rev%20E.pdf Thank you for being a loyal Delta Faucet customer. Please feel free to call, email, or message us on social if you need anything else. Best Regards, Themar
Answered by: Customer Service
Date published: 2024-03-28

I am going to buy a countertop dishwasher. What type of adapter would needed to attached to the tubing after the wand is removed?

Asked by: Mrs H
Hi Mrs H, Thanks for your question regarding 16953-DST! You can connect a portable dishwasher or water filter to any Delta kitchen faucet that is not a pull-out or pull-down design. Never connect a portable dishwasher to pull-out or pull-down kitchen faucets, as potential pressure fluctuations during dishwasher operation may result in the hose rupturing. Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-03-24

Wand separated from the hose while using, i was able to pushed it back together but i'm afraid it'll separate again, is there a clip holding the wand and hose together ? i cannot find a part on your parts diagram.

Asked by: drcf27
Hi Valued Customer, Thank you for your question! Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. The wand assembly is RP70738. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Themar
Date published: 2025-07-01

Sorry got my answer

Asked by: Frank
Hi Frank, Thank you for reaching out. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-04-16

We just purchased and installed a Grant model no. 16953-DST faucet and cannot figure out how to take the handle off if it needs adjusting.  We see the little red and blue dots under the handle.

Asked by: Shirley
Hi Shirley, Thank you for your question about the Delta Faucet model 16953-DST. The handle is removed by loosening the set screw underneath the cover button with red and blue dots. Work the button out with a small non-metallic tool, such as a toothpick, card, or the curved side of a paperclip. Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

How to fix a leak at the bottom of the faucet model 16953-ss-dst

Asked by: Lawrence
Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist
Answered by: Themar
Date published: 2025-10-24

How do I replace or clean faucet aerator to improve flow?

Asked by: Jumpinjimmy
Hi Jumpinjimmy, thank you for your interest in the 16953-SS-DST! The aerator can be removed with the wrench RP50815. Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

My Single Handle Pull-Out Kitchen Faucet in Stainless Model#: 16953-SS-DST is leaking at the base. Can I get a replacement part?

Asked by: Fred
Hi Valued Customer, Thank you for your question regarding our Delta Faucet. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Themar
Date published: 2025-01-09

My Grant™ Single Handle Pull-Out Kitchen Faucet in Chrome’s switch is stuck between the spray and the pour. I can’t find that part anywhere.  

Asked by: Michael
Hi Michael, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Single Handle Pull-Out Kitchen Faucet In Chrome MODEL#: 16953-DST wand button is not available separately, if the button is stuck we would recommend soaking the wand in a 50/50 solution of white vinegar and water. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Customer Service
Date published: 2024-03-28

I bought a model 16953-DST kitchen faucet in brushed nickel finish from Home Depot in July, 2013. Can I buy a replacement wand for this faucet?

Asked by: mwe63052
Hello mwe63052, Thank you for your question! I am happy to help you! Unfortunately, the wand to the Delta Faucet model 16953-DST is discontinued. Please contact us back for any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

what is the purpose of the red handle switch under the handle

Asked by: alhoop
Hi alhoop, Thanks so much for contacting Delta Faucet Company! The switch on the cartridge will allow for the faucet to only provide hot and cold or to allow a full range of temperature from hot, warm and cold. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

My Grant faucet leaks. Can we change some parts only? Is it under warranty? How can I fix this?

Asked by: Diane

Where are Delta Faucets made

Asked by: justUS
Hello justUS! Thank you for your question and we are happy to help! We apologize for this information not being readily available to you. As a global manufacturer, we source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured, or assembled, they are built to Delta Faucet Company's exacting specifications and are quality tested to ensure long-lasting performance. The location information on the back of the box will tell you where your specific faucet model was made. With any further questions or concerns, please do not hesitate to reach out to us directly! Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie
Answered by: Delta7
Date published: 2024-03-28

Looking for a kitchen faucet without the pull out design. Is there a model in the Grant series which does not have the pull out?

Asked by: AnnC
Hi AnnC, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Single Handle Pull-Out Kitchen Faucet In Chrome MODEL#: 16953-DST Grant faucet does not have a non pull down, however I have included below a couple links to some of our Single handle non pull down/out faucets. https://www.deltafaucet.com/kitchen/product/100-DST.html https://www.deltafaucet.com/kitchen/product/4297-AR-DST.html https://www.deltafaucet.com/kitchen/product/1997LF.html Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

what is needed to install. what size fittings? can i get a diagram?

Asked by: hank
Hi Henry, thank you for your interest in the 16953-SS-DST! Please refer to the Maintenace and Installation sheet and specification sheet in the links below. https://media.deltafaucet.com/MandI/106557%20Rev%20C.pdf https://media.deltafaucet.com/SpecSheet/DSP-K-16953-DST%20Rev%20E.pdf Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

My Grant pull-out kitchen faucet is dripping? How do I know what I need to replace and how do I do it?

Asked by: Joseph
Hi Joseph, Thank you for your question about the Delta Faucet model 16953-DST. Please accept our apology for the inconvenience you are experiencing with a drip. We are happy to help! I recommend flushing the faucet with the aerator or spray wand removed. If the issue remains, replace the RP50587 cartridge. See step-by-step instructions here: https://support.deltafaucet.com/s/article/What-do-I-do-if-my-single-handle-kitchen-faucet-drips-from-the-spout-outlet-DST-model Please reach out with any additional questions! Best Regards, Bryan
Answered by: Delta
Date published: 2025-09-22

The installation instructions, both online and in the box, are for model 106557. My faucet was installed with the handle stuck to the left. It works, but will not cross the midline to the right. I hope this is not correct!

Asked by: julpat
Hi julpat, Thank you for your question about the Delta Faucet model 16953-DST. I apologize that the included instructions are not model specific. This faucet's handle moves to the left and right to adjust the temperature. I recommend checking the position of the handle limit stop. To change positions of the handle limit stop: remove the handle; move the valve stem to the all cold position so the water is on; change the position of the handle limit stop; turn off the water; reinstall the handle. See page 8 of the installation manual for more information: https://media.deltafaucet.com/MandI/106557%20Rev%20E.pdf Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-02-21

where can i get additional pullout wands for my passover holiday ? thank you

Asked by: bryndie
Hi bryndie, Thank you for contacting us at Delta Faucet! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. The RP70738 wand assembly for this Delta Faucet model 16953-DST can be obtained through online retailers. Due to higher than normal demand on global supply chains and production capacities, we are not offering sales through our warranty line at this time. Please contact us directly by phone at 1-800-345-3358 or email at customerservice@deltafaucet.com if further assistance is needed at this time.   We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

What is the replacement cartridge  valve for this? Rp50587? 

Asked by: Mira
Hi Mira, Thanks so much for contacting Delta Faucet Company! The GRANT™ Single Handle Pull-Out Kitchen Faucet MODEL#: 16953-DST requires the Cartridge MODEL#: RP50587. Parts can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

We’ve had the 16953-DST faucet installed for 3 years with no issues. Recently the entire fixture part above the back of the sink has become quite wiggly. I went underneath the sink to check and found both screws stuck, probably from rust that I can’t see.

Asked by: PeteD
Hi PeteD, Thanks so much for contacting Delta Faucet Company about 16953-DST! The faucet can be tightened down by the mounting nut located in the center under the counter. If the screws are too tight, we would recommend soaking a rag in a 50/50 solution of white vinegar and water and wrapping it around the mounting nut covering the screws. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-07-05

The water flow through my stainless steel Grant kitchen faucet has dropped off recently. I've removed and cleaned the aerator without effect, and flow without the aerator installed is similarly reduced. How do I order a replacement head?

Asked by: MikeE
Hi MikeE, Please accept our apology for the inconvenience you are experiencing. We are happy to help! For the stainless Grant model 16953-SS-DST, a replacement spray wand is available as RP70738SS. Please reach out for further assistance or with any additional questions! Best Regards, Bryan
Answered by: Delta
Date published: 2026-02-12

After removed the handle, do i need a special tool to remove the 'nut'? and how?

Asked by: ming
Hi ming, Thank you for your question about the Delta Faucet model 16953-SS-DST. The finished cap should be able to unscrew by hand or with a channel strap. It is possible that there are mineral deposits built up underneath the cap. We recommend using a towel soaked with a 50/50 solution of white vinegar and cold water. Soak the area for a couple of hours or overnight is better. The bonnet nut under the cap should be tightened securely with a wrench and a wrench would be needed to unscrew the bonnet. Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Faucet stem squeaks when turned side to side (sink to sink)

Asked by: BernieT
Hi BernieT, Please accept our sincere apology for the inconvenience you are experiencing. We are happy to help! The noise is caused by a worn or damaged o-ring part number RP44648. To remove the faucet hub, turn off the water, disconnect the hose under the sink, pull the hose up and out of the faucet, then remove the handle and cap. Lift the hub off of the valve to change the o-ring. Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Delta
Date published: 2025-07-25

My 16953 SS DST is hard to regulate temperature in and recently become hard to shut off. Is there a part I need to replace?

Asked by: David
Hi David, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. We will need more information to better assist you. Please send us an email at customerservice@deltafaucet.com. Best Regards, Skyler
Answered by: Customer Service
Date published: 2024-03-28

What size Allen wrench is needed to tighten handle? Or other type wrench if not Allen?

Asked by: David
Hello David! Thank you for your question and we are happy to help! The Allen wrench is used to tighten the set screw in the handle and you would need a 1/8th Allen wrench. To tighten the bonnet nut, we recommend using a crescent wrench, and to tighten anything on the exterior where the finish could be damaged, we recommend a strap wrench or putting a microfiber cloth underneath your crescent wrench to protect the finish. With any further questions or concerns, please do not hesitate to reach out to us directly. Best Regards, Carrie
Answered by: Delta7
Date published: 2024-03-28

Have Delta kitchen faucet model 16953-DST. Have it for many years very happy. It has start to give me a problem shutting it off. I have to keep moving it to stop it from leaking. Is there any fix for this or is it time for a new one?

Asked by: Kate
Hi Kate, Thanks for your question regarding 169536-DST! We recommend flushing your unit and replacing RP50587. Flushing instructions: https://support.deltafaucet.com/s/article/What-do-I-do-if-my-single-handle-kitchen-faucet-drips-from-the-spout-outlet-DST-model Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-09-16
  • y_2026, m_6, d_13, h_13CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.46
  • cp_3, bvpage2n
  • co_hasquestionsanswers, tq_176
  • loc_en_US, sid_16953-BL-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 54ms
  • questions, product
PART LIST

PART LIST

Image-RP70738

Delta®

Delta® Wand Assembly - Pull-Out

List Price: $74.25

RP70738

5.00 2
Image-RP63265

Delta®

Delta® Adapter - Slip Joint

List Price: $58.55
Online Price: $46.84
Free Ground Shipping All Orders $49+

RP63265

Image-RP70739

Delta®

Delta® Metal Lever Handle Kit

List Price: $67.60
Online Price: $54.08
Free Ground Shipping All Orders $49+

RP70739

Image-RP63264

Delta®

Delta® Adapter Kit - PEX Compression (10)

List Price: $92.90
Online Price: $74.32
Free Ground Shipping All Orders $49+

RP63264

Image-RP50815

Victorian®

Victorian® Aerator & Wrench - Pull-Out or Pull-Down

List Price: $31.10
Online Price: $24.88
Free Ground Shipping All Orders $49+

RP50815

4.56 27
Image-Master-RP51502

Delta®

Delta® Bonnet Cap

List Price: $18.05 - $49.70
Free Ground Shipping All Orders $49+

RP51502

Image-Master-RP44645

Valdosta®

Valdosta® Escutcheon - 3 Hole - Pull-Out Kitchen

List Price: $36.25 - $85.05
Free Ground Shipping All Orders $49+

RP44645

Image-RP63263

Delta®

Delta® Adapter Kit - PEX Compression (4)

List Price: $45.35
Online Price: $36.28
Free Ground Shipping All Orders $49+

RP63263

3.67 3
Image-RP44648

Palo®

Palo® O-Ring - Pull-Out

List Price: $13.60
Online Price: $10.88
Free Ground Shipping All Orders $49+

RP44648

Image-RP47666

Delta®

Delta® Set Screw

List Price: $13.90
Online Price: $11.12
Free Ground Shipping All Orders $49+

RP47666

1.00 1
Image-RP49835

Delta®

Delta® Mounting Nut, Washer & Screws (2)

List Price: $42.80
Online Price: $34.24
Free Ground Shipping All Orders $49+

RP49835

1.00 2
Image-RP47271

Allora®

Allora® Set Screw & Button

List Price: $26.85
Online Price: $21.48
Free Ground Shipping All Orders $49+

RP47271

Image-Master-RP51490

Delta®

Delta® Escutcheon - Pull-Out

List Price: $22.20 - $29.35
Free Ground Shipping All Orders $49+

RP51490

Image-RP13938

Delta®

Delta® O-Ring

List Price: $8.25
Online Price: $6.60
Free Ground Shipping All Orders $49+

RP13938

4.50 2
Image-RP50390

Delta®

Delta® Quick Connect Hose & Clip - 54" - Pull-Up / Pull-Down DST Faucets

List Price: $108.65
Online Price: $86.92
Free Ground Shipping All Orders $49+

RP50390

3.96 27
Image-RP51503

Delta®

Delta® Bonnet Nut w/ Valve Seal

List Price: $35.10
Online Price: $28.08
Free Ground Shipping All Orders $49+

RP51503

5.00 3
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.