Single Handle Kitchen Faucet with Spray & Soap Dispenser in Stainless

Hello Ritchard, Thank you for your question. I have included below the Delta Bellini Kitchen 11946-SSSD-DST faucet Maintenance and Installation document link below. https://media.deltafaucet.com/MandI/X00064943_F.pdf Best regards, Tanya

Thank you for your question. Delta Faucet model # 11946-SSSD-DST has an aerator with a measurement of M21.5X1-6G which is metric and we do not manufacture an adapter for this aerator.

Hi, Nancy! Thank you for your question. The Delta 11946-SSSD-DST has a valve cartridge assembly that regulates temperature and does have a handle limit stop that can be adjusted so the handle will allow hotter water to the faucet. Here is a link to the manual for this: https://media.deltafaucet.com/MandI/64211%20Rev%20A.pdf Best Regards, Rosanna

Hello Gayle, Thank you for your inquiry! Yes, the spout assembly of the Delta Bellini Kitchen 11946-SSSD-DST faucet does swivel/swings 180°. https://media.deltafaucet.com/SpecSheet/dsp-k-11946-sd-dst_D.pdf Best regards, Tanya

Hi, yohooo! Thank you for your question. The Delta Bellini 11946-SSSD-DST faucet is only available in the Brilliance Stainless Steel finish. Best Regards, Rosanna

Hi, John! Thank you for your question. The Delta RP63137 swivel aerator will not attach directly to the Delta Bellini Kitchen 11946-SSSD-DST faucet. You will need to remove the cache aerator, which has M21.5x1-6 Male threads, that comes with the faucet and install the RP51505 cache aerator adapter. This adapter will convert the faucet threads to 55/64"-27 standard male threads and then you can install the RP63137. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP51505 Best Regards, Rosanna

Thank you for your question. Delta Faucet model # 11946-SSSD-DST flows at a 1.8 gpm at 60 psi. We do offer a couple of lower flow aerators that may not flow as hard. The RP60983 is a 1.5 gpm, the RP63886 is a 1.0, and the RP60729 is a .5 gpm.

Thank you for your question, Richard. We recommend having a minimum clearance of 2 1/2" behind the faucet. However, you may be able to install it in your sink. Note that the spout base is 13/64" wider than the model 174 and that the spout curves backward. Best regards, Jon

Hi, Thank you for contacting us. We apologize for any inconvenience with your Delta Faucet Company product. I am also more than happy to have this opportunity to help you. I have attached a link of the parts diagram for the model 11946-SSSD-DST. https://media.deltafaucet.com/PartsDiagram/DPD-K-11946-SD-DST.pdf Please contact us back if you have any questions or if you need further assistance you may call us at 1-800-345-3358. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Thank you for your cooperation. Best Regards, Bethany

Hi, Robert! Thank you for your question, and I am sorry to hear that you are experiencing a leak from your Delta faucet. We recommend to clean the bottom puck on the valve cartridge assembly and retighten the bonnet nut to stop the leak. To do this, turn the water off at your shut off valve. Remove the handle. Unscrew the bonnet nut. Pull the valve cartridge out and clean the bottom puck on the valve cartridge assembly. Reinstall the valve cartridge assembly and retighten the bonnet by turning clockwise, to the right. Install the handle back on and turn the water back on. Test the faucet. If the faucet still leaks, we recommend to replace both the valve cartridge assembly, RP50587, and the bonnet nut, RP51503. Best Regards, Rosanna

Thank you for your question, Mike! The sprayer can be cleaned with a 50/50 solution of white vinegar and water. You can soak it for 15-30 minutes and then wipe it with a soft cloth. We do not recommend using CLR as it can damage the finish. Please click the link below for more information: https://www.deltafaucet.com/design-innovation/inspiredliving/how-to-clean-a-faucet Best regards, Jon

no...it only comes in stainless...look at a pilar 4380-rb-dst and add soap dispenser rp50781rb

Thank you for your question. Delta Faucet model # 11946-SSSD-DST contains a cache or hidden aerator. To remove it for cleaning, a wrench was included in the box. If you no longer have this wrench, you can order and purchase one from your local retailer or wholesaler. The part number is Delta Faucet model # RP52217.

Hello Becky! Thank you for your inquiry! Based on the aged and picture of your aerator assembly, it appears you have the non-DST Bellini Kitchen 11946-SSSD faucet. The RP46245 (areator wrench) and RP50783 (aerator) are the correct parts from the original paperwork. https://media.deltafaucet.com/MandI/49293RevD.pdf Best regards, Tanya

Hi, Mike21. Thank you for your question. Unfortunately, we do not have a smaller mounting bracket for the 11946-SSSD-DST unit. I do apologize for this inconvenience. Best Regards, Rosanna

Thank you for your question, Shirley. Unfortunately, this faucet is not currently available in the White finish. You can find our selection of faucets available in White at the link below. We do not have a widespread option at this time, but if you have an 8" installation, a faucet with a 3-hole escutcheon plate can be used. You can also use a soap dispenser such as RP1001WH in the 4th hole. https://www.deltafaucet.com/kitchen/sink-faucets?facetFinish=white&facetFinish=stainlesswhite Best regards, Jon

Hi, Glenn! Thank you for your question. All parts, spout, handle, sprayer and soap dispenser all have a maximum deck thickness of 2.5". Unfortunately, there is not an adapter/thick deck kit that will fit this faucet. I do apologize for this inconvenience. Best Regards, Rosanna

Thank you for your question, Steve! The Technical Specifications Sheet for model 11946-SSSD-DST will include the necessary measurements for installation. https://media.deltafaucet.com/SpecSheet/dsp-k-11946-sd-dst_D.pdf Best regards, Edward

yes

Thank you for your question, Wayne! This faucet will work in a 3 o 4-hole installation on 8" to 16" center. Best regards, Jon

Thank you for your question, Priscilla! Yes, the Delta Bellini Kitchen 11946-SSSD-DST faucet comes with a warranty. All parts and finishes of this Delta® faucet are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns the home in which the faucet was first installed or, for commercial users, for five (5) years from the date of purchase. Electronic Parts and Batteries (if applicable) Electronic parts (other than batteries), if any, of this Delta® faucet are warranted to the original consumer purchaser to be free from defects in material and workmanship for five (5) years from the date of purchase or, for commercial users, for one (1) year from the date of purchase. No warranty is provided on batteries. What We Will Do Delta Faucet Company will repair or replace, free of charge, during the applicable warranty period, any part that proves defective in material and/or workmanship under normal installation, use and service. If repair or replacement is not practical, Delta Faucet Company may elect to refund the purchase price in exchange for the return of the product. These are your exclusive remedies. What Is Not Covered Any labor charges incurred by the purchaser to repair, replace, install or remove this product are not covered by this warranty. Delta Faucet Company shall not be liable for any damage to the faucet resulting from reasonable wear and tear, misuse, abuse, neglect or improper or incorrectly performed installation, maintenance or repair, including failure to follow the applicable care and cleaning instructions. Delta Faucet Company recommends using a professional plumber for all installation and repair. We also recommend that you use only genuine Delta® replacement parts. What You Must Do To Obtain Warranty Service or Replacement Parts A warranty claim may be made and replacement parts may be obtained by calling 1 800 345 DELTA (3358) or by writing to: In the United States and Mexico: Delta Faucet Company Product Service 55 E. 111th Street Indianapolis, IN 46280 Customerservice@Deltafaucet.com In Canada: Masco Canada Limited, Plumbing Group Technical Service Centre 350 South Edgeware Road St. Thomas, ON N5P 4L1 Proof of purchase (original sales receipt) from the original purchaser must be made available to Delta Faucet Company for all warranty claims unless the purchaser has registered the product with Delta Faucet Company. This warranty applies only to Delta® faucets manufactured after January 1, 1995 and installed in the United States of America, Canada and Mexico. Limitation on Duration of Implied Warranties. TO THE EXTENT PERMITTED BY LAW, ANY IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED TO THE STATUTORY PERIOD OR THE DURATION OF THIS WARRANTY, WHICHEVER IS SHORTER. Some states/provinces do not allow limitations on how long an implied warranty lasts, so this limitation may not apply to you. Limitation of Special, Incidental or Consequential Damages. DELTA FAUCET COMPANY SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING LABOR CHARGES TO REPAIR, REPLACE, INSTALL OR REMOVE THIS PRODUCT), WHETHER ARISING OUT OF BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, BREACH OF CONTRACT, TORT, OR OTHERWISE. DELTA FAUCET COMPANY SHALL NOT BE LIABLE FOR ANY DAMAGE TO THE TOILET RESULTING FROM REASONABLE WEAR AND TEAR, MISUSE, ABUSE, NEGLECT OR IMPROPER OR INCORRECTLY PERFORMED INSTALLATION, MAINTENANCE OR REPAIR, INCLUDING FAILURE TO FOLLOW THE APPLICABLE INSTALLATION, CARE AND CLEANING INSTRUCTIONS. Some states/provinces do not allow the exclusion or limitation of special, incidental or consequential damages, so these limitations and exclusions may not apply to you. Best regards, Tanya

Hi, Diane! Thank you for your question. The four pieces of the Delta 11946-SSSD-DST faucet can be arranged in any order as long as they are within an 8"-16" installation. Best Regards, Rosanna

Thank you for your question, Nancy. This mode is not available without the soap dispenser. Best regards, Jon

No, this faucet only comes in "Stainless" ...it's almost like a brushed aluminum look.

Yes it can.

Thank you for your question, McKim1341! Model 11946-SSSD-DST uses the soap dispenser RP50781. This dispenser uses the RP47888 bottle and pump repair part which is available for order at many of our dealers both locally and online. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP47888 https://www.deltafaucet.com/where-to-buy Best regards, Edward

Hi, Abuzz! Thank you for your question. The Delta 11946-SSSD-DST Faucet includes a cached aerator which has M21.5x1-6 Male threads. This can be removed with the aerator wrench that came with the faucet when first purchased. The RP51505 cache aerator adapter will then need to be installed into the spout. This adapter will convert the faucet threads to 55/64"-27 standard male threads. Best Regards, Rosanna

Hi gonzo, Thank you for your question! To uninstall this faucet, please be sure to turn off the hot and cold water supplies under the sink. disconnect the supplies by unscrewing them from the stop valves. Disconnect the sprayer hose by pulling out the blue clip and pulling down on the hose. Swivel the top blue clip away from the gray housing and then pull out the valve tube. You can than remove the mounting nuts and pull out the faucet from above. http://www.deltafaucet.com/customersupport/documentation/11946-sssd-dst.html?document=mi&documentIndex=0#flashWrapper Best regards, Jon

Hi, Maxy! Thank you for your question. The air gap that will match the Delta 11946-SSSD-DST is our 72020-SS. This is our Brilliance Stainless Steel finish. Here is a link to this part: https://www.deltafaucet.com/kitchen/product/72020-SS Best Regards, Rosanna

Hello! You can typically locate the model number from a tag on the hot supply line under the sink. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist