Single Handle Pull-Out Kitchen Faucet in Matte Black

Hi Jess, Thank you for your question. We measure the water output by flow rate. You can reduce the flow rate from 1.8 to 1.5 gallons per minute using the RP61607 adapter between the hose and the faucet. This should help reduce any splashing. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP61607 Best regards, Jon

Chrome and plastic

Hi, Keith! Thank you for your question. The Innoflex® supply lines are 32". Best Regards, Rosanna

Hi Potzer, Thank you for your question! Below is the cleaning and care information for our products: Always blot dry any water from faucet surface. Allowing water to evaporate on the surface can lead to build up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean soft cloth should help keep your product looking beautiful. To remove water spots, use warm water and a soft, damp cloth. Hard water stains may be removed using a 50/50 solution of white vinegar and water. Make certain that you rinse thoroughly with water afterward. If additional cleaning is required, all of our finishes may be cleaned with the following household cleaners: Formula 409® Antibacterial All Purpose Cleaner, Fantastik® All Purpose Cleaner, or Windex® Original Glass Cleaner, when used according to the manufacturers' instructions for use. Avoid using the following which can damage your finish: Avoid industrial cleaners and abrasive cleaners, such as those used for toilet bowls, green Scotch-Brite heavy duty scrub sponges, Scrubbing Bubbles Bathroom Cleaner and Lysol Basin Tub, Soft Scrub, and Tile Cleaner. Avoid products that state on the label that they remove tarnish and rust, and those containing hydrofluoric, hydrochloric and/or phosphoric acids and caustic agents. Avoid harsh abrasives or polishes Avoid bleach-based cleaners Best regards, Brandis

Thank you for your question, Sadia. We recommend having a hole size of 1 1/4" to 1 1/2". Please refer to the Technical Specifications for more information. https://media.deltafaucet.com/SpecSheet/DSP-K-4159-DST%20Rev%20C.pdf Best regards, Jon

Hi skyguy, Thank you for your question. Delta Faucet model # 4159-AR-DST has a 1.8 gpm at 60 psi which is the highest water flow allowed by current legislation. We do not recommend taking out the flow restrictor and it will void the warranty if it is removed. When the wand is switched from spray to stream, it will stay in this mode until it is switched back whether the faucet is on or off. The Artic Stainless finish is closely related to the stainless steel finish of appliances that are out in the market today. Compared to our Stainless Steel finish, it has a bluer tint where the Stainless Steel has a golder tone.

Thank you for bringing this to our attention, Roman! Sorry for any inconvenience. The overall height of the faucet is 11 25/64" when off (12 41/64" when on). Spout height from the deck to the aerator is 6 39/64". Please refer to the Technical Specifications for more information. https://media.deltafaucet.com/SpecSheet/dsp-k-4159-dst_C.pdf Best regards, Jon

Hi, Mara! Thank you for your question. We appreciate your interest in Delta faucets. All Delta faucets feature the same quality parts, materials, and workmanship, no matter what kind of dealer sells them. Delta retail dealers usually sell faucets that include the handles in the boxes. Plumbing professionals and Delta Studio Showrooms sell faucets where the faucets and handles are packaged and sold separately ("LHP" models), giving the customer some additional styling choices. However, the quality of all Delta faucets is the same. The warranty is the same as well. Here is a link to the warranty breakdown: https://www.deltafaucet.com/service-parts/warranty Best Regards, Rosanna

9"

Hi, Fusionnm! Thank you for your question. We do not recommend to connect a water filter to the pull out sprayer assembly as potential pressure fluctuates during water filter operation may result in the hose rupturing. Best Regards, Rosanna

Hi Aaron, Thank you for your qusetion. We manufacture Delta faucets in our plant facilities in Greensburg, Indiana; Jackson, Tennessee; London, Ontario, CA; and Panyu, China. As a global manufacturer, we also source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured or assembled, they are built to Delta Faucet Company’s exacting specifications and are quality tested to ensure long-lasting performance. The location information on the back of the box will tell you where your specific faucet model was made. Best regards, Jon

Thank you for your inquiry, Holly! The Delta Trinsic Pull-Out Kitchen 4159-KS-DST faucet has a spout length of 9 1/4" (235 mm). The hose will provide about 30" of reach from the end of the spout. We do not manufacture any extensions for our spouts and we also do not recommend attaching anything to our pullout wand assemblies. Best regards, Tanya

Hi, BA2012! Thank you for your question. The Delta 4159-DST Faucet is available in Chrome, Black Stainless, Matte Black, and Arctic Stainless Finishes. Best Regards, Rosanna

Hi Rose, Thank you for your question. The hose has a braided nylon covering. The hose assembly is built to last, will not rust/corrode, and is quieter to pull out than metal coil hoses. It can be cleaned with a cloth or rag and a 50/50 white vinegar and water solution. Best regards, Jon

Hi, Jaja! Thank you for your question. The Delta 4159-DST Faucet sprayer mode selector does not need to be held down. The sprayer mode button does lock into the mode selected. The faucet does not feature our MagnaTite Docking as the sprayer sets into the body hub. MagnaTite Docking is usually featured on our Pull-Down sprayer faucets. The 4159-DST is a Pull-Out sprayer faucet. Best Regards, Rosanna

Hi Terry, Thank you for your question! The hose will provide about 30" of reach from the end of the spout. Best regards, Jon

Hi LowWaterPressureDIY, Thank you for your inquiry! The hose assembly of the Delta Trinsic Pull-Out Kitchen 4159-DST faucet simply unscrews from the end of the wand/sprayer assembly. Best regards, Tanya

Hello socalowner! Thank you for your question regarding Delta Trinsic Single Handle Pull-Out Kitchen Faucet Model 4159-DST! I am happy to help. Here is a link to the parts diagram for the faucet. It will show how the faucet is assembled: https://media.deltafaucet.com/PartsDiagram/DPD-K-4159-DST.pdf Please reach out to us directly if you need further assistance. Thank you for being a loyal Delta customer. Best Regards, Antoine

36"

Hi NanaB, Thank you for your question about the Delta Faucet model 4159-BL-DST. This faucet does not have a removable aerator. To troubleshoot an issue with the spray wand, we recommend soaking in 50/50 white vinegar and water, then rinsing. This will help remove any buildup of mineral deposits. With the sprayer hose secured, the wand can be unscrewed from the hose and then clean any trapped debris from the connection or screen. Please contact us directly for further assistance or if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello Terry! Thank you for your question and we are happy to help! Unfortunately, the aerator in the Delta Single Handle Pull-Out Kitchen Faucet Model 4159-BL-DST is not replaceable. We recommend replacing the wand which is RP74605BL. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta customer. Best Regards, Carrie

Hello Laurie! Thank you for your question and we are happy to help. Unfortunately, we do not make a "Brushed Stainless" finish. The closest to Brushed Nickel and Stainless in the model Trinsic® Single Handle Pull-Out Kitchen Faucet would be the 4159-AR-DST in Arctic Stainless. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hi Chance, Thank you for your question about the Delta Faucet model 4159-BL-DST. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue! The noise is likely caused by water debris trapped in the faucet. We recommend flushing the faucet and replacing the RP73000 cartridge if the issue remains. The troubleshooting is the same as if the faucet was dripping. See here for instructions. https://support.deltafaucet.com/s/article/What-do-I-do-if-my-single-handle-kitchen-faucet-drips-from-the-spout-outlet-DST-model Please contact us directly if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hello Wondering Don, Thank you for your question! I am happy to help you! Our Delta kitchen faucets do not come with a kitchen drain assembly and we do not currently have a matte black kitchen sink drain. Please contact us back for any further questions. Best Regards, Nicole

Hello Sissy47, Thank you for contacting us, I would be happy to help you. To help make sure there is no debris in the Delta faucet model 4159-L-DST, we recommend doing a flush. I have included flushing instructions below. Remove your aerator, wand or hose to check the flow through the unit without that part installed. Soaking the part in a 50/50 mixture of white vinegar and water could help remove any particles or debris blocking the flow. Next, check the supply lines for debris: Turn the supply off to both the hot and cold-water lines. Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water. Next, disconnect the hot water supply line and place it inside of a bucket. Once the line is securely positioned into the bucket, turn on the cold-water supply. Lastly follow the same steps for the cold water now. Please contact us back if you have any questions or need further assistance. Best Regards, Nicole

Hello Dennis! Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. For the Delta TRINSIC® Single Handle Pull-Out Kitchen Faucet MODEL#: 4159-BL-DST you will need a 1 1/4" to 1 1/2" (32 mm to 38 mm) hole. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie

Good morning Sharon, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet DELTA® TRINSIC® Single Handle Pull-Out Kitchen Faucet MODEL#: 4159-DST overall height with the handle in the open position is 12 41/64". Here is the specification sheet. https://media.deltafaucet.com/SpecSheet/dsp-k-4159-dst_C.pdf Thank you for being a loyal Delta customer. Please contact us back with any further questions. Best Regards, Themar

Hi Mer1972, Thank you for your question about the Delta Faucet model 4159-AR-DST. A replacement hose is available as RP50390 https://www.deltafaucet.com/parts/product/RP50390.html Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi jeff, Thank you for contacting us at Delta Faucet! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Please see the following link for the parts diagram for this Delta Faucet model 4159-AR-DST Trinsic® Single Handle Pull-Out Kitchen Faucet In Arctic Stainless. https://media.deltafaucet.com/PartsDiagram/DPD-K-4159-DST.pdf Please contact us directly by phone at 1-800-345-3358 or email at customerservice@deltafaucet.com if further assistance is needed at this time.   We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim Digital Communications Specialist