Trinsic®
View Full Trinsic® Kitchen Collection

Single Handle Pull-Down Kitchen Faucet in Champagne Bronze

Model#: 9159-CZ-DST
Add to Favorites
Find local Delta® installers.
Trinsic®
View Full Trinsic® Kitchen Collection
Single Handle Pull-Down Kitchen Faucet in Champagne Bronze
Model#: 9159-CZ-DST
List Price: $1,02800
Add to Favorites
Find local Delta® installers.
PRODUCT FEATURES
Delta® MagnaTite® Docking uses a powerful integrated magnet to pull your faucet spray wand precisely into place and hold it there so it stays docked when not in use. Delta® faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. Kitchen faucets with Touch-Clean® Spray Holes allow you to easily wipe away calcium and lime build-up with the touch of a finger. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. *Industry standard is based on ASME A112.18.1 of 500,000 cycles.
  • FULL-RANGE, FLEXIBLE REACH: High-arc kitchen faucet swivels 360° with a 20-inch retractable hose for easier cleaning, filling and rinsing around the sink
  • MAGNETIC DOCKING SPRAYER: MagnaTite® Docking uses a powerful magnet to keep your pull-down kitchen faucet sprayer securely in place and prevent drooping over time
  • LEAD-FREE COMPLIANT: Not all faucets are certified to necessary safety standards. Delta goes above and beyond with product testing and quality to ensure each faucet meets plumbing safety standards, including NSF/ANSI 61 and 372
  • LASTS 2X LONGER: Patented DIAMOND Seal® Technology reduces leak points and lasts 2X as long as the industry standard for long-lasting, leak-free performance (Industry standard based on ASME A112.18.1 of 500,000 cycles)
  • LEAK-FREE SUPPLY LINES YOU CAN TRUST: Delta® PEX supply lines are tested to withstand 20% more extreme pressure for 1,000 hours without leaking—far beyond plumbing standards
  • EASY INSTALLATION OPTIONS: This kitchen sink faucet fits 1 or 3-hole configurations and includes integrated InnoFlex® PEX supply lines for faster installation; optional deck plate available separately
  • CORROSION-RESISTANT FINISH: Brilliance® finishes are engineered for durability and tested for corrosion resistance to at least 2 times industry standards
  • QUICK-CLEAN SPRAY HOLES: Touch-Clean® spray holes let you easily wipe away calcium and lime buildup with the touch of a finger
  • ADA-COMPLIANT DESIGN: ADA-compliant lever handle makes this kitchen faucet easy to adjust water temperature and volume
  • LIFETIME LIMITED WARRANTY: Designed for lasting reliability and backed by Delta Faucet Company's Lifetime Limited Warranty
Special Information
Warning Image
California Prop 65 WARNING
Technology and Special Features
ADA Compliant
Touch-Clean®
No-Lead Compliant
Brilliance® Finish
Water-Efficient
Diamond Seal® Technology
MagnaTite® Docking
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Product Support, Repair Parts & Technical Specifications
View Technical Specifications
View Maintenance & Installation Sheet
View Parts & Accessories Diagram
Register Product
Resources
Design Files
Installation Information
1 or 3-hole 8" installation
1 or 3-hole 8" installation
Connection Type :
3/8" compression fittings
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
15-11/16
Valve Type:
Euromotion DIAMOND(TM) Valve

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 4ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = 'ERROR', msg = 'Not Found.'; Unsuccessful GET. status = 'ERROR', msg = 'Not Found.';
Q&A

The magnet on this basically rusted out and broke in half. Can I just get a magnet assembly?

Asked by: Erich
Hello Customer! Thank you for your question and we are happy to help. We are sorry to hear about your experience. The RP80977 is the magnet repair kit with magnet. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie
Answered by: Customer Service
Date published: 2024-05-28

Just ordered and installed this item. However, the spout is not attached securely to the base. Is it supposed to be this way? The spout wobbles completely. 

Asked by: MC428
Hello MC777, Thank you for your question about your Delta Faucet model 9159-CZ-DST. We are happy to assist you! We have reached out to you directly. We would be more than happy to assist in getting this issue resolved. We look forward to better serving you in the future. Best Regards, Themar
Answered by: Customer Service
Date published: 2024-03-28

Hi Delta, I am quite new with plumbing but need help with matching this fixture with a P-trap with flange design. Do you know which Delta products work with P-trap Flange?

Asked by: Fania Muthia
Hi Fania Muthia, Thank you for your question about the Delta Faucet model 9159-CZ-DST. This kitchen faucet does not include a drain assembly. Our kitchen sink flanges include 72010-CZ and 72030-CZ. Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Can I buy a new head. No water pressure anymore and I’ve tried the suggested soaking in water/vinegar and didn’t help. 

Asked by: Matt
Hi Matt, Thank you for your question regarding our Delta Faucet 9159-CZ-DST. We have reached out to you directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-03-12

Height of faucet

Asked by: Becky
Hello Becky, Thank you for your question about the Delta Faucet model 9159-CZ-DST TRINSIC® Single Handle Pull-Down Kitchen Faucet. I apologize for any difficulty finding this information. We are happy to help! The faucet height is 15-11/16". Please see the specification sheet for additional measurements. https://media.deltafaucet.com/SpecSheet/DSP-K-9159-DST%20Rev%20F.pdf Please reach out directly at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

The screen in the sprayer is broken and sprays all over the place.  Is it covered under warranty?  Part number is A.112.18.1M

Asked by: Dave
Hi Dave, Thanks so much for contacting Delta Faucet Company about the 9159-AR-DST! The aerator is not available separately, the wand would need replaced. I have included a link below to the Lifetime Limited Warranty. https://www.deltafaucet.com/warranty Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Hi, What would be the gal/min @ 70 psi?

Asked by: Jacob
Hello Jacob, Thank you for contacting us, I would be happy to help you. Our Delta model 9959-BL-DST has a flow rate of a maximum of 1.8 GPM @ 60 psi. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole
Answered by: Delta7
Date published: 2024-03-28

I purchased this Delta trinsic faucet 2 years ago and it is leaking. How can the problem be fixed since it has a lifetime warranty.

Asked by: AnneO
Hello Customer! Thank you for your question and we are happy to help. We offer a lifetime limited warranty to the original owner. Please contact us directly for further assistance with warranty replacement parts. Best Regards, Carrie
Answered by: Customer Service
Date published: 2024-08-16

Can I get any of the Delta Trinsic faucets with Reverse Osmosis? to be compatible with a water filtration system like kinetico.

Asked by: Christine
Hi Christine, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Trinsic® Single Handle Pull-Down Bar / Prep Faucet In Chrome MODEL#: 9959-DST does not allow for an RO system to be used, however our beverage faucets will allow for the RO system to be used. I have included a link below to our current beverage faucet. https://www.deltafaucet.com/kitchen/specialty-faucets/beverage Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Customer Service
Date published: 2024-03-28

I’d like to purchase the bar prep version of the trinsic because if it’s lower height, but I’m afraid the depth won’t reach far enough into a regular kitchen sink. Would you recommend this faucet for use in the kitchen sink?

Asked by: Jaa957
Hi Jaa957, thank you for contacting Delta Faucet Company! Our Delta Faucet 9959-BL-DST reaches 6 1/2" from the center of the valve to the center of the spout whereas the 9159-DST reaches 9 1/2" inches from the center of the valve to the center of the spout. Our Bar/prep faucets are recommended to be used in a bar/prep type of installation. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

How to repair a loose handle? I didn't see any screw on the handle.

Asked by: Layne
Hello Layne, Thank you for your question! We are happy to help! The Delta model 9159-LS-DST has a small button that hides the set screw. Remove the small button by popping the button out. The set screw can be tightened from the handle with a 1/8" Allen wrench. Please contact us if you have any questions or need further assistance. Best Regards, Emma
Answered by: Delta7
Date published: 2024-03-28

9159-AR-DST. Where the neck and spout meet, there is play in the spout as it wobbles in any direction. I read in a question that a friction spacer is needed. I do not see this part in the list, is it also called a retainer? How do you install this? 

Asked by: Daniel

Water will not come out. Red light blinking.

Asked by: Richard
Good morning Richard, Thank you for your question! When the light on our touch faucets are blinking red, it indicates that the battery is getting low, and is unable to open the solenoid. Please contact us back for any further questions. Best Regards, Frank
Answered by: Frank
Date published: 2024-03-28

The kitchen spout assembly is loose. It seems like the retainer (part number RP60923) has too much play in it. Is there any way to tighten this? The spout assembly swivels almost too easily and can be pulled off the base handle part very easily.

Asked by: Jesse
Hi Jesse, Thank you for your question about the Delta Faucet model 9159-AR-DST. Please accept our apology for the inconvenience you are experiencing with the loose spout. We are happy to help! I recommend replacing the RP60923 retainer. Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist (800) 345-3358
Answered by: Delta
Date published: 2026-02-25

We replaced our counters a few weeks ago and since our faucet was reinstalled the hose doesn’t retract the way it used to. Is there a weight that should be attached that ensures the hose goes back after use?

Asked by: ABLA
Hello ABLA, Thank you for your question. We are happy to help. The 9159-KS-DST faucet would include the steel weight assembly RP80523. Please contact us directly and we would be happy to provide further assistance. Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

Is there a, after installation, 140° limited swivel limiter, available for installing on a 9159?

Asked by: JHogan
Hi JHogan, Thank you for your question! We apologize that the information you are searching for was not readily available. We realize that can be very frustrating and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. The Delta Faucet model 9159-ARLS-DST Trinsic® Single Handle Pull-Down Kitchen Limited Swivel In Arctic Stainless has a built-in limiter. The Delta Faucet model 9159-AR-DST Trinsic® Single Handle Pull-Down Kitchen Faucet In Arctic Stainless is unable to have a separate component installed to allow it to be limited. We apologize for any inconvenience this may cause. Please contact us back directly via email with any further questions. Best Regards, Skyler
Answered by: Customer Service
Date published: 2024-03-28

what size hole in the deck?

Asked by: DougEgee
Hi DougEgee, Thank you for contacting Delta Faucet Company! For dimension information, please refer to the link below! https://media.deltafaucet.com/SpecSheet/DSP-K-9159-DST%20Rev%20F.pdf We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-07-01

The faucet head is loose, not at the base where it meets the counter that is fine, it is about a third of the way up where it steps in the units wiggles and rocks back and forth. This is the second unit we have had as the first leaked from inside the unit

Asked by: plt123
Hello plt123, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! The loose spout on our Delta Faucet TRINSIC® Single Handle Pull-Down Kitchen Faucet MODEL#: 9159-DST is caused by the friction spacer, please see the link below to the part you will need. https://www.deltafaucet.com/parts/product/RP60923.html Thank you for being a loyal Delta customer. Please contact us back for any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

How to make the handle easier to move without resistance

Asked by: SusieQ49
Hi SusieQ49, Thank you for your question about the Delta Faucet model 9159-BL-DST. Unfortunately, the faucet does not have an adjustment for the handle tightness. To first troubleshoot an issue, I recommend securing the hose and flushing the faucet with the sprayer removed. If the issue remains the cartridge may need to be replaced. Please reach out directly for further assistance or if you have any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-06-05

Our faucet is not retracting completely, and it seems that a small plastic piece that normally nests inside the faucet has come loose. Any way to safely re-secure this? 

Asked by: Dan110
Hi Dan110, Thanks for your question regarding 9159-DST! We recommend replacing RP80977. Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

What is the difference between the 9159-CZ-DST model and the 9959 CZ-DST model?

Asked by: Tony
Hello Tony, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet TRINSIC® Trinsic® Single Handle Pull-Down Kitchen Limited Swivel In Champagne Bronze MODEL#: 9159-CZLS-DST has a spout height of 15 11/16" and the 9959-CZ-DST has a spout height of 13". Please see the technical specification sheet link below. https://media.deltafaucet.com/SpecSheet/DSP-K-9159-DST%20Rev%20F.pdf Thank you for being a loyal Delta Faucet customer. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

Do I push the handle away towards the back for hot water? I read somewhere it was reversed. I’ve never had a faucet where you pulled it towards yourself to get hot water. I’d hate to get burned or scalded. 

Asked by: Ceezee
Hello Ceezee, Thank you for your question! I am happy to help you! Our Delta 9159-AR-DST handle tilts our for on and cold, then pulls towards you for hot. Please contact us back for any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

My Trinsic Brushed Nickel faucet has developed an issue with magnetic ring that supposed to hold faucet head. It looks like the ring has been rusting from the inside. It has also swollen in size which causes other issues. Can magnetic ring be replaced?

Asked by: Alex P
Hi Alex, We’re very sorry to hear about your experience. Our team would like to help resolve this for you as quickly as possible, I have sent you and email. You can also reach out to us at 1-800-345-3358. Sincerely, Kelley Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-04-22

Is the model 9159-AR-DST (Arctic Stainless Color) made of stainless steel?

Asked by: skyforest
Hi skyforest, Thank you for your question. I am sorry this information was not readily available, and I am happy to help! Unfortunately, we do not have a complete breakdown of the materials used in model 9159-AR-DST. In general, metal parts are usually brass (hub, handle, body, tube, fittings), zinc (escutcheon, hub, handle), or stainless steel (set screw, undercover plate). Please contact us directly if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

I need an adapter to install into the pull out spray hose for foot control access. Do you have a tee adapter available?

Asked by: Jesse
Hello Jesse, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet TRINSIC® Single Handle Pull-Down Kitchen Faucet MODEL#: 9159-BL-DST is set up for standard plumbing installation, we do not have an adapter but we would recommend looking locally. Thank you for being a loyal Delta Faucet customer. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

How to remove the flow restrict or?

Asked by: Kelvin
Hello, Kelvin! Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet Trinsic® Single Handle Pull-Down Kitchen Faucet In Chrome MODEL#: 9159-DST does not have a removable flow restrictor. We recommend soaking the wand in a 50/50 solution of white vinegar and water. This spray wand also includes Touch-clean spray holes. Thank you for being a loyal Delta customer. Please feel free to call, email, or message us on social if there is anything else you need. Best Regards, Themar
Answered by: Delta
Date published: 2021-07-08

The faucet handle has suddenly gotten harder to move and is not moving as freely as it did. I have taken the handle off but do not see any dirt or anywhere that it would need to be lubricated.

Asked by: KitchenSink
Hi KitchenSink! Thank you for your question and we are happy to help. The Delta 9159-DST cartridge may need to be replaced. Please contact us directly for further assistance. Best Regards, Carrie
Answered by: Customer Service
Date published: 2024-08-19

The kitchen faucet has a slow drip from the nozzle head. Do I need a replacement cartridge? The Delta faucet number is 9159-AR-DST and it was installed in 2020.

Asked by: MT312
Hi MT312, Thank you for your question about the Delta Faucet model 9159-AR-DST. Please accept our apologies for the inconvenience you are experiencing with a drip. We are happy to help! The RP73000 or RP60114 cartridge may need to be replaced. The two cartridges have different stems and attach to the handle differently. RP60114 was used in the faucet before 08/01/2018. Flushing the faucet could help with the drip. See here for more information: https://support.deltafaucet.com/s/article/What-do-I-do-if-my-single-handle-kitchen-faucet-drips-from-the-spout-outlet-DST-model Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-07-24

When will the Trinsic Single Handle Pull-Down Kitchen Faucet in Polished Nickel Model#: 9159-PN-DST be released in Polished Nickel. Renovating kitchen and bath now, and would like to order one for kitchen asap!. Bath is already polished nickel. Thanks!

Asked by: Kate
Hi Kate, Thank you for your question about the Delta Faucet model 9159-PN-DST. This polished nickel faucet is currently expected to begin taking orders 10/13/2025 and beginning to ship 11/10/2025. Please reach out with any additional questions! Best Regards, Bryan
Answered by: Delta
Date published: 2025-09-24

On my faucet, the button to change between water streaming modes has stopped working. I can take it apart and clean the switching mechanism, but that only fixes the problem for a few washes. Is it possible to get just this replacement piece warrantied?

Asked by: Kris
Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for warranty information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Themar
Date published: 2025-03-04
  • y_2026, m_9, d_5, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_8, bvpage2n
  • co_hasquestionsanswers, tq_439
  • loc_en_US, sid_9159-CZ-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 68ms
  • questions, product
PART LIST

PART LIST

Image-RP60923

Delta®

Delta® Friction Spacers & Clip - Kitchen

List Price: $24.35
Online Price: $19.48
Free Ground Shipping All Orders $49+

RP60923

5.00 2
Image-RP37490

Delta®

Delta® Stabilization Plate

List Price: $29.40
Online Price: $23.52
Free Ground Shipping All Orders $49+

RP37490

3.20 5
Image-RP13938

Delta®

Delta® O-Ring

List Price: $8.25
Online Price: $6.60
Free Ground Shipping All Orders $49+

RP13938

4.50 2
Image-RP60911

Odin®

Odin® Clip

List Price: $18.95
Online Price: $13.96
Free Ground Shipping All Orders $49+

RP60911

2.35 17
Image-RP63265

Delta®

Delta® Adapter - Slip Joint

List Price: $58.55
Online Price: $46.84
Free Ground Shipping All Orders $49+

RP63265

Image-RP63264

Delta®

Delta® Adapter Kit - PEX Compression (10)

List Price: $92.90
Online Price: $74.32
Free Ground Shipping All Orders $49+

RP63264

Image-RP63263

Delta®

Delta® Adapter Kit - PEX Compression (4)

List Price: $45.35
Online Price: $36.28
Free Ground Shipping All Orders $49+

RP63263

3.67 3
Image-Master-RP64069

Trinsic®

Trinsic® Spray Assembly - Pull-Down

List Price: $93.95 - $152.45
Free Ground Shipping All Orders $49+

RP64069

Image-RP49835

Delta®

Delta® Mounting Nut, Washer & Screws (2)

List Price: $42.80
Online Price: $34.24
Free Ground Shipping All Orders $49+

RP49835

1.00 2
Image-RP60114 Secondary Image-RP60114

DELTA

DELTA Euro-Motion DIAMOND Valve

List Price: $78.40
Online Price: $62.72
Free Ground Shipping All Orders $49+

RP60114

4.80 10
Image-RP6092

Delta®

Delta® Nuts & Washers (2) - 500 Series

List Price: $18.70
Online Price: $14.96
Free Ground Shipping All Orders $49+

RP6092

BUNDLES FEATURING THIS PRODUCT

Only at Online Retailers
Image-Master-FVS9159-SD-DST
Only at Online Retailers

Trinsic®

Trinsic® Kitchen Faucet with Soap Bundles

List Price: $798.60 - $1,160.75
Standard Finishes

FVS9159-SD-DST

* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.