Single Handle Pull-Down Kitchen Faucet with ShieldSpray® Technology
Foundry™
Model#: 19744Z-SPSD-DST
Single Handle Pull-Down Kitchen Faucet with ShieldSpray is rated
out of
5 by
6.
Compare
Favorite
Add To A Project
View my Items
Print
Finish:
Spotshield Stainless
List Price (US $):
$398.35
-
Water-Efficient
-
No-Lead Compliant
- ShieldSpray® Technology powers off the mess without making a mess
- MagnaTite Docking uses a powerful integrated magnet to snap your faucet spray wand precisely into place and hold it there so it stays docked when not in use and doesn't droop over time
- SpotShield™ Technology helps your faucet or shower stay cleaner, longer by resisting water spots and fingerprints
- Soft, rubber Touch-Clean Spray Holes allow you to easily wipe away calcium and lime build-up with the touch of a finger
- DIAMOND™ Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
- Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines
- Includes coordinating soap dispenser
- Fits 1, 2, 3, or 4-hole installations with included escutcheon
- Optional escutcheon included for use with additional mounting configurations and a cohesive look
- ADA compliant
- High-arc pull-down swivels 360degrees
ShieldSpray®
DIAMOND™ Seal Technology
Installation Information
1, 2, 3, or 4-hole 8" installation
- Escutcheon: Optional Escutcheon Included
- Flow Rate: 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa
- Spout Height: 19-1/2"
- Spout Length: 9"
- Fittings Type: 3/8" compression fittings
- Deck Thickness: 2.5"
- Supply Lines: Included InnoFlex® Pex-C Supply Lines
- Valve Type: Euromotion DIAMOND™ Valve
Rated 4 out of
5
by
MrCleveland from
No Soap Please
Overall a good product, but Delta should have an option to purchase the faucet without the soap dispenser.
Date published: 2018-01-13
Rated 5 out of
5
by
Omaha24 from
Great Faucet!!
I was first intrigued by the look of this faucet, but have been pleasantly surprised at how good of a job it does cleaning plates and such. The sprayers are aweseome, and the host is pretty flexible to get all parts of the sink. Great faucet, you can't go wrong!!
Date published: 2017-11-27
Rated 5 out of
5
by
samclam from
simple install
no special tool needed to install. I needed a 5/32 nut driver . I could have used a phillips screwdriver. This isn't normal, they made it so simple. Fewer moving parts. On my model, i only have to move the faucet head (it is on a stiff hose coming from the body in an arc) around the sink. I don't have to pull a hose to spray around the sink. I've had the hose pull loose from the fixture. Messy cleanup-lots of water.
Date published: 2017-11-23
Rated 4 out of
5
by
Fitzy from
Pretty solid overall.
Easy to install. I like that there are no moving hoses underneath the cabinet. I do prefer the material used for the hose instead of the 'spring like' look. The spring can be too restrictive. I'm not a fan of the pin point sprayer with shield. The pin point stream doesn't seem to really do anything. The splash shield is a neat idea. I wish the spray option was a full circle. It has lots of power so I tend to use that for plate rinsing. I have seen a brand sprayer that was a line and that worked well for plate pre-rinsing - moved the stuff linearly. Love the magnet! Keeps the head in place perfectly and releases easily.
Date published: 2017-10-02
Rated 5 out of
5
by
Jerbo46 from
Good stuff
We love the faucet very much, great features easy to use and does the job well.
Date published: 2017-09-07
Rated 5 out of
5
by
Joette from
Love not pulling hose out
I installed this in a small motorhome. I got so tired of fighting the pull out hose of the original faucet because of everything stored under the sink, to get the faucet head where I wanted it.
Now I can put the faucet head wherever I could before, but without all the hassles.
I would like it even more but, the water saver it has built in, combined with the one in the motorhome already makes for even less water pressure than I had before.
I would definitely buy it again; I just wish Home Depot wasn't the only company carrying it right now, that's very limiting for where I'm located.
Date published: 2017-08-21
1.) Does the faucet itself swivel from side to side? I have a two bay sink and would need the faucet to swivel. 2. I would like to mount the soap dispenser in the escutcheon plate. Is it possible to drill a hole in the plate to allow for it?
Hi, Monica!
Thank you for your question. The faucet spout does swivel 360 degrees. We do not recommend to drill out a hole in the escutcheon plate for the soap dispenser as modifying the faucet in anyway may result in voiding the warranty.
Best Regards,
Rosanna
Date published: 2018-06-01
Can the handle be installed on the front if there is an issue with backslash clearance?
Hello CjMoose,
Thank you for your question. We recommend installing the faucet with the handle on the right. The handle operates by tilting away from the faucet to turn on. The vertical (back) position gives cold water and rotating the handle forward provides hot. Installing the handle in front could cause an issue with adjusting the temperature or turning the faucet on or off.
Best regards,
Tanya
Date published: 2018-05-01
How do I remove the spray head so I can clean it?
Hi, Ken45!
Thank you for your question. The spray head can be removed by pushing in on the small button at the sprayer. While pushing in, turn the sprayer assembly counterclockwise.
Best Regards,
Rosanna
Date published: 2018-02-15
Is the hose replicable in the event of damage?
Thank you for your question, KenKos! The hose assembly of the Delta Foundry Kitchen Pull-Down 19744Z-SPSD-DST faucet is replaceable, part number RP90284SP.
https://media.deltafaucet.com/PartsDiagram/DPD-K-19744Z-SD-DST.pdf
Best regards,
Tanya
Date published: 2018-02-06
Just curious what the reach is of the hose when not connected to the magnetic hose latch? Is there any extra play that hangs down on the inside like most socks do now.
Riachan,
Thank you for your question! When undocked, the wand will almost hang down to the deck surface. When stretched out, the wand reaches about 16" from the center of the faucet while still being able to point straight down.
Best regards,
Jon
Date published: 2018-02-01
Is the hole for the soap dispenser the same size hole as the faucet?
Dear Kelley Niemasz,
Thank you for your inquiry! Yes, the hole size for the Foundry Kitchen 19744Z-SPSD-DST faucet and soap dispenser requires 1 5/16" - 1 1/2" (33-38 mm) hole size.
https://media.deltafaucet.com/SpecSheet/DSP-K-19744Z-SD-DST%20Rev%20A.pdf
Best regards,
Tanya
Date published: 2018-01-23
Can this be installed with the handle on the left?
Thank you for your question, Stephanie! We recommend installing the faucet with the handle on the right. The handle operates by tilting away from the faucet to turn on. The vertical (back) position gives cold water and rotating the handle forward provides hot. Unfortunately, there is no way to reverse the movement, so if the handle is installed on the left, it will rotate backwards.
Best regards,
Jon
Date published: 2018-01-17
Does this have a removeable restrictor
Can I remove the restrictor to get 2.2gpm flow rate?
Thank you for your question David. This unit is designed to provide a flow rate of 1.8 gallons per minute. We do not recommend to remove or modify the restrictor.
Best regards,
Jon
Date published: 2017-06-28
