Single Handle Pull-Down Kitchen Faucet with Touch2O® Technology
Trinsic®
Model#: 9159T-DST
9159T-DST is rated
out of
5 by
118.
-
No-Lead Compliant
- With Touch2O Technology a simple touch anywhere on the spout or handle will start and stop the flow of water
- Helps keep your faucet cleaner, because washing the mess off your hands shouldn't involve making a mess of your faucet
- LED light signals blue when touch mode is active and flash red when batteries are running low
- Automatic water flow shut-off after four minutes helps conserve water
- Integrated TempSense™ LED light shows water temperature, changing from blue to magenta to red as temperature increases
- Battery operated 6 AA ( included) for up to 2 year battery life or 6 C (not included) for up to 5 year battery life
- Intuitive Touch2O® Technology can sense the difference between a touch and a grab, reducing the chances of false activation
- Optional A/C adapter EP73954 may be ordered separately
- MagnaTite Docking uses a powerful integrated magnet to snap your faucet spray wand precisely into place and hold it there so it stays docked when not in use and doesn't droop over time
- Soft, rubber Touch-Clean spray holes allow you to easily wipe away calcium and lime build-up with the touch of a finger
- DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
- Everything you need is together in one convenient box, including integrated InnoFlex® PEX supply lines
- 1 or 3-hole 8" installation
- ADA Compliant
- High-arc pull-down swivels 360°
- 62 in. long hose provides outstanding reach
Technology
-
Electronic Faucet
-
Touch2O Technology®
-
MagnaTite® Docking
-
DIAMOND™ Seal Technology
Special Features
-
Touch Clean
-
ADA Compliant
Installation Information
1 or 3-hole 6" or 8" installation
- Escutcheon: Optional Escutcheon Available
- Flow Rate: 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa
- Spout Height: 15-11/16"
- Spout Length: 9-1/2"
- Deck to Outlet: 8-7/16"
- Fittings Type: 3/8" compression fittings
- Deck Thickness: 2.25"
- Supply Lines: Included InnoFlex® Pex-C Supply Lines
- Valve Type: Euromotion DIAMOND™ Valve
Rated 5 out of
5
by
LGand from
Couldn’t Be Happier With My Purchase
I always wanted a faucet that you can turn on and off with a quick touch for those times when your hands are dirty from raw foods. We purchased the Touch2O Trinsic faucet in polished chrome when we remodeled our kitchen this year. I absolutely love the clean lines of this faucet and the Touch2O feature. It goes well with our contemporary style; and it feels solid and cleans up nicely. The automatic shut off is a great feature. I purchased the ac adapter so I wouldn't have to worry about changing out batteries. There are lots of expensive faucets out there but who needs them! This one works beautifully, looks great, and is a good value.
Date published: 2018-08-08
Rated 2 out of
5
by
David from
Don’t Waste Your Money on Touch20
Like many others we are experiencing faulty Touch20 problems. I am a 20 year mechanical engineer in the aerospace industry and have no problem with following their installation instructions. Our faucet worked for 9 whole months before it quit, and then one day after the replacement parts were sent. Delta make nice faucets, they just have not perfected this technology yet.
Date published: 2018-07-20
Rated 1 out of
5
by
jlreed from
Erratic and tempermental
We have the new faucet and it's quite tempermental. Not sure if I'm going to keep it or get something else that turns on when I want water. There shouldn't be a learning curve to operate a faucet!
Date published: 2018-06-20
Rated 1 out of
5
by
queisser from
Piece of junk
We've had this faucet for a few years and the touch sensor never worked, luckily it's easy to defeat it. Now the cartridge is failing but neither the cartridge part number in my manual or the new PDF from the website can be found on the delta website.
I'm done with the fancy garbage contractors recommend, from now on I'll only buy standard stuff I can get at home depot with cheap replacement parts.
Date published: 2018-06-17
Rated 5 out of
5
by
Carol from
Game-changer in the kitchen- we absolutely LOVE IT
I was surprised to see that the reviews that pop up on this page are 4 and 5 years old- they should be deleted! We've had the faucet for two weeks and we are absolutely thrilled. I used to be one of those people who wasted tons of water, and never really thought about why, but it had to to with not wanting to set the temperature and flow over and over again. With this faucet I can set the temp and flow, and turn it on and off by touch as many times as I want. No more wasting water! I LOVE the small light that changes color as the water heats up. I like using hot water when I wash dishes, and now I don't need to stand there and run my hands under the faucet over and over again, I can tell when it's hot by glancing over from the stove or the fridge. And, as strange as it may sound, I actually enjoy doing the dishes more, because of my faucet!
Date published: 2018-06-05
Rated 5 out of
5
by
None from
Easy to install-Quality
Delta is our favorite brand-couldn't wait to replace kitchen faucet with a Delta touchless. Now all the sinks, bathtub and showers all have Delta technology
Date published: 2018-04-22
Can I easily install the Trinsic 9959-dst on a plastic laundry tub that has 4" centers?
Thank you for your question, David! The Delta bar prep model 9959-dst can be installed on a laundry sink. The optional escutheon, part number RP64070 can be ordered to cover the existing holes.
Best regards, Edward
Date published: 2018-07-06
When my kitchen faucet with touch technology gets wet, it works erratic. Is there anything I can do, so this doesn’t happen?
Hi, Ricardo.
Thank you for your question. I am sorry to hear that you are experiencing erratic issues with your Delta faucet. We do recommend to wipe the faucet down after each use. Here is a list of do's and don't's for touch faucets:
Must Do or significant degradation in touch responsiveness is likely:
• Use the stabilization plate provided with the faucet (it is an insulator, which helps the faucet recognize the signal better)
• Use all other insulators provided with the faucet (exception: spout insulator cannot be used with thin-mounting surfaces)
• Make sure the metal mounting shank is at least ½” from the sink bowl or other metal objects (e.g., sink clips, metallic hoses, house wiring, etc.)
• Separate the black wire with the stereo plug as much as possible from the other wires
Should Do or some degradation in touch responsiveness is possible:
• Place battery pack as close to the floor of cabinet as possible (flat on cabinet floor for best results)
• Maintain a 2” clearance around battery pack (excluding cabinet itself)
• Route faucet wires away from all hoses and supply lines to prevent contact
• Avoid placing household objects (sponges, soaps, decorations, etc.) within 2” of faucet
Must NOT Do or significant degradation in touch responsiveness is likely:
• Modify the supplied parts (exception is stabilizer plate—it may be cut for non-standard hole spacing)
• Use power adaptor in lieu of supplied battery pack
• Bundle wires together
Should NOT Do or some degradation in touch responsiveness is possible:
• **Connect faucet or battery pack to an earth ground (e.g., house wiring or water lines)
• Install faucet on metal counter top (metal sinks are fine)
• Install faucet within 4” of a metal backsplash behind faucet
• Wrap wires around drains
If you should need further assistance, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com.
Best Regards,
Rosanna
Date published: 2018-06-29
Hello, can you tell me if it it possible to connect this faucet in Germany to German standart pipes?
Thank you for your question, Sibylle! Our Delta faucets can be installed in other countries, however they may require supply adapters. The Delta Trinsic Pull-Down Touch2O 9159T-CZ-DST faucet is designed to connect to 3/8" compression fittings. Please also note that the warranty will not apply to faucets installed in Germany.
Best regards,
Tanya
Date published: 2018-06-12
I love this faucet and I’m sture it will look great in my new kitchen. Can you please tell me what size the drill hole in the countertop needs to be?
Hello Sibylle,
Thank you for your inquiry! The Delta Trinsic Touch2O Kitchen Pull-Down 9159T-CZ-DST faucet requires a 1 1/4" to 1 1/2" (32 mm to 38 mm) hole size.
https://media.deltafaucet.com/SpecSheet/DSP-K-9159T-DST%20Rev%20E.pdf
Best regards,
Tanya
Date published: 2018-06-12
My Delta Touch faucet quit working altogether. The touch and the handle. I replaced the batteries and now the handle works, but not the touch of the neck. The model number on the Faucet is X00074950. What do I need to do to get it working?
Hello,
Thank you for your question, and I am sorry to hear that you are experiencing an issue with your Delta faucet. To better assist you with this inquiry, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com.
Best Regards,
Rosanna
Date published: 2018-05-19
I love the features & appearance, but the reviews suggest there are some issues with the technology and a few features. On the other hand, there are many 5* reviews. Is there another model you can recommend that has a more consistent performance?
Hi, Renee!
Thank you for your question. Please know that all of our products undergo rigorous tests to ensure long-lasting use and are made with high-grade materials. Here is a link to our Limited Lifetime Warranty information for our Delta faucets:
https://www.deltafaucet.com/service-parts/warranty
If there are any issues with your Delta faucet, please feel free to contact our customer service department at 1-800-345-3358 or email us at customerservice@deltafaucet.com.
Best Regards,
Rosanna
Date published: 2018-05-10
Can the on/off handle be reversed to the left side during installation
Kevin,
Thank you for your question. We recommend installing the faucet with the handle on the right. The handle operates by tilting away from the faucet to turn on. The vertical (back) position gives cold water and rotating the handle forward provides hot. Unfortunately, there is no way to reverse the movement, so if the handle is installed on the left, it will rotate backwards. Also, reversing the installation would move the LED light to the back of the faucet.
Best regards, Jon
Date published: 2018-05-07
Does this faucet meet current California flow rate requirements? And if not, is there an aerator attachment/ accessory that can be added?
Hi,
Thank you for your question. The 9159T-DST does meet the California flow rate requirements as the flow rate for the faucet is 1.20 gpm.
Best Regards,
Rosanna
Date published: 2018-04-25
