Single Handle Pull-Down Kitchen Faucet in Arctic Stainless

Model#: 9159-AR-DST
Single Handle Pull-Down Kitchen Faucet in Arctic Stainless
Model#: 9159-AR-DST
List Price: $87000
PRODUCT FEATURES
Delta® MagnaTite® Docking uses a powerful integrated magnet to pull your faucet spray wand precisely into place and hold it there so it stays docked when not in use. Delta® faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. Kitchen faucets with Touch-Clean® Spray Holes allow you to easily wipe away calcium and lime build-up with the touch of a finger. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. *Industry standard is based on ASME A112.18.1 of 500,000 cycles.
  • FULL-RANGE, FLEXIBLE REACH: High-arc kitchen faucet swivels 360° with a 20-inch retractable hose for easier cleaning, filling and rinsing around the sink
  • MAGNETIC DOCKING SPRAYER: MagnaTite® Docking uses a powerful magnet to keep your pull-down kitchen faucet sprayer securely in place and prevent drooping over time
  • LEAD-FREE COMPLIANT: Not all faucets are certified to necessary safety standards. Delta goes above and beyond with product testing and quality to ensure each faucet meets plumbing safety standards, including NSF/ANSI 61 and 372
  • LASTS 2X LONGER: Patented DIAMOND Seal® Technology reduces leak points and lasts 2X as long as the industry standard for long-lasting, leak-free performance (Industry standard based on ASME A112.18.1 of 500,000 cycles)
  • LEAK-FREE SUPPLY LINES YOU CAN TRUST: Delta® PEX supply lines are tested to withstand 20% more extreme pressure for 1,000 hours without leaking—far beyond plumbing standards
  • EASY INSTALLATION OPTIONS: This kitchen sink faucet fits 1 or 3-hole configurations and includes integrated InnoFlex® PEX supply lines for faster installation; optional deck plate available separately
  • QUICK-CLEAN SPRAY HOLES: Touch-Clean® spray holes let you easily wipe away calcium and lime buildup with the touch of a finger
  • ADA-COMPLIANT DESIGN: ADA-compliant lever handle makes this kitchen faucet easy to adjust water temperature and volume
  • LIFETIME LIMITED WARRANTY: Designed for lasting reliability and backed by Delta Faucet Company's Lifetime Limited Warranty
Special Information
Warning Image
California Prop 65 WARNING
Technology and Special Features
ADA Compliant
Touch-Clean®
No-Lead Compliant
Water-Efficient
Diamond Seal® Technology
MagnaTite® Docking
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Installation Information
1 or 3-hole 8" installation
1 or 3-hole 8" installation
Connection Type :
3/8" compression fittings
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
15-11/16
Valve Type:
Euromotion DIAMOND(TM) Valve

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
Rated 4 out of 5 by from Works well and beautiful finish Nice faucet. Expensive but nicer than any other brands. Looks great in space. All out faucets are Delta and have been dependable with great warranty.
Date published: 2026-09-08
Rated 1 out of 5 by from Indefensible handle design The handle falls off. Delta provided a new handle under warranty and we paid a plumber to install it. But the new handle fell off within a week. It's the worst design for a handle I have ever seen. I use a rubber band to keep the handle on the most expensive faucet I have ever purchased.
Date published: 2026-08-05
Rated 5 out of 5 by from Love our new faucet We are only in the first week of use, but so far so good. Love the handle/control. So easy to use.
Date published: 2026-07-07
Rated 5 out of 5 by from The best we’ve had! Once again, we’re glad we upgraded…this faucet is awesome!
Date published: 2026-06-15
Rated 5 out of 5 by from Perfect look and works well Good flow, good looking faucet. Very well made.!
Date published: 2026-06-12
Rated 5 out of 5 by from Beautiful faucet We have not had the contractor install it yet, but we love the look.
Date published: 2026-05-24
Rated 1 out of 5 by from Pretty but... The spray nodule did not sit flush within the faucet base. For the amount we paid for this faucet, we should not encounter these issues.
Date published: 2026-04-19
Rated 5 out of 5 by from Gorgeous Delta faucet Faucet works great, looks like high quality.
Date published: 2026-03-22
  • y_2026, m_9, d_29, h_11
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_336
  • loc_en_US, sid_9159-AR-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 6ms
  • reviews, product
Q&A

Why can't I remove the screen to remove build-up of sludge from water system

this faucet continues to minimize and then just about eliminate flow. The screen area is sealed preventing cleaning. I am frustrated.
Asked by: Sandra
There is a YouTube video illustrating how to disassemble the wand and clean it. Here are the steps: 1. Use small screw driver at top of button to pop it off. 2. Remove the Phillips head set screw. 3. Slide interior assembly down slightly to expose set screw hole in small plastic "cam" piece. 4. Pop out (from bottom) the small plastic "cam" piece. 5. Slide interior assembly down to completely remove. 6. Unscrew the bottom part (about 1/2" long) of interior assembly. 7. Clean both parts of interior assembly (this will be obvious!). Reassemble the wand assembly by repeating the above steps in reverse order. Replace the button (last reassembly step) by pushing in bottom part first. If button does not work, remove and try again. This took me several tries. Here is the link to the YouTube video, which is not mine, but was very helpful: https://www.youtube.com/watch?v=p7Yx1f1r5lQ&feature=em-share_video_user
Answered by: GeorgegG
Date published: 2024-03-28

What is the part number for the head of Delta faucet 9159-DST

Asked by: Mario
Hello! The part number for the wand is RP64069. https://www.deltafaucet.com/parts/product/RP64069.html Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Timothy
Date published: 2025-10-17

What is this faucet made out of?  I've heard that the brass faucets are the best.

Asked by: Ellen
Hello Ellen, Thank you for your question! The spout, body, and handle are metal. The valve consists of a Diamond Seal Technology (DST) cartridge with a brass bonnet nut. The supply lines are PEX tubing. For more information about DST, please click the link below. https://www.deltafaucet.com/design-innovation/innovations/kitchen/diamond-seal-technology Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

Which escutcheon goes with this Delta Trinsic single handle kitchen faucet to convert a three-hole sink to one hole?

Asked by: David
Thank you for your question, David! The escutcheon plate for 3-hole, 8" installations is part number RP64070. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP64070 Best regards, Jon
Answered by: Delta Faucet
Date published: 2024-03-28

How to clean the sprayer

Asked by: Joe sal
Thank you for your question, Joe sal! Typically, we recommend using a 50/50 solution of white vinegar and water applied to a rag. This spray wand also includes Touch-clean spray holes. https://www.deltafaucet.com/design-innovation/innovations/kitchen/touchclean-spray-holes Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Which soup dispenser matches the Trinsic

In the 'more pictures' display for the Trinsic, there is a soup dispenser shown that looks great with it. Which model is shown?
Asked by: suzanne_van
Hi Suzanne, Thank you for your question! The soap dispenser shown under "More Photos" is the 72065T Touch Soap Dispenser. http://www.deltafaucet.com/kitchen/details/72065t.html Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

What are the differences between models?

What are the differences between the Trinsic model 9159-AR-DST and the Allentown model 19935-SSSD-DST sold thru Home Depot? What would I get for an extra $200?
Asked by: CharlieW
Hi CharlieQW, Thank you for your question. The main difference between the 9159-AR-DST and the 19935-SSSD-DST is in the styling of the faucet. Both faucets are pulldown spray models with magnedock, touch clean sprayheads, and our Diamand Seal Technology cartridges. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

Is there a way to increase the water flow to 2.2 gpm?

We are looking for a new kitchen faucet and like this model, but we have low water pressure at our kitchen sink and would like to NOT have the flow restricted to 1.8 gpm. Is there an easy way to do that?
Asked by: Jen
Thank you for your question. Delta Faucet model # 9159-AR-DST is set at 1.8 gpm at 60 psi. This is to follow today's water legislation. We do not offer a higher gpm aerator for this model.
Answered by: Delta1
Date published: 2024-03-28

Is there a filter that can be cleaned out in the pull down part of the faucet where it screws off?

Asked by: Tammy
Thank you for your question, Tammy! There is a screen where the spray wand connects to the hose that you can check for debris. You can also soak the complete wand in a 50/50 white vinegar and water solution to help dissolve any mineral buildup. Best regards, Jon
Answered by: Delta Faucet
Date published: 2024-03-28

Is there an adjustment inside to get hotter water?

Is there a scald valve in this faucet like a shower? I'm not getting really hot water. It gets warm but not hot.
Asked by: Bunni
Hi, Bunni! Thank you for your question. Unfortunately, there is not a limit stop to get hotter water for this faucet. Best Regards, Rosanna
Answered by: Rosanna
Date published: 2024-03-28

What colour is Artic Stainless - it is comparable to the brushed stainless?

Asked by: David
Hello Thank you for your question! Yes, it is comparable to stainless steel or brushed nickel. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Timothy
Date published: 2025-07-21

what is the difference between the Delta 9159-AR-DST and 9959-ar-dst

Asked by: Theo
Thank you for your question, Theo! Model 9159-AR-DST is a standard pull-down kitchen faucet whereas model 9959-AR-DST is the Bar Prep version and is slightly shorter. https://www.deltafaucet.com/product-comparison?modelNumber=9159-AR-DST&modelNumber=9959-AR-DST Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

How far over sink does it project?

Without using the pull-out, how far over the sink does the faucet extend? In other words, what is the distance from the hole in the counter to the stream of water? I need a faucet that will clear the edge of my sink and not be too close
Asked by: TPOD
Hi TPOD, Thank you for your question. The measurement from the faucet center(center of hole) to the center of the water stream is 9-1/2". Here is a link to the model 9159-AR-DST spec sheet with this information. http://www.deltafaucet.com/customersupport/documentation/9159-ar-dst.html?document=ts&fromDetailArea=kitchen&documentIndex=0#flashWrapper Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

Flow rate

I had this faucet installed in a kitchen remodel. It's beautiful and looks great in my kitchen. It works great in "spray" mode, but in the "regular" flow seems very slow/weak to me. Could something be wrong with the faucet, or the installation? I read in one of the customer reviews that the flow seems to be somewhat of a "low flow". I'm just wondering if this is intended, or if we did something wrong. Thanks!
Asked by: Laura
The wand assembly probably needs to be taken apart and cleaned. There is a YouTube video illustrating this. Here are the steps: 1. Use small screw driver at top of button to pop it off. 2. Remove the Phillips head set screw. 3. Slide interior assembly down slightly to expose set screw hole in small plastic "cam" piece. 4. Pop out (from bottom) the small plastic "cam" piece. 5. Slide interior assembly down to completely remove. 6. Unscrew the bottom part (about 1/2" long) of interior assembly. 7. Clean both parts of interior assembly (this will be obvious!). Reassemble the wand assembly by repeating the above steps in reverse order. Replace the button (last reassembly step) by pushing in bottom part first. If button does not work, remove and try again. This took me several tries. Here is the link to the YouTube video, which is not mine, but was very helpful: https://www.youtube.com/watch?v=p7Yx1f1r5lQ&feature=em-share_video_user
Answered by: GeorgegG
Date published: 2024-03-28

What type of cleaner do you recommend for the Artic Stainless finish?

Asked by: Karen
Hi Karen, Thank you for your question! Here is the cleaning and care information for our Delta products below: Always blot dry any water from faucet surface. Allowing water to evaporate on the surface can lead to build up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean soft cloth should help keep your product looking beautiful. To remove water spots, use warm water and a soft, damp cloth. Hard water stains may be removed using a 50/50 solution of white vinegar and water. Make certain that you rinse thoroughly with water afterward. If additional cleaning is required, all of our finishes may be cleaned with the following household cleaners: Formula 409® Antibacterial All Purpose Cleaner, Fantastik® All Purpose Cleaner, or Windex® Original Glass Cleaner, when used according to the manufacturers' instructions for use. Avoid using the following which can damage your finish: Avoid industrial cleaners and abrasive cleaners, such as those used for toilet bowls, green Scotch-Brite heavy duty scrub sponges, Scrubbing Bubbles Bathroom Cleaner and Lysol Basin Tub, Soft Scrub, and Tile Cleaner. Avoid products that state on the label that they remove tarnish and rust, and those containing hydrofluoric, hydrochloric and/or phosphoric acids and caustic agents. Avoid harsh abrasives or polishes Avoid bleach-based cleaners Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2024-03-28

What are the insides made of? Plastic or Brass?

Can you tell me what the inside of this faucet is made of? Plastic or Brass or something else?
Asked by: Julie
Hi Julie, Thank you for your question! The spout, body, and handle are metal. The valve consists of a Diamond Seal Technology (DST) cartridge with a brass bonnet nut. The supply lines are PEX tubing. For more information about DST, please click the link below. https://www.deltafaucet.com/design-innovation/innovations/kitchen/diamond-seal-technology Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-02-14

How do I clean the aerator screen on a 9159-AR-DS

Asked by: Dave
Thank you for your question, Dave! The Delta model 9159-AR-DST does not have a removable aerator. Typically, we recommend using a 50/50 solution of white vinegar and water applied to a rag. This spray wand also includes Touch-clean spray holes. https://www.deltafaucet.com/design-innovation/innovations/kitchen/touchclean-spray-holes Best regards, Antoine
Answered by: DeltaFaucet7
Date published: 2024-10-29

Is there a design compatible cold water dispenser faucet?

Asked by: Miye
Dear Miye, Thank you for your question. Delta makes Traditional and Transitional style Beverage faucets. The closest matching one is the Delta Transitional Beverage model 1977-AR-DST. https://www.deltafaucet.com/kitchen/product/1977-DST Best regards, Tanya
Answered by: Tanya
Date published: 2016-10-19

Ive decided on this faucet but wonder what the difference is between the colours. I am torn between arctic stainless, chrome or stainless black. I have a grey granite sink. Is arctic stainless matte and chrome shiny?Is black a charcoal grey ? 

Asked by: Sharon
Thank you for your review, Sharon! The Chrome finish will always be reflective or mirror-like. The Arctic Stainless Steel finish is a brushed finish with a cooler blue tone than our typical Stainless Steel. Black Stainless is also less reflective but darker than Stainless or Arctic Stainless. https://www.deltafaucet.com/product-comparison?modelNumber=9159-KS-DST&modelNumber=9159-DST&modelNumber=9159-AR-DST Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Available in regular stainless steel?

Is there anyway to get this product in regular stainless? It seems sort of nuts that the most popular option is not available. Thanks, -Ben
Asked by: Ben
Thank you for your question. Delta Faucet model # 9159-AR-DST is not available in Stainless Steel. The Artic Stainless finish was designed to replace stainless steel in the kitchen and it more closely resembles the stainless steel finish of appliances out in the market today. It has a bluish tint to it and the stainles steel is more gold tinted. The Stainless Steel finish will remain in the bath faucets to match accessories there.
Answered by: Delta
Date published: 2024-03-28

How do you remove the sprayer/nozzle to clean?

I'd like to check the inside of the sprayer/nozzle if there is any build-up or debris. The flow from it has seemed very slow/low lately. The button on the sprayer is also very tough to press.
Asked by: fcradit
Dear Fcradit, Thank you for your question! If debris is trapped in the wand assembly, please remove the wand from the hose and try lightly tapping it upside-down on the counter. You may also try soaking it in a 50/50 white vinegar and water solution for about 15 minutes to help remove minerals. Best regards, Tanya
Answered by: Tanya
Date published: 2017-06-12

How do you tighten the handle?

Asked by: Jim
Thank you for your question, Jim. You can do this by removing the button cover on the bottom of the handle, then tightening the set screw with an 1/8" Allen wrench. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2018-10-07

Is this available in a Brilliance (PVD) finish?

Asked by: Tim
Dear Tim, Thank you for your question. Yes, the Trinsic Pull-Down Kitchen 9159-CZ-DST faucet comes in the Brilliance Champagne Bronze. https://www.deltafaucet.com/kitchen/product/9159-CZ-DST https://www.deltafaucet.com/design-innovation/innovations/kitchen/brilliance-finishes Best regards, Tanya
Answered by: Tanya
Date published: 2017-07-11

Renovating my kitchen and am interested in this Trinsic faucet. Does the water flow from the aerator at an angle (if so what angle)or straight down?

Also, may be better off with the Bar/Prep model (#9959 AR) which seems to have the same spout height despite the decreased overall height. What is the angle of water from that spout? Any other differences between the two models?
Asked by: Cookie
Thank you for your interest in Delta Faucet Trinsic. The Bar/Prep model #9959-AR-DST has a spout total height of 13" . The Kitchen model #9159-AR-DST has a spout total height of 15 3/4". Attached is a video specifically created for the Trinsic series! http://www.deltafaucet.com/shopping-tools/research/video-gallery/video.html?v=4yfAL2DJQLk&cat=
Answered by: Delta
Date published: 2024-03-28

Is this faucet made with a handle on the left?

Asked by: Kathy
Hi Kathy, Thank you for your question. When installed, the handle will be on the right side of the faucet. Best Regards, Courtney
Answered by: DeltaFaucet12
Date published: 2024-03-28

Which country is trinsic faucet with OUT h20 technology made? And does one have to hold on to the button for the sprayer to stay on.?

Asked by: PawPawGardner
We manufacture Delta faucets in our plant facilities in Greensburg, Indiana; Jackson, Tennessee; London, Ontario, CA (and Panyu, China). As a global manufacturer, we also source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured or assembled, they are built to Delta Faucet Company’s exacting specifications and are quality tested to ensure long-lasting performance. The location information on the back of the box will tell you where your specific faucet model was made. Delta Faucet model 9159-AR-DST does not have to have the button held down for the sprayer to stay on.
Answered by: Delta
Date published: 2024-03-28

What's the difference between this product and the one sold in Lowes as Trask 19933-SD-DST? There's a difference of over $100 (list price) .......

What's the difference between this product and the one sold in Lowes as Trask 19933-SD-DST? There's a difference of over $100 (list price) and the one from Lowes comes with a soap dispenser and is slightly taller.
Asked by: Mitch
In addition to what you've already mentioned, I noticed that the valve names are different: The Trinsic uses the Diamond Seal Valve; the Trask uses the Euromotion Diamond Valve. Also, the handle styling is slightly different between the two (the Trinsic is skinnier.)
Answered by: SammyM
Date published: 2024-03-28

What type of metal is the body of the faucet made from?

Asked by: akravenka
Hello Akravenka, Thank you for your question! The Delta Trinsic Pull-Down kitchen 9159-AR-DST has a solid brass fabricated body. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

Someone responded that the sprayer is plastic. Are they saying that the pull out section (like the last 2 inches on the faucet) is plastic or do they mean the inside assembly of the sprayer is plastic. Also, is the water aerated?

Asked by: David
Thank you for your inquiry, David! The sprayer/wand assembly of the Delta Trinsic Pull-Down Kitchen 9159-DST faucet is non metallic and it operates in an aerated or spray mode via ergonomic buttons. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

Can this item be shipped to Brooklyn NY 11237.

Asked by: wbcIII
Hi, wbcIII! Thank you for your question. The Delta 9159-BL-DST faucet may not be shipped to Brooklyn, NY 11237 as it has a flow rate of 1.80 GPM @ 60 PSI. The maximum flow rate to be within the NYC Green Code is 1.5 GPM @ 60PSI. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28
  • y_2026, m_9, d_29, h_11CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_441
  • loc_en_US, sid_9159-AR-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 83ms
  • questions, product
PART LIST

PART LIST

Image-RP60923

Delta®

Delta® Friction Spacers & Clip - Kitchen

List Price: $24.35
Online Price: $19.48
Free Ground Shipping All Orders $49+

RP60923

5.00 2
Image-RP37490

Delta®

Delta® Stabilization Plate

List Price: $29.40
Online Price: $23.52
Free Ground Shipping All Orders $49+

RP37490

3.20 5
Image-RP60911

Odin®

Odin® Clip

List Price: $18.95
Online Price: $13.96
Free Ground Shipping All Orders $49+

RP60911

2.35 17
Image-RP13938

Delta®

Delta® O-Ring

List Price: $8.25
Online Price: $6.60
Free Ground Shipping All Orders $49+

RP13938

4.50 2
Image-RP63265

Delta®

Delta® Adapter - Slip Joint

List Price: $58.55
Online Price: $46.84
Free Ground Shipping All Orders $49+

RP63265

Image-RP63264

Delta®

Delta® Adapter Kit - PEX Compression (10)

List Price: $92.90
Online Price: $74.32
Free Ground Shipping All Orders $49+

RP63264

Image-RP63263

Delta®

Delta® Adapter Kit - PEX Compression (4)

List Price: $45.35
Online Price: $36.28
Free Ground Shipping All Orders $49+

RP63263

3.67 3
Image-Master-RP64069

Trinsic®

Trinsic® Spray Assembly - Pull-Down

List Price: $93.95 - $152.45
Free Ground Shipping All Orders $49+

RP64069

Image-RP49835

Delta®

Delta® Mounting Nut, Washer & Screws (2)

List Price: $42.80
Online Price: $34.24
Free Ground Shipping All Orders $49+

RP49835

1.00 2
Image-RP60114 Secondary Image-RP60114

DELTA

DELTA Euro-Motion DIAMOND Valve

List Price: $78.40
Online Price: $62.72
Free Ground Shipping All Orders $49+

RP60114

4.80 10
Image-RP6092

Delta®

Delta® Nuts & Washers (2) - 500 Series

List Price: $18.70
Online Price: $14.96
Free Ground Shipping All Orders $49+

RP6092

BUNDLES FEATURING THIS PRODUCT

Only at Online Retailers
Image-Master-FVS9159-SD-DST
Only at Online Retailers

Trinsic®

Trinsic® Kitchen Faucet with Soap Bundles

List Price: $798.60 - $1,160.75
Standard Finishes

FVS9159-SD-DST

* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.