Classic
View Full Classic Kitchen Collection

Single Handle Kitchen Faucet with Spray in Chrome

Model#: 400-DST
Add to Favorites
Find local Delta® installers.
Classic
View Full Classic Kitchen Collection
Single Handle Kitchen Faucet with Spray in Chrome
Model#: 400-DST
List Price: $23150
Add to Favorites
Find local Delta® installers.
PRODUCT FEATURES
Delta® faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. *Industry standard is based on ASME A112.18.1 of 500,000 cycles.
  • DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
  • Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines
  • 4-hole 8" installation
  • Includes convenient side sprayer
  • ADA Compliant
  • Standard spout swivels 180degrees
Special Information
Warning Image
California Prop 65 WARNING
Technology and Special Features
ADA Compliant
ActivTouch®
No-Lead Compliant
With Side Sprayer
Water-Efficient
Diamond Seal® Technology
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Product Support, Repair Parts & Technical Specifications
View Technical Specifications
View Maintenance & Installation Sheet
View Parts & Accessories Diagram
Register Product
Installation Information
4-hole 8" installation
Connection Type :
3/8" compression fittings
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
8-3/8
Valve Type:
NA

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
Rated 4 out of 5 by from Save the Diverter Plug! I bought this kitchen faucet in 2013--thirteen years ago--and it performed well until two days ago, when I felt water on my foot while using the sprayer. The sprayer hose cracked in a few places near the diverter valve where the hose bends the most when used, and it did an impressive job of spraying everything in the cabinet below the sink when it finally let go. There was enough water coming out of the split hose that it ran out of the cabinet and onto my foot to let me know it failed. I called Delta, and they are sending me a new diverter/sprayer hose for free since the failure falls under their lifetime warranty. I probably use the sprayer an average of a few times a week, to give you some perspective on the longevity of the hose. From what I've seen in other reviews of this faucet, the diverter/sprayer hose is a common point of failure. The important take-home that prompted me to write this review is that the faucet comes with a "diverter plug" installed in the fitting for the diverter/sprayer hose, so there is the option of using the faucet either with or without the sprayer hose. The installation instructions I received told me to discard the diverter plug if I was installing the sprayer hose. Don't discard the diverter plug! Saving the diverter plug and installing it after the diverter/sprayer hose failed allowed me to continue using the faucet without the sprayer. It made the difference between having no running water in the kitchen while I wait for the parts from Delta to arrive, and having running water in the kitchen. Do I wish the sprayer hose had lasted longer than 13 years? Of course, but since the diverter plug saves me from going without water in the kitchen while I wait for the free replacement from Delta, I'm okay with it.
Date published: 2026-07-11
Rated 3 out of 5 by from Not was it once was. Have used this faucet for decades but the recent one purchased on12-30-25 has been a disappointment. The sprayer will not cut off half the time. Luckily I had not thrown away the old ragged looking one and I'm currently using it. Apparently the sprayer relies on water pressure to help shut it off. If any water is being used anywhere in the house the sprayer will not shut off properly!
Date published: 2026-06-12
Rated 2 out of 5 by from Terrible sprayer The side sprayer needs a total re-design. Already have had to replace and still does not work properly and leaks.
Date published: 2026-06-02
Rated 3 out of 5 by from Average Faucet drips after turned off. Especially if you don’t put the handle in the right spot.
Date published: 2026-05-08
Rated 5 out of 5 by from Looking good! Easy to install ( it took fore time taking out the old one ) and operate; a little less flow, but that I believe is the new standard. I even looks better than the old Danze thing that I was about to repair for the fourth time in 3 years. Using a pex style install was new to me as well, but it's easier than copper.
Date published: 2025-10-02
Rated 2 out of 5 by from The sprayer is junk Have not had this faucet 10 months and the sprayer sticks on you will get a shower if you check the sprayer
Date published: 2025-03-17
Rated 4 out of 5 by from Solid and functional This is a great faucet, tight design and feel. Not fabulous, but it doesn’t need to be. It’s a workhorse.
Date published: 2024-04-23
Rated 5 out of 5 by from So far still working Had about a week now so far it working just hope it holds up
Date published: 2023-02-21
  • y_2026, m_7, d_27, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_152
  • loc_en_US, sid_400-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 240ms
  • reviews, product
Q&A

I need a new washer it is an interlocking 3 lobed washer for my 400-DST

Asked by: Clint

can this faucet be installed with 2 holes, 1 for faucet and 1 for sprayer

Asked by: The Plumber
Hello Valued Customer, Thank you for contacting Delta Faucet Company! No, our 400-DST requires 4-holes. Our 441-DST requires only two holes however, it does not have an escutcheon plate. https://www.deltafaucet.com/kitchen/product/441-DST.html We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Delta
Date published: 2025-02-24

I have Kitchen faucet Model 400-DST. it is dripping and need replacement part RP50587. Is this part on warranty and if so, how do I get it?

Asked by: Dan44
Hi Dan44, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. We will need more information to better assist you. Please watch out for an email from customerservice@deltafaucet.com. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

I need the clip that holds side spray hose in place under sink

Asked by: Vince
Hi Vince, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Classic Single Handle Kitchen Faucet With Spray In Chrome MODEL#: 400-DST uses a diverter clip RP53997, please see the parts diagram link below. https://media.deltafaucet.com/PartsDiagram/DPD-K-100-DST_A.pdf Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Customer Service
Date published: 2024-03-28

Can the spout on my Delta 400 DST be removed from the escution base and be lubricated? It has become difficult to swivel. Thank you

Asked by: Leon
Hello Phil, Thank you for your question about your Delta Faucet model 400-DST. We are happy to assist you! We have reached out to you directly. We would be more than happy to assist in getting this issue resolved. We look forward to better serving you in the future. Best Regards, Themar Digital Engagement Specialist
Answered by: Customer Service
Date published: 2024-03-28

is the RP50587 valve cartridge covered under warranty on the Deltal 400-DST. Hot water side quit working. Only thing I can see that would affect the water flow on just Hot water side.

Asked by: Mike777
Hi Mike777, Thanks so much for contacting Delta Faucet Company! The 400-DST does take the RP50587, however low flowed is caused by blockage or debris, and we would recommend flushing. Please see the link below to our Help Center, which includes flushing steps. https://support.deltafaucet.com/s/article/How-to-Install-a-Delta-Single-Handle-Pull-Out-Kitchen-Faucet-1628025862612 Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

WHERE DO I BY NEW spray attachment FOR 400-DST FAUCET

Asked by: MAHDI
Hello Customer! Thank you for your question and we are happy to help. The Delta RP60097 is available on our website or by searching the "Where to Buy" option on our website. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie
Answered by: Carrie
Date published: 2025-06-23

I have a 400-DST sprayer and can not find a hose relacement to fit the plastic plug in fitting under the sink--found adapters but nothing to fit this unit--the fitting that connects to the sprayer handel pops off when water is turned on--.

Asked by: Butch
Hello Butch, Thank you for your question! I am sorry that the information you are inquiring about the Delta Faucet Single Handle Kitchen Faucet With Spray, model 400-DST, is not readily available; however, I am happy to help you. The correct part number for the Sprayer and Hose Assembly for model 400-DST is RP60097. RP60097: https://www.deltafaucet.com/parts/product/RP60097.html We recommend flushing your unit. Parts Diagram: 400-DST https://media.deltafaucet.com/PartsDiagram/DPD-K-100-DST_A.pdf Flushing your Single Handle DST Kitchen Faucet What you need before you begin: 1/8”-Allen wrench Bucket Strap wrench Second pair of hands Towel Before beginning, please turn off the faucet at the shut-off valve, and cover the drain for your sink. To begin, you will need to remove the set screw on the handle with the Allen wrench. When the set screw is removed, you can remove the handle, sleeve assembly, bonnet, and valve assembly. Please note that some people may need to use a strap wrench to loosen and or remove the bonnet; that is okay. With the valve of the faucet empty, go ahead and place the towel behind the back of the faucet; then put the bucket over the top of the towel, allowing the bucket to sit over the faucet; where the handle would be. Turn the cold-water valve on, allowing the water to run up in the bucket and down into the sink. Allow the water to run for at least 60 seconds for the best results. Once the time is up, go ahead and turn the cold-water valve off. Turn on the hot water valve and do the process once more. Please wipe off the puck (which is where the valve assembly sits inside of the faucet) with a soft cloth before putting it in your valve assembly. Flushing the supply lines at the shut-off valves What you need before you begin: Bucket Towel Please shut off the valve for the cold-water line. Next, disconnect the cold-water line from the shut-off valve and place it into the bucket. Place the handle in the on-position and at what would be considered lukewarm temperature. Next, turn on the cold-water valve and allow the supply line to bleed for at least 60 seconds. When the time is up, turn the valve back off and attach the supply line back like it was before. Now you can move onto the hot water line. Go ahead and shut off the valve. Remove the hot water supply line from the valve and place it into the bucket. The handle to the faucet should still be in the lukewarm, on-position as before. Next, turn on the hot water valve and allow the supply line to bleed for at least 60 seconds. When the time is up, turn the valve back off and attach the supply line back as it was before. Thank you for being a loyal Delta Faucet customer. Best Regards, Emma
Answered by: Delta7
Date published: 2024-03-28

What replacement cartridge does this model take?

Asked by: Tripp
Hello Tripp, Thank you for your question! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. The Delta Faucet Classic Single Handle Kitchen Faucet With Spray, model 400-DST, uses the Delta Faucet Valve Assembly, model RP50587, for some needed repairs. Parts Diagram: https://media.deltafaucet.com/PartsDiagram/DPD-K-100-DST_A.pdf Please feel free to contact us with any questions or for further assistance. Thank you for being a loyal Delta Faucet customer! Best Regards, Emma Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

what are specifications for a replacement water supply hose

Asked by: Marty
Hi Marty, Thank you for your question about the Delta Faucet model 400-DST. The integrated supply lines are 3/8" O.D. straight, staggered pex supply tubes. 35" (889 mm) and 36" (914 mm) long. The supply lines are not removable and are not designed to be replaced. Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Is this faucet made in America?

Asked by: Pete
Hi Peter, thank you for your interest in the 400-DST! As a global manufacturer, we source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured, or assembled, they are built to Delta Faucet Company's exacting specifications and are quality tested to ensure long-lasting performance. The location information on the back of the box will tell you where your specific faucet model was made. Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

The connection of the sprayer hose to the linkage under the sink leaks. How do i fix it, what are the parts

Asked by: BobSlayton
Hi Bob, Thank you for your question about the Delta Faucet model 400-DST. The o-rings on the hose connection may be the cause of a leak. RP60097 is the sprayer and hose assembly with o-rings. Two O-Rings Are The Same Size Which Goes Onto The Faucet Nipple And That Size Is USN 014 And The Third O-Ring That Goes Onto The Diverter At The End Of The Hose Has A Size Of USN 012. Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Delta
Date published: 2025-06-16

Hi! I just need the faucet attachment at the end where the water comes out. Where do I buy just this? Model 400-DSR

Asked by: Maxe
Hi Maxe, Thanks so much for contacting Delta Faucet Company! The CLASSIC Kitchen Faucet MODEL#: 400-DST uses the Aerator MODEL#: RP19754. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-03-20

My sprayer is not working. Is the diverter value in the spray assembly or the spout base? Can it be replaced separately or does the entire spray assembly have to be replaced?

Asked by: Paul
Hi Paul! Thank you for your question! The diverter is actually located in the very bottom of the hose assembly and pressure engages it upon squeezing the button of the veggie sprayer. Best Regards, Tim
Answered by: Delta
Date published: 2024-03-28

I have a Delta 400-DST single handle kitchen faucet that is dripping from the spout. Is it covered under the lifetime warranty? Thank you so much for your time.

Asked by: Dave
Hello Dave! Thank you for your question and we are happy to help. We offer a lifetime limited warranty to the original owner. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie
Answered by: Digital Specialist
Date published: 2026-06-08

Need a repair kit

Asked by: Phil
Hi Phil, Thank you for your question about the Delta Faucet model 400-DST. For a drip or small leak, we recommend flushing the faucet and replacing the RP50587 cartridge if the issue remains. See here for more information: https://support.deltafaucet.com/s/article/What-do-I-do-if-my-single-handle-kitchen-faucet-drips-from-the-spout-outlet-DST-model Please contact us directly for additional assistance or if you have any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

My kitchen sink faucet with side sprayer,model #400 DST.Which sprayer used to replace the old one?

Asked by: Chuc Dinh
Hi Chuc Dinh, Thank you for your question about the Delta Faucet model 400-DST Classic Single Handle Kitchen Faucet With Spray In Chrome. Please accept our sincere apology for the inconvenience you are experiencing. We are happy to help. The replacement sprayer for this faucet model is RP60097. https://www.deltafaucet.com/parts/product/RP60097.html Please reach out if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Does this faucet come with a reinforcement bar?

Asked by: Notman
Hello Notman! Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. The Delta Classic Single Handle Kitchen Faucet With Spray In Chrome MODEL#: 400-DST does not come with a reinforcement bar. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie
Answered by: Delta7
Date published: 2024-03-28

Can this be installed as single hole with out the deck plate?

Asked by: Fred
Hi Fred, Thanks so much for contacting Delta Faucet Company! The CLASSIC Kitchen Faucet With Spray MODEL#: 400-DST escutcheon cannot be removed. However, the CLASSIC Kitchen Faucet With Spray MODEL#: 175-DST is very similar to this unit and does not have a escutcheon. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-01-31

I need a new aerator for a 4oo DST kitchen faucet where can I get one?

Asked by: Keith
Hi Keith, Thank you for your question about the Delta Faucet model 400-DST. A replacement aerator is available as part number RP70719. https://www.deltafaucet.com/parts/product/RP70719.html Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-10-08

What cartridge does the 400DST take?

Asked by: Serb
Hi Serb, Thank you for your question regarding our Delta Faucet 400-DST. The cartridge is RP50587. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-03-21

I have a 400-dst-l, with spray. When I turn it on, I get a water hammer shock. Happens with either hot or cold. And only when faucet not used for 30 mins or more. Suggestions?

Asked by: JemB
Hello Customer! Thank you for your question and we are happy to help. The diverter or the sprayer may need to be replaced. Please contact us directly by giving us a phone call or sending us an email for further assistance. Best Regards, Carrie
Answered by: Carrie
Date published: 2025-01-14

My 400dst faucet makes a loud creaking sound which I think is the cartridge. Where can I find a video for installing a new cartridge?

Asked by: bob54
Hi bob54, Thank you for your question about the Delta Faucet model 400-DST CLASSIC Single Handle Kitchen Faucet With Spray In Chrome. I am sorry this information was not readily available, and I am happy to help! Instructions to replace the cartridge should be included with the repair part or we have additional instructions available here: https://support.deltafaucet.com/s/article/What-do-I-do-if-my-single-handle-kitchen-faucet-drips-from-the-spout-outlet-DST-model Unfortunately, we do not currently have a video of replacing this cartridge. Please contact us directly if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

to may it concern, I'm having trouble trying to remove the bonnet nut on my single handle kitchen faucet model 400-DST assistance please

Asked by: Dave
Hi Dave, Please accept our sincere apology for the inconvenience you are experiencing with removing the bonnet nut. We are happy to help! Soaking the area with 50/50 white vinegar and water can help remove mineral deposits causing the issue. See here for more information and tips: https://support.deltafaucet.com/s/article/Bonnet-Nut-Removal Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-04-16

What would cause water to stop flowing when using the spray hose? Water stops totally, no flow from spray hose or spout (when spray trigger is released). It takes a few seconds before water starts to flow again. Will changing the cartridge correct this?

Asked by: Scotty
Hi Scotty, Thanks so much for contacting Delta Faucet Company! It is possible that a flush could resolve this issue with the CLASSIC Kitchen Faucet MODEL#: 400-DST. To flush the supply line, first shut off the hot and cold-water supply. Remove the hot supply line from the shut-off valve and place the line into a bucket. Open the handle to the fully open middle position, and then turn the cold supply back on for one minute. The cold water should flow through the faucet and out the hot supply tube. Reconnect the supply line and repeat with the second line. If this does not help, please reach out to us directly for further assistance. Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-07-18

Does the hand sprayer have to be installed with this faucet? 400-DST Model.

Asked by: Steve
Hi Steve, Thank you for your question about the Delta Faucet model 400-DST. The faucet can be used without installing the side sprayer by not removing the diverter cap. See the installation manual for more information: https://media.deltafaucet.com/MandI/111079%20Rev%20B.pdf Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-02-09

The Delta kitchen faucet model 400-DST has a side sprayer. Is the side sprayer body metal or plastic

Asked by: Lanny
Hello Lanny, Thanks so much for contacting Delta Faucet Company! The Classic Single Handle Kitchen Faucet with Spray Model#: 400-DST is a mixture of metallic and non-metallic material. Quality is very important to us and our products undergo rigorous testing to ensure high-quality performance. Non-metallic products are beneficial in that they do not rust or corrode and help prevent heat transfer. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Kelley
Date published: 2024-12-05

Is the sprayer for the Delta 400DST classic covered by the life time warranty? My sprayer is literally falling apart and won't spray anymore. I've had it for several years. Bought it at Lowe's. I really need my sprayer.

Asked by: Melray
Hi Valued Customer, Thank you for your question regarding our Delta Faucet 400-DST. We have reached out to you directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-06-17

I just asked about washers for my handle. I have model 400-DST

Asked by: Carol
Hello Carol! Thank you for your question and we are happy to help! The repair parts you will need are RP50587, RP51503, and RP51502 to repair your Delta 400-DST. With any further questions or concerns, please do not hesitate to reach out to us directly. Best Regards, Carrie
Answered by: Delta7
Date published: 2024-03-28

How do I remove the Diverter Clip RP53997 to unattach the spray hose connection (RP10345)? Will removing the Diverter Clip destroy it requiring a new Diverter Clip?

Asked by: TGDon
Hi TGDon, Thank you for your question about the Delta Faucet model 400-DST Classic Single Handle Kitchen Faucet With Spray In Chrome. I am sorry this information was not readily available, and I am happy to help! Pull diverter clip outward until loose; but, do not completely remove. Remove the diverter cap or hose nipple from the diverter. Keeping the diverter clip pulled out, insert spray hose nipple into the diverter. Make sure the hose nipple is completely inserted and then push the diverter clip in until it locks the hose nipple into place. Pull down moderately to ensure the connection has been made. See the maintenance and installation instructions for more information. https://media.deltafaucet.com/MandI/75106%20Rev%20D.pdf Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28
  • y_2026, m_7, d_27, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_3, bvpage2n
  • co_hasquestionsanswers, tq_86
  • loc_en_US, sid_400-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 287ms
  • questions, product
PART LIST

PART LIST

1 2 >
Image-Master-RP2393

Delta®

Delta® Metal Lever Handle Kit

List Price: $21.95 - $36.10
Free Ground Shipping All Orders $49+

RP2393

Image-Master-RP19754

Delta®

Delta® Aerator - Water-Efficient - 1.5 GPM

List Price: $16.50 - $27.15
Free Ground Shipping All Orders $49+

RP19754

Image-RP63265

Delta®

Delta® Adapter - Slip Joint

List Price: $58.55
Online Price: $46.84
Free Ground Shipping All Orders $49+

RP63265

Image-RP63264

Delta®

Delta® Adapter Kit - PEX Compression (10)

List Price: $92.90
Online Price: $74.32
Free Ground Shipping All Orders $49+

RP63264

Image-RP63792

Delta®

Delta® Stud Reinforcement Kit

List Price: $28.20
Online Price: $22.56
Free Ground Shipping All Orders $49+

RP63792

Image-RP28906

Delta®

Delta® Button - Red & Blue

List Price: $8.35
Online Price: $6.68
Free Ground Shipping All Orders $49+

RP28906

4.47 19
Image-Master-RP51502

Delta®

Delta® Bonnet Cap

List Price: $18.05 - $49.70
Free Ground Shipping All Orders $49+

RP51502

Image-RP21945

Delta®

Delta® Soap / Lotion Dispenser - Nut

List Price: $8.30
Online Price: $6.64
Free Ground Shipping All Orders $49+

RP21945

4.00 2
Image-RP63263

Delta®

Delta® Adapter Kit - PEX Compression (4)

List Price: $45.35
Online Price: $36.28
Free Ground Shipping All Orders $49+

RP63263

3.67 3
Image-Master-RP60097

Classic

Classic Side Spray & Hose Assembly

List Price: $77.25 - $103.85
Free Ground Shipping All Orders $49+

RP60097

Image-Master-RP60095

Delta®

Delta® Metal Lever Handle Kit

List Price: $20.75 - $56.40
Free Ground Shipping All Orders $49+

RP60095

Image-Master-RP70719

Delta®

Delta® Aerator - Water-Efficient - 1.75 GPM

List Price: $23.85 - $53.65
Free Ground Shipping All Orders $49+

RP70719

Image-Master-RP18508

Delta®

Delta® Aerator - 2.2 GPM

List Price: $16.85 - $33.15
Free Ground Shipping All Orders $49+

RP18508

Image-RP47029

Leland®

Leland® Mounting Bracket - 1H Bathroom

List Price: $18.05
Online Price: $14.44
Free Ground Shipping All Orders $49+

RP47029

5.00 2
Image-RP54233

Collins®

Collins® Set Screw

List Price: $11.10
Online Price: $8.88
Free Ground Shipping All Orders $49+

RP54233

Image-RP13938

Delta®

Delta® O-Ring

List Price: $8.25
Online Price: $6.60
Free Ground Shipping All Orders $49+

RP13938

4.50 2
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.