Is there a matching sink in this coloring?
thinking of installing this faucet. Need a new sink also. Are there sinks in this color or does this look ok with a stainless steel sink?
Thank you for your inquiry! Unfortunately, we do not manufacture sinks, just the faucets only. You may want to contact a local plumbing store or contractor for more information regarding sinks.
Date published: 2017-06-17
Question about escutcheon installation instructions
The installation instructions say that, if used, the cover plate and escutcheon should be installed in place of the single hole trim ring. If I take that literally, it says that I should still use the gasket and base ring, along with the under cover plate and escutcheon. However, a test-fit of the parts indicates that the under cover plate will not lay flat on the surface of the sink mounting area if I place it on top of the gasket and base ring. I am assuming, then, that when I install the cover plate and escutcheon, I do it in place of the base ring, gasket, and trim ring. Is this correct, or am I supposed to also use the base ring and gasket along with the cover plate and escutcheon (or maybe use only the gasket with the cover plate and escutcheon)?
Thank you for your question! When using the 3-hole escutcheon will not use the single hole trim ring, base ring or gasket.
Date published: 2015-12-24
I'm reading in specs for DeLuca, Arabella, Leland and Trinsic that they do not have a adjustable flow rate. What does that mean?
I have a Delta shower faucet that's either on full blast or off. Is that how these kitchen faucets are?
Thank you for your question. The only way to control the volume flow is with the on/off handle. We do offer a couple of faucets that you can increase the flow rate temporarily by toggling a switch like the Addison. It will flow normally at 1.5 gpm at 60 psi but by toggling the switch, you can increase the flow rate to 2.0 gpm at 60 psi for higher performance.
Date published: 2013-10-22
With Addison kitchen faucet, how far many inches does faucet head pull out from the seated position?
What is the practical useable pull out distance for the integrated spray head?
Thanks for your question! The total length of the hose is 54", which allows it to extend about 22" from the end of the spout.
Date published: 2017-01-26
I understand that only the 9192T AR manufactured after Jan 2018 will have shieldspray. If I order this from Home Depot, I have no way of knowing when it was manufactured. If it doesn't have the new technology can I get a head that does and for how much?
Hello Linda R,
Thank you for your inquiry! The back or bottom of the faucet box will tell you where your specific faucet model was made and manufacturing date. As our models may be made in different locations depending on available resources, there is not a list saying where each is made. However, the RP90838AR would the ShieldSpray Wand Assembly for the Delta Addison Kitchen Pull-Down Touch2O Technology 9192T-AR-DST faucet and can be ordered separately..
Date published: 2018-03-17