Single Handle Pull-Down Kitchen Faucet with Touch₂O® Technology in Chrome

Hello there ConsueloTheCook, Thank you for your question. The Delta Trinsic 9159T-DST Kitchen and 9959T-DST Bar/Prep faucet have the same design and touch feature. The only difference is that the Bar/Prep faucet is smaller in size than the Kitchen faucet model. https://media.deltafaucet.com/SpecSheet/DSP-K-9159T-DST%20Rev%20E.pdf Best regards, Tanya

Dear Dkeys, Thank you for question! Touching the wand assembly will not activate the touch feature. However, you can touch the handle, spout body and spout arm of the Delta Trinsic Touch Pull-Down Kitchen 9159T-DST faucet to activate the touch feature. Best regards, Tanya

Thank you for your question, David! The Delta bar prep model 9959-dst can be installed on a laundry sink. The optional escutheon, part number RP64070 can be ordered to cover the existing holes. Best regards, Edward

Hi, James! Thank you for your question. With touch activation for this faucet, you are able to leave the handle in the on position at all times. You do not need to shut off the handle when the faucet is not in use. Best Regards, Rosanna

Use the escutcheon that comes with the faucet. it covers an 8" spread.

Dear Dave, Thank you for your inquiry! The Delta Trinsic Kitchen 9159T-DST faucet requires a minimum of 2 1/2" (64 mm) clearance to the back splash. https://media.deltafaucet.com/SpecSheet/DSP-K-9159T-DST%20Rev%20E.pdf Best regards, Tanya

Hi, Shelley C! Thank you for your question. The battery life depends on the brand of battery you use. Higher quality brand batteries tend to have a longer lifespan than generic brand batteries. Best Regards, Rosanna

Thank you for your question. Delta Faucet model # 9959T-DST has a handle range of approximatley 90 degrees. It also only has a forward rotation so that it doesn't hit the backsplash.

Hi, Thank you for contacting us. We apologize for any inconvenience. We are more than happy to help you. To further assist you. We would like to gather further information. We will need to have your full name, physical street address, telephone number and date of installation. Please contact our TECH2O CONCIERGE at 1-844-923-5368 | Email: concierge@deltafaucet.com | Facebook/Twitter: @deltafaucet. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Best Regards, Bethany

Thank you for your question, Matt! The back or bottom of the box will tell you where your specific faucet model was made. As our models may be made in different locations depending on available resources, there is not a list saying where each is made. We do manufacture Delta faucets in our plant facilities in Greensburg, Indiana; Jackson, Tennessee; London, Ontario, CA and Panyu, China. No matter where in the world our products are sourced, manufactured or assembled, they are built to Delta Faucet Company’s exacting specifications and are quality tested to ensure long-lasting performance. Best regards, Edward

Thank you for your question Kelli! These are both popular finishes, however, Chrome is most commonly purchased for its versatility. Although our finishes are extremely durable, they can be damaged by harsh abrasives, chemicals or polish. To clean, we suggest simply wiping gently with a damp cloth and blotting dry with a soft towel. Best regards, Edward

Yes, and the magnetic seat keeps the head in place, every time.

Hi suan25, Thank you for your question! The faucet can be operated manually by disconnecting the battery box while the water is running. It will remain in manual mode until you reconnect the batteries. Another method is to remove the solenoid assembly and connect the hose directly to the faucet under the sink. Best regards, Jon

Hello, BenH. Thank you for your question! The light will flash red 3 times when the faucet is turned on or off if the batteries are low. We recommend installing a brand new set of non-rechargeable, Duracell or Energizer batteries. Please refer to page 16 of the Instructions for more information: https://media.deltafaucet.com/MandI/92519%20Rev%20H.pdf Best regards, Jon

Hi, Thank you for your question. The 9159T-DST does meet the California flow rate requirements as the flow rate for the faucet is 1.20 gpm. Best Regards, Rosanna

Dear Daylec, Thank you for your question. Please see the Maintenance/Installation document below, for the Delta Trinsic Touch2O Kitchen Pull-Down 9159T-DST faucet. https://media.deltafaucet.com/MandI/92519%20Rev%20G.pdf Best regards, Tanya

Hi, Donna! Thank you for your question. Ghosting from your Touch 2O Faucet can most likely be resolved by adjusting the installation below the sink. Please make sure that no wires are touching metal objects or other wires, and that the battery box is placed on the floor of the cabinet, 2 inches from the sides. Please try unplugging the black LED wire (looks like a headphone jack) and plugging it back in until it clicks. Next, reset the solenoid by removing the cap from the battery box for one minute and reconnecting it. Please also be sure to use a new set of brand name, non-rechargeable batteries. Please feel free to call, email, or message us on social. Best regards, Rosanna Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet

Hi, Newton123! Thank you for your question. The Delta 9159-DST Faucet can be operated manually without the Touch2O Function. For manual operation, first turn the handle to the 'off' position. Under the sink, make sure you have a bucket and towels ready for any excess water coming out. Remove the two blue clips on the top and bottom of the solenoid assemblies. Remove the water lines from the top and bottom of the solenoid. Remove the solenoid assembly entirely. Connect the two water lines together and secure with one of the blue clips. Turn the handle to the 'on' position to test. Best Regards, Rosanna

Hi, Jeff. Thank you for your question, and I am sorry that you are experiencing a leak from your faucet. Leaking from the faucet in the touch off mode comes from debris inside the solenoid. You may flush the solenoid by following these next steps. 1. Turn the water supply by putting your handle in the manual off position. 2. Disconnect the sprayer hose by removing the blue retaining clip. 3. Place a bucket under the male adapter coming out from the solenoid. 4. Run water into the bucket for 2-3 minutes. Debris located inside the solenoid should be flushed out after completing these steps. Best Regards, Rosanna

No you can not on this faucet.

Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist

Hi Ren, Thank you for your question! The battery box is designed to be placed on the floor of the cabinet. To replace the batteries, squeeze the tabs on the sides of the cap and pull the cap off. Install the new batteries in the direction indicated on the outside of the box, then press the cap back on until it clicks into place. It will accept 6 AA batteries using the insert or 6 C batteries. Best regards, Jon

Hi CFaivre, Thank you for your question. The auto shut off is a safety feature of our touch faucets. To turn off the auto shut-off, you would need to fully remove the solenoid assembly. Best regards, Tanya

Hi, Mike! Thank you for your question. The sprayer assembly for the Delta 9159T-DST faucet can be removed from the hose assembly to be soaked in a solution of 50% white vinegar and 50% water mix. This can be soaked for an hour or even overnight to clean any debris that may cause the flow issue. Best Regards, Rosanna

Hi Katie, Thank you for your question. Please refer to page 51 of the instructions linked below for help. To clean the screen, unscrew the wand assembly from the hose. We recommend to soak the wand in a 50/50 solution of white vinegar and water for about 15 minutes and then rinse and wipe it off to help remove mineral buildup. https://media.deltafaucet.com/QuickstartDiagram/QS-82180%20Rev%20E.pdf Best regards, Jon

Hi, Ricardo. Thank you for your question. I am sorry to hear that you are experiencing erratic issues with your Delta faucet. We do recommend to wipe the faucet down after each use. Here is a list of do's and don't's for touch faucets: Must Do or significant degradation in touch responsiveness is likely: • Use the stabilization plate provided with the faucet (it is an insulator, which helps the faucet recognize the signal better) • Use all other insulators provided with the faucet (exception: spout insulator cannot be used with thin-mounting surfaces) • Make sure the metal mounting shank is at least ½” from the sink bowl or other metal objects (e.g., sink clips, metallic hoses, house wiring, etc.) • Separate the black wire with the stereo plug as much as possible from the other wires Should Do or some degradation in touch responsiveness is possible: • Place battery pack as close to the floor of cabinet as possible (flat on cabinet floor for best results) • Maintain a 2” clearance around battery pack (excluding cabinet itself) • Route faucet wires away from all hoses and supply lines to prevent contact • Avoid placing household objects (sponges, soaps, decorations, etc.) within 2” of faucet Must NOT Do or significant degradation in touch responsiveness is likely: • Modify the supplied parts (exception is stabilizer plate—it may be cut for non-standard hole spacing) • Use power adaptor in lieu of supplied battery pack • Bundle wires together Should NOT Do or some degradation in touch responsiveness is possible: • **Connect faucet or battery pack to an earth ground (e.g., house wiring or water lines) • Install faucet on metal counter top (metal sinks are fine) • Install faucet within 4” of a metal backsplash behind faucet • Wrap wires around drains If you should need further assistance, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com. Best Regards, Rosanna

Hi Susan, Thank you for your question. The pictured soap dispenser is the 72065TE. Unfortunately, this dispenser is not currently available, and we do not have an expected date for shipping at this time. Thanks, Jon

Yes the faucet can move into three basins easily and use the hose to extend the water

Thank you for your question, Peter! The Delta Trinsic model 9159T-DST uses a 1/8" allen wrench to loosen or tighten the handle set screw. Best regards, Edward

Hi, Ella! Thank you for your question. Here is a link to the maintenance and instruction for the Delta 9159T-DST Faucet for help installing the solenoid assembly: https://media.deltafaucet.com/MandI/106559%20Rev%20C.pdf Please feel free to call, email, or message us on social. Best regards, Rosanna Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet