Single Handle Pull-Down Kitchen Faucet with ShieldSpray® Technology in Arctic Stainless
Model#:
9178-AR-DST
PRODUCT FEATURES
Delta® MagnaTite® Docking uses a powerful integrated magnet to pull your faucet spray wand precisely into place and hold it there so it stays docked when not in use. Delta® ShieldSpray® Technology cleans with laser-like precision while containing mess and splatter. A concentrated jet powers away stubborn messes while an innovative shield of water contains splatter and clears off the mess, so you can spend less time soaking, scrubbing and shirt swapping. Delta® faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. Kitchen faucets with Touch-Clean® Spray Holes allow you to easily wipe away calcium and lime build-up with the touch of a finger. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. *Industry standard is based on ASME A112.18.1 of 500,000 cycles.
- LEAD-FREE COMPLIANT: Not all faucets are certified to necessary safety standards. Delta goes above and beyond with product testing and quality to ensure each faucet meets plumbing safety standards, including NSF/ANSI 61 and 372.
- MagnaTite® Docking uses a powerful integrated magnet to snap your faucet spray wand precisely into place and hold it there so it stays docked when not in use and doesn’t droop over time
- ShieldSpray® Technology powers off the mess without making a mess
- Concentrated stream cuts through messes and innovative water shield reduces splatter
- Soft, rubber Touch-Clean® spray holes allow you to easily wipe away calcium and lime build-up with the touch of a finger
- DIAMOND™ Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
- Everything you need is together in one convenient box, including integrated InnoFlex® PEX supply lines
- 1 or 3-hole 8" installation
- Optional escutcheon included for use with additional mounting configurations and a cohesive look
- ADA Compliant
- The high-arc, gooseneck design swivels 360 degrees with a 20-in. retractable hose for added convenience during everyday kitchen tasks
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Technology and Special Features
ADA Compliant
ADA Compliant
Some people, and some local codes, require fixtures that are compliant with the Americans with Disabilities Act. If someone may visit who has special needs, or if you believe future buyers might appreciate this feature, Delta offers a range of compliant fixtures.
No-Lead Compliant
No-Lead Compliant
Tested and certified to NSF/ANSI Standard 61, which sets the criteria for product safety. The lined waterways in Delta® faucets help prevent leaching of metals.
Water-Efficient
Water-Efficient
CalgreenCert Tooltip information here...
Diamond Seal® Technology
Diamond Seal® Technology
DIAMOND™ Seal Technology is Delta’s revolutionary new water delivery system. An internal contact surface made up of tiny diamonds makes the valve leak-free and extraordinarily durable. It also keeps water free of contact with potential metal contaminants.
ShieldSpray®
ShieldSpray®
ShieldSpray® Technology cleans with laser-like precision while containing mess and splatter. A concentrated jet powers away stubborn remnants of food while an innovative shield of water surrounds the jet and mess to keep the splashing contained, so you can spend less time soaking, scrubbing and shirt swapping.
MagnaTite® Docking
MagnaTite® Docking
The pull-down spray head utilizes a powerful magnet which keeps the wand securely in place when not in use. No more dangling!
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Resources
Installation Information
1 or 3-hole 8" installation
Connection Type :
3/8" compression fittings
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
14-27/32
Valve Type:
DIAMOND(TM) Seal Valve
INSTALLATION SUPPORT
Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.
REVIEWS
Q&A
Looks like there is a swivel at base of faucet. So do you pull the handle out for on, toward you for cold and away from you for hot? How much clearance do you need at the back to turn hot fully on so the handle doesnt hit wall or backsplash behind it.
Hi, GGGA!
Thank you for your question. The Delta 9178-AR-DST Faucet swivels 360 degrees at the high arc spout. The handle turns on and away from the faucet for cold and the handle turns back for hot water. We recommend a minimum 2 1/2" (64 mm) clearance to back splash.
Best Regards,
Rosanna
Date published: 2024-03-28
How do I get into the faucet to adjust the gear-like piece that adjusts the temperature? The water gets scalding hot.
All our other faucets in our house don't get as hot as our kitchen. The cold water never really gets that cold either.
Hi Charlotte,
Thank you for your question. To adjust the Handle Limit Stop, remove the red/blue button, loosen the set screw with an 1/8" Allen wrench, and pull off the handle. The red switch on the top of the cartridge can be flipped to the right to limit the range of the handle on the hot side.
While this can be done without turning off the water supply, we recommend to turn them before disassembling the faucet.
Best regards,
Jon
Date published: 2016-11-29
What is the difference between the "Arctic Stainless" and "Stainless" finish? Are both products made of stainless steel? Is one more durable?
Hi Alevine,
Thank you for your question. The Artic stainless finish will have a blue tint to it, while the stainless steel will have a gold tint. Both finishes are durable and warrantied for the life of the faucet to the original purchaser. The faucets are finished in stainless steel, not made of stainless.
Thanks,
Dave
Date published: 2024-03-28
Can you purchase a replacement spray head for Delta 9178-AR-DST?
Hi, Homeowner!
Thank you for your question. The Delta 9178-AR-DST Faucet sprayer is available as a replaceable part. The part number is RP90841. Here is a link to the part:
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP90841
Best Regards,
Rosanna
Date published: 2024-03-28
In order to get the water spray to keep spraying, do you have to hold the black button down or will it keep spraying on it's own?
Thank you for your question, GGGA! You should only have to press the button on the wand once. The wand will stay in spray mode, until the button has been released.
Best Regards, Benjamin
Date published: 2024-03-28
For a 9178AR-DST single hole instillation, please provide the minimum hole diameter.
Thank you for your question, williedrip! All necessary dimensions and measurements needed for installation can be found on the Technical Specifications Sheet below.
https://media.deltafaucet.com/SpecSheet/dsp-k-19978-sd-dst_D.pdf
Best regards, Edward
Date published: 2024-03-28
Pull down sprayer
Does this model have or do any delta pull-down faucets (with the magnetic feature) also have a sprayer that has an on-off button? What I'm looking for is a pull-down which has both the magnetic feature AND spray with on-off switch and aeration options. Thanks.
The Leland faucet has a selector switch for aerated spray or full...and the spray isn't a wide spray meaning it's very controlable even when not pulled out of the magnetic base. Included in the box is a tool for removing the aerator portion for cleaning of calcium/lime deposits. Suggest using vinegar for the disolving of these deposits and not a "lime away" type chemical. I don't know if the finish would be harmed by the "lime away" product but I'm not willing to experiment.
Date published: 2024-03-28
Where is 9178-AR-DST manufactured?
Thank you for your question, thearcher01! Model 9178-AR-DST and all of our faucets are manufactured in our plant facilities in Greensburg, Indiana; Jackson, Tennessee; London, Ontario, CA; and Panyu, China.
As a global manufacturer, we also source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured or assembled, they are built to Delta Faucet Company’s exacting specifications and are quality tested to ensure long-lasting performance.
Best Regards, Benjamin
Date published: 2024-03-28
Sometimes when I turn the faucet spout it makes a squeaking noise. Can it be lubricated ? How and with what? Delta 9178-DST
Thank you for your question, John! We do no recommend lubricating any parts of a Delta faucet unless instructed to do so. The noise you are hearing may be caused by a damaged friction spacer, part number RP60923. For further assistance with this part, please contact us directly.
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP60923
Best regards, Edward
Date published: 2024-03-28
is the metal part below the sink brass or some other metal? I am very concerned about rust and other corrosian.
Thank you for your question, Caja! The threaded shank of the Delta Leland Pull-Down Kitchen 9178-AR-DST model is brass.
Best regards,
Tanya
Date published: 2024-03-28
Finish protection for arctic stainless
Is there any protective finish that can be used for the arctic stainless (Leland)? Wax or a synthetic coating?
Dear Aclmark,
Thank you for your question. Delta does not recommend and advises that no polishes or coatings should be used on any of our finishes. The cleaning care directions from the warranty states:
Always blot dry any water from faucet surface. Allowing water to evaporate on the surface can lead to build up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean soft cloth should help keep your product looking beautiful. To remove water
spots, use warm water and a soft, damp cloth. Hard water stains may be removed using a 50/50 solution of white vinegar and water. Make certain that you rinse thoroughly with water afterward.
If additional cleaning is required, all of our finishes may be cleaned with the following household cleaners: Formula 409® Antibacterial All Purpose Cleaner, Fantastik® All Purpose Cleaner, or Windex® Original Glass Cleaner, when used according to the manufacturers' instructions for use.
Avoid using the following which can damage your finish:
Avoid industrial cleaners and abrasive cleaners, such as those used for toilet bowls, green Scotch-Brite heavy duty scrub sponges, Scrubbing Bubbles Bathroom Cleaner and Lysol Basin Tub, Soft Scrub, and Tile Cleaner. Avoid products that state on the label that they remove tarnish and rust, and those containing hydrofluoric, hydrochloric and/or phosphoric acids and caustic agents. Avoid harsh
abrasives, coatings and/or polishes. Avoid bleach-based cleaners.
Best regards,
Tanya
Date published: 2016-10-10
Where is this product made?
Thank you for your question. We manufacture Delta faucets in our plant facilities in Greensburg, Indiana; Jackson, Tennessee; London, Ontario, CA (and Panyu, China). As a global manufacturer, we also source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured or assembled, they are built to Delta Faucet Company’s exacting specifications and are quality tested to ensure long-lasting performance. The location information on the back of the box will tell you where your specific faucet model was made.
Date published: 2024-03-28
Will this faucet fit into a sink with a 1 1/4 inch hole?
Hi, Phil52849!
Thank you for your question. The Delta 9178-AR-DST Faucet does require a minimum hole size of 1 3/8" (35 mm). Here is a link to the technical specifications sheet for further measurements for the faucet:
https://media.deltafaucet.com/SpecSheet/dsp-k-19978-sd-dst_D.pdf
Best Regards,
Rosanna
Date published: 2024-03-28
Origin is where?
Hi SCAR,
Thank you for your question! Most of our faucets are manufactured in America and this model is compliant with the Buy American Act. For more information, please click the link below.
http://www.deltafaucet.com/shopping-tools/research/buying-guides/buy-american/index.html
Thanks,
Jon
Date published: 2024-03-28
Where is the faucet made?
Thank you for your question, Ma'am or Sir! The faucet 9178-AR-DST is made in the USA.
Best Regards
Themar
Date published: 2024-03-28
people are saying water connection hoses are plastic instead of braided stainless. True?
Delta Faucet 9178-AR-DST Leland Single Handle Pull-Down Kitchen Faucet with Magnetic Docking,
Hi Bill,
Thank you for your question. Our Diamond Seal Technology (DST) faucets have PEX supply lines. These eliminate the need for additional riser hoses and provide for easier installation and fewer leak points.
For more information about our DST models, please click the link below:
http://www.deltafaucet.com/smart-solutions/diamond-seal-technology.html?filter=all
Best regards,
Jon
Date published: 2024-03-28
Hi! If mounting directly to the countertop, does the handle need to be mounted to the right as shown in all the photos?
Hi, Jerry!
Thank you for your question. We recommend installing this faucet with the handle on the right. You may install it with the handle on the front or left side, but the temperature adjustment will be opposite of the standard operation for single handle faucets. You could
compensate for this by swapping the hot and cold supply lines under the sink. However, the red/blue button on the handle will no longer indicate the correct temperature.
Best Regards, Rosanna
Date published: 2024-03-28
Hello! Is there a cartridge that needs to be changed periodically with this kitchen faucet?
Thank you for your question, Pong! A Delta cartridge may at some point need replaced if debris accumulates inside. This part would be covered under the Lifetime Limited Warranty to the original consumer purchaser however.
Best regards, Edward
Date published: 2024-04-26
I have a Leland 9178-ar-dst faucet that when using the single stream is leaks around the edge and has leaked since just after it was installed 3 1/2 years ago. Help
Hi, Thank you for contacting us.
We apologize for any inconvenience with your Delta Faucet Company product. I am also more than happy to have this opportunity to help you.
Unfortunately, I would need a little more information in order to further assist you. I would like to confirm a installation date and place of purchase. To place an order for you, we will need to have your full name, physical street address, and telephone number. We use your phone number for tracking information.
Please contact us at 1-800-345-3358. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday.
Thank you for your help with this and I look forward to hearing back from you!
Best Regards,
Bethany
Date published: 2024-03-28
We are having a problem with the handle not returning to the full off position. It didn't do this when we first installed it. Now we have to carefully wiggle it back and forth to make sure it is fully off. Is there a way to take apart the main valve?
Hello, Gayle.
Thank you for your question, and I am sorry to hear that you are experiencing a leak from your Delta faucet. We recommend to clean the bottom puck on the valve cartridge assembly and retighten the bonnet nut to stop the leak. To do this, turn the water off at your shut off valve. Remove the handle. Unscrew the bonnet nut counterclockwise. Pull the valve cartridge out and clean the bottom puck on the valve cartridge assembly. Reinstall the valve cartridge assembly and retighten the bonnet by turning clockwise, to the right. Install the handle back on and turn the water back on. Test the faucet. If the faucet still leaks, we recommend to replace both the valve cartridge assembly, RP50587, and the bonnet nut, RP51503.
Best Regards,
Rosanna
Date published: 2024-03-28
What is the difference in models
? Difference in model #19978-SSSD-DST
& model #9178-AR-DST
The 19978-SSSD-DST is sold at Home Depot and the finish is different than the 9178AR.
Date published: 2024-03-28
what is the difference between the leland model 9178 AR DST and the leland model 19978z SS DST
Hi, Pla72!
Thank you for your question. The Delta 9178-AR-DST faucet is available anywhere Delta products are sold. The 19978Z-SS-DST is only available to purchase at Home Depot. Both are exactly the same make and quality, and have the same exact features.
Best Regards,
Rosanna
Date published: 2024-03-28
I am having an issue with the faucet shutting off. I have to play with the handle until I get it to a specific spot. This just started happening after two years.
Hi, Renee!
Thank you for your question, and I am sorry to hear that you are experiencing a leak from your Delta faucet. There is a bonnet nut that is holding the cartridge down, underneath your handle. We recommend to tighten the bonnet nut to stop the leak. To do this, turn the water off at your shut off valve. Remove the handle. Tighten the bonnet by turning clockwise, to the right. Install the handle back on and turn the water back on. Test the faucet. If the faucet still leaks, we recommend to replace both the valve cartridge assembly, RP50587, and the bonnet nut, RP51503.
Best Regards,
Rosanna
Date published: 2024-03-28
Reversibility
The staff’s answer to the question of installing the Delta 9178 SS DST backwards so the handle is on the left says the logo will be facing the back. There is no logo showing on the Delta website photo of the faucet. Also, do I assume correctly that this reversibility to the Delta 9178 AR DST as well since the "AR" refers to the finish?
Hi JC, Thank you for your question!
The 9178-AR-DST ( Arctic Stainless Steel finish) has the Delta name engraved on the bottom of the spout where it swivels. The faucet can be installed with the handle facing the left hand side. Please keep in mind that will change the operation of the handle.
Best regards,
Brandis
Date published: 2024-03-28
can you move the handle to the front of the faucet?
I have this great faucet installed in a new home, but the right side handle is very awkward. Can I move it to the front of the faucet?
Hi Cat, Thank you for your question!
Yes, you can install the faucet to where the handle is facing towards the front.
Best regards, Brandis
Date published: 2024-03-28
I recently installed the Delta 9178-AR-DST. The hot water from the faucet is not working but works in the rest of the house. Is there a social feature I have to override to heat the water? Everything is connected in the right place so I am at loss...help!
Thank you for your question, Fancy sink! Please make sure the limit stop is set on your cartridge. This is a small button located on the cartridge itself and can restrict the handle movement from cold to luke-warm only. Information on adjusting this setting can be found on Step 7, Page 10 of the Maintenance and Installation manual below. Please contact us directly if you need further assistance.
https://media.deltafaucet.com/MandI/104183%20Rev%20B.pdf
Best regards, Edward
Date published: 2024-03-28
I would like to take off the faucet head because it has begun to spray - I assume build up is inside the head. I see the little piece you can push in but it doesn't want to come apart from the hose easily. Is there a trick to take the head off?
Hello Chritsy,
Thank you for your inquiry! The wand/sprayer assembly of the Delta Leland Pull-Down Kitchen 978-AR-DST faucet, an be remove by simply unscrewing it from the end of the hose assembly. This should be done by hand only.
Best regards,
Tanya
Date published: 2024-03-28
The spec indicates a min clearance of 2.5 inches from center of hole for faucet to backsplash. I only have 2 inches. Why is 2.5 inches needed since the handle goes forward and not back? Will 2 inches work?
Thank you for your question, Bridget! The minimum clearance to the back splash is typically suggested for lavatory models with lift rods or for models where the handle does reach backwards. This is still suggested for maximum comfort and ease of use with the handle; however this model can still work with only 2".
Best regards, Edward
Date published: 2024-03-28
fawcet is leaking do you have repair kit
Hi, tttt!
Thank you for your question, and I am sorry to hear that you are experiencing a leak from your Delta faucet. There is a bonnet nut that is holding the cartridge down, underneath your handle. We recommend to tighten the bonnet nut to stop the leak. To do this, turn the water off at your shut off valve. Remove the handle. Pull the cartridge out to clean the bottom puck of the cartridge. Reinstall the cartridge assembly. Tighten the bonnet by turning clockwise, to the right. Install the handle back on and turn the water back on. Test the faucet. If the faucet still leaks, we recommend to replace both the valve cartridge assembly, RP50587, and the bonnet nut, RP51503.
Best Regards,
Rosanna
Date published: 2024-03-28
I have granite countertops with two existing holes. One hole is only 1.375" dia. Is this large enough for the handle?
Hi Jerry, Thank you for your question!
Below is the link technical specification sheet for the model 978-DST which will provide the information you are looking for.
http://www.deltafaucet.com/customersupport/documentation/978-dst.html?document=ts&fromDetailArea=kitchen&documentIndex=0#flashWrapper
Best regards,
Brandis
Date published: 2024-03-28
PART LIST
PART LIST
View Product
![Image-RP40650]()
Michael Graves™
Michael Graves™ Set Screw
List Price:
$7.15
Online Price:
$5.72
Free Ground Shipping All Orders $49+
RP40650
5.00
3
View Product
![Image-RP37490]()
Delta®
Delta® Stabilization Plate
List Price:
$29.40
Online Price:
$23.52
Free Ground Shipping All Orders $49+
RP37490
3.20
5
View Product
![Image-Master-RP50813]()
Delta®
Delta® Soap / Lotion Dispenser
List Price:
$62.85
-
$97.00
Free Ground Shipping All Orders $49+
RP50813
View Product
![Image-Master-RP63195]()
Leland®
Leland® Metal Lever Handle Kit
List Price:
$73.05
-
$115.25
Free Ground Shipping All Orders $49+
RP63195
View Product
![Image-RP50815]()
Victorian®
Victorian® Aerator & Wrench - Pull-Out or Pull-Down
List Price:
$31.10
Online Price:
$24.88
Free Ground Shipping All Orders $49+
RP50815
4.56
27
View Product
![Image-RP21945]()
Delta®
Delta® Soap / Lotion Dispenser - Nut
List Price:
$8.30
Online Price:
$6.64
Free Ground Shipping All Orders $49+
RP21945
4.00
2
View Product
![Image-Master-RP51502]()
Delta®
Delta® Bonnet Cap
List Price:
$18.05
-
$49.70
Free Ground Shipping All Orders $49+
RP51502
View Product
![Image-RP63263]()
Delta®
Delta® Adapter Kit - PEX Compression (4)
List Price:
$45.35
Online Price:
$36.28
Free Ground Shipping All Orders $49+
RP63263
3.67
3
View Product
![Image-RP80977]()
Delta®
Delta® Magnet Replacement Kit
List Price:
$69.80
Online Price:
$55.84
Free Ground Shipping All Orders $49+
RP80977
3.02
54
View Product
![Image-RP47888]()
Allora®
Allora® Soap / Lotion Dispenser - Body Assembly
List Price:
$16.60
Online Price:
$13.28
Free Ground Shipping All Orders $49+
RP47888
4.06
18
View Product
![Image-RP80523]()
Delta®
Delta® Hose Weight Assembly
List Price:
$53.40
Online Price:
$42.72
Free Ground Shipping All Orders $49+
RP80523
View Product
![Image-RP60923]()
Delta®
Delta® Friction Spacers & Clip - Kitchen
List Price:
$24.35
Online Price:
$19.48
Free Ground Shipping All Orders $49+
RP60923
5.00
2
View Product
![Image-RP60924]()
Delta®
Delta® Wrench - DIAMOND™ Seal Technology Faucets
List Price:
$25.90
Online Price:
$20.72
Free Ground Shipping All Orders $49+
RP60924
5.00
2
View Product
![Image-Master-RP51480]()
Leland®
Leland® Spray Assembly - Pull-Down Kitchen
List Price:
$123.10
-
$296.00
Free Ground Shipping All Orders $49+
RP51480
View Product
![Image-RP13938]()
Delta®
Delta® O-Ring
List Price:
$8.25
Online Price:
$6.60
Free Ground Shipping All Orders $49+
RP13938
4.50
2
View Product
![Image-RP50390]()
Delta®
Delta® Quick Connect Hose & Clip - 54" - Pull-Up / Pull-Down DST Faucets
List Price:
$108.65
Online Price:
$86.92
Free Ground Shipping All Orders $49+
RP50390
3.96
27
FEATURED ACCESSORIES
View Product
![Image-Master-RP50813]()
Delta®
Delta® Soap / Lotion Dispenser
List Price:
$62.85
-
$97.00
Free Ground Shipping All Orders $49+
RP50813
View Product
![Image-Master-72055TE]()
Electronic Soap Dispenser
Electronic Soap Dispenser Transitional Soap Dispenser with Touch2O® Technology
Standard Finishes
72055TE
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.