Trinsic®

View Full Trinsic® Kitchen Collection

Single Handle Pull-Down Bar / Prep Faucet in Champagne Bronze

Name: Single Handle Pull-Down Bar / Prep Faucet
Brand: Delta
SKU: 9959-CZ-DST
Price: 1028.00 USD
Rating: 4.2487 (193 reviews)

Model#: 9959-CZ-DST

Click to spin

Add to Favorites

Find local Delta® installers.

Trinsic®

View Full Trinsic® Kitchen Collection

Single Handle Pull-Down Bar / Prep Faucet in Champagne Bronze

Model#: 9959-CZ-DST

Champagne Bronze

Standard Finishes

List Price: $1,028⁰⁰

Add to Favorites

Find local Delta® installers.

PRODUCT FEATURES

Delta^® MagnaTite^® Docking uses a powerful integrated magnet to pull your faucet spray wand precisely into place and hold it there so it stays docked when not in use. Delta^® faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. Kitchen faucets with Touch-Clean^® Spray Holes allow you to easily wipe away calcium and lime build-up with the touch of a finger. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. *Industry standard is based on ASME A112.18.1 of 500,000 cycles.

MagnaTite Docking uses a powerful integrated magnet to snap your faucet spray wand precisely into place and hold it there so it stays docked when not in use and doesn't droop over time
Soft, rubber Touch-Clean spray holes allow you to easily wipe away calcium and lime build-up with the touch of a finger
DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines
1 or 3-hole 8" installation
ADA Compliant
High-arc pull-down swivels 360degrees
54 in. long hose provides outstanding reach

Special Information

California Prop 65 WARNING

Technology and Special Features

ADA Compliant

Volume Control

Touch-Clean^®

No-Lead Compliant

Brilliance^® Finish

Water-Efficient

Diamond Seal^® Technology

MagnaTite^® Docking

Special Information

California Prop 65 WARNING

Documents & Specs

Product Support, Repair Parts & Technical Specifications

View Technical Specifications

View Maintenance & Installation Sheet

View Parts & Accessories Diagram

Resources

Design Files

Installation Information

1 or 3-hole 6" or 8" installation

Connection Type :

3/8" compression fittings

Flow Rate :

1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa

Overall Height (in.) :

Valve Type:

Ceramic Disc

INSTALLATION SUPPORT

REVIEWS

Rated 5 out of 5 by Berniez from Fine product Very good product. Just would like to know what makes this faucet $600.00 as opposed to the Home Depot $200.00 models

Date published: 2026-03-15

Rated 5 out of 5 by cortneya16_4172 from Beautiful faucet from a name you can trust! Love this Delta Trinsic faucet! The champagne gold color is gorgeous and looks very high-end. It feels solid and sturdy, and the handle turns on and off super smoothly. The pull-down sprayer works great, and installation was easy- my husband had no trouble at all. Definitely recommend!

Date published: 2026-01-14

Rated 4 out of 5 by amy1919_6678 from Good for any kitchen Loved the tap and the color. It’s not to heavy and easy to install. Designed very well and handle is also too good. Lasts longer and loved it. Get yours soon!

Date published: 2026-01-12

Rated 5 out of 5 by vel_d_9383 from Quality you can trust! I’m currently in the process of remodeling my entire kitchen, and this faucet fits beautifully into my design plans. The quality is immediately noticeable—the faucet feels solid, substantial, and extremely well made. The finish is smooth and consistent, giving it a truly high-end, luxurious look. I’m planning on using gold fixtures throughout my kitchen, and although this finish is technically champagne bronze, it works extremely well with that aesthetic. The tone is warm and elegant and blends seamlessly with other gold elements without clashing. The pull-down feature operates smoothly and feels sturdy, and the overall height and reach will be ideal as I switch to a single-bowl sink. Delta is a brand you can trust when it comes to craftsmanship and reliability, and this faucet definitely reflects that reputation. It’s both functional and visually striking and will elevate the overall look and feel of my kitchen.

Date published: 2026-01-11

Rated 1 out of 5 by Pet org from Purchased in 7/2022, broken in 10/2025 Cheap product , looks good but didn’t last, wasn’t cheap

Date published: 2026-01-11

Rated 2 out of 5 by Mistydz from Rusted Rusted at the magnetic connector. We have had this for less than 3 years and the part that magnetically holds the hose in place has rusted and caused it to fail.

Date published: 2026-01-09

Rated 5 out of 5 by jordyns78_9323 from Beautiful and functional! This Delta Trinsic single handle pull-down kitchen faucet in champagne bronze is not only beautiful but the perfect addition to our kitchen. It was easy to install and has been working wonderfully. There are two faucet modes (aerated stream and spray) that are great for everyday use and for washing dishes. The sprayer is not the strongest spray I have seen in a faucet, but it is still powerful enough to help clean up tough spots on dirty dishes. The handle is easy to use and move and the magnet keeps it in place. We have loved this faucet and think it’s the perfect color and style for most kitchens!

Date published: 2025-12-12

Rated 5 out of 5 by heatherm686_4609 from Great Kitchen Faucet I am absolutely in love with this kitchen faucet! It goes perfect with my kitchen! It was easy to assembly and install. Water pressure is great and easy to clean! The color is amazing!

Date published: 2025-12-02

9959-CZ-DST Reviews - page 2

Q&A

Is there a filter that can be cleaned out in the pull down part of the faucet where it screws off?

Asked by: Tammy

Thank you for your question, Tammy! There is a screen where the spray wand connects to the hose that you can check for debris. You can also soak the complete wand in a 50/50 white vinegar and water solution to help dissolve any mineral buildup. Best regards, Jon

Answered by: Delta Faucet

Date published: 2024-03-28

Is there an adjustment inside to get hotter water?

Is there a scald valve in this faucet like a shower? I'm not getting really hot water. It gets warm but not hot.

Asked by: Bunni

Hi, Bunni! Thank you for your question. Unfortunately, there is not a limit stop to get hotter water for this faucet. Best Regards, Rosanna

Answered by: Rosanna

Date published: 2024-03-28

When you press the button on the pull down, does it lock in spray mode or do you have to continue to press it to keep it spraying?

Asked by: ala8c

Hi, ala8c! Thank you for your question. The spray mode on the sprayer assembly for the Delta 9159-CZ-DST is a toggle and will stay at the mode you select without having to keep pressing the desired spray mode. Best Regards, Rosanna

Answered by: Delta Faucet

Date published: 2024-03-28

Can the Trinsic Bar/Prep faucet be used with an existing reverse osmosis filtered water system?

Asked by: Bruce

Hi, We appreciate the question. It is not recommended to use the Delta 9959-AR-DST with a R/O Systems. We only recommend using our Beverage faucets with the R/O systems. Best regards, Brandis

Answered by: DeltaFaucet7

Date published: 2024-03-28

Delta 9159 vs. 9959

Is it possible to use the 9959 bar/prep sized faucet as a main kitchen faucet? Is 6.5" spout reach too short for a 30" undermount sink? Besides size/dimensions are there any differences between the 9159 and 9959 Trinsic faucets specs or features?

Asked by: marissyt

Thank you for your question. Delta Faucet models 9159-DST and 9959-DST are the same faucet with the 9959-DST just being a smaller version of the kitchen faucet. The only reason we would not recommend using the 9959-DST is it may not have the reach that you would like to all corners of the sink but that is a personal preference issue.

Answered by: Delta1

Date published: 2024-03-28

Is there a parts list? I need the clip to connect the pull out hose to the faucet

Asked by: JClark

Hello JClark, Thank you for your question. I have included the Parts Diagram for this Delta Trinsic Pull-Down Kitchen 9159-DST faucet model The Hose Clip part number is RP60911. https://media.deltafaucet.com/PartsDiagram/DPD-K-9159-DST.pdf Best regards, Tanya

Answered by: Delta Faucet

Date published: 2024-03-28

UK Adapter

Hello, I bought this model and need a UK adapter - please can you send me a link to the specific product so I know what to look for? Thank you H

Asked by: H

Hi H, Thank you for your question.Our RP63263 adapter kit should work for your needs. The 2 sets of adapters convert the 3/8" compression thread on the faucet to either 1/2" compression or 1/2" IPS thread. http://www.deltafaucet.com/repairparts/details/rp63263.html Thanks, Dave

Answered by: DeltaFaucet2

Date published: 2024-03-28

How do you remove the buttom on the handle to then tighten the screw?

The handle of my faucet is very loose. I can't seem to find something to use to pop the screw "cover" off. What do you all suggest we use to remove that cover and then get in to tighten the screw?

Asked by: Courtney

Hi Courtney, Thank you for your question. I'm sorry for any inconvenience! You can carefully remove the button cover using any tool with a point such as a nail file. Best regards, Jon

Answered by: DeltaFaucet3

Date published: 2017-06-02

For stone counter tops. What size does the opening need to be?

I'm having new stone counter tops installed in my kitchen. I'm having a company come over to take measurements. I want to let them know what size hole or opening to make on the counter to install this particular faucet, which would be a single hole application. I would be installing a farmhouse sink in the kitchen and therefore I need to install the faucet on the counter. Thank you

Asked by: John

Hi, John! Thank you for your question. The measurement for your hole size should be 1 1/4" to 1 1/2". Here is the link to our technical specifications for this faucet: https://media.deltafaucet.com/SpecSheet/DSP-K-9159-DST%20Rev%20E.pdf Best Regards, Rosanna

Answered by: Rosanna

Date published: 2017-02-03

What colour is Artic Stainless - it is comparable to the brushed stainless?

Asked by: David

Hello Thank you for your question! Yes, it is comparable to stainless steel or brushed nickel. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Answered by: Timothy

Date published: 2025-07-21

When you put the spray on does it stay on or do you need to hold the button in the entire time you are spraying?

Asked by: buggy

Thank you for your question Buggy! When you push the button to spray on the Delta 9159-CZ-DST, it stays on until you toggle the button back to the opposite mode. Best Regards, Christina

Answered by: DeltaFaucet7

Date published: 2024-03-28

Other than price, what is the difference between Trinsic & Trinsic Pro? Both have same model #.

Asked by: Deb1954

Thank you for your question, Deb1954! The Trinsic model, 9159-DST is the standard pull down kitchen faucet model. The Trinsic Pro version is actually model number 9659-DST and has a coiled spout that can be removed from the arm so that you can point the sprayer in any direction. The internal 70" pull-out hose can also be extended from the end of the coiled spout for additional reach. https://www.deltafaucet.com/product-comparison?modelNumber=9159-DST&modelNumber=9659-DST Best regards, Edward

Answered by: Delta Faucet

Date published: 2024-03-28

How long is the handle? I'm curious whether it will hit the wall behind my sink when it is pushed back.

Asked by: SAL

Hi Sal, Thank you for your question. The handle motion on the model 9959-AR-DST is out to turn the water volume on, and forward to adjust temperature. The handle does not travel back. Thanks, Dave

Answered by: DeltaFaucet2

Date published: 2024-03-28

what is the difference between the Delta 9159-AR-DST and 9959-ar-dst

Asked by: Theo

Thank you for your question, Theo! Model 9159-AR-DST is a standard pull-down kitchen faucet whereas model 9959-AR-DST is the Bar Prep version and is slightly shorter. https://www.deltafaucet.com/product-comparison?modelNumber=9159-AR-DST&modelNumber=9959-AR-DST Best regards, Edward

Answered by: Delta Faucet

Date published: 2024-03-28

spray hose composition

within 5 years, our current faucet hose deteriorated, possibly chlorine in the city water was the blame. What is the trinsic 9159-dst spray hose made of? What are the supply hoses made of? How long will they last in chlorine water? Too, how much room do I need to operate the on/off lever? How much room do I need between the lever and soap dispenser? thank you

Asked by: anna

Hi Anna, Thank you for your question. The spray hose is made of an ultracore liner. The ultracore liner was developed to be resistance to chlorine and chloramines. The supply tubes are PEX (cross linked Polyethylene) which are also designed to be chlorine and chloramine resistant. Both the hoses and the supply lines are covered under the lifetime warranty for the product. The handle needs 1-1/2" of clearance to the rear and will extend out 4-3/8" to the right of the faucet centers. If you are placing the soap dispenser to the left of the spout 4" centers would be a normal distance. If you are placing the soap dispenser to the right , 6" centers should give you enough space. I have attached a link to the spec sheet for the model 9159-DST below. Thanks, Dave http://www.deltafaucet.com/customersupport/documentation/9159-dst.html?document=ts&fromDetailArea=kitchen&documentIndex=0#flashWrapper

Answered by: DeltaFaucet2

Date published: 2024-03-28

Will faucet work with a tight backsplash

I have about 2" between the center of my hole and the backsplash of my counter. I was wondering if the faucet would still work in this tight space. For example, does the handle operate only in a pull down fashion or does it require space to push the handle back to turn on either the hot or cold water. Thanks.

Asked by: Dweezle64

The faucet works in pull down only. It is in the off position in the picture, but it moves to half way down to be on hot fully. You move the faucet handle to the right to turn it on and it only moves about an inch or less to the right to be on full force. The answer is yes, you can use this in a tight spot. The faucet does not operate back at all, all the movement in the handle is down and to the right.

Answered by: mitzi421

Date published: 2024-03-28

What is the purpose for the min 2.5" clearance

What is the purpose for the min 2.5" clearance from the center of the faucet to the backsplash? It seems it wouldn't be for the faucet handle since it moves out and forward, not backward. I have about 2" clearance and want to get this faucet but am confused if the 2" clearance would be enough for the faucet to be installed correctly and function properly.

Asked by: kyla

Dear Kyla, Thank you for your question. The Delta Trinsic Kitchen Pull-Down 9159-DST faucet has a recommended minimum 1 1/2" (38 mm) clearance to the back splash, due to the spout being able to swing 360 degrees. Best regards, Tanya

Answered by: Tanya

Date published: 2018-09-05

can you vary the water flow on this faucet by moving the handle lever. If not is there a similar model ?

Asked by: Shik

Yes, you can vary the water flow be aware that it is a lot easier to pull out open the faucet, you need the patience and small hands to open it gently.

Answered by: Iknow

Date published: 2024-03-28

What is the recommended sink depth for #9159 - DST faucet

Asked by: Anne

Dear Anne, Thank you for your question. Delta does not have any sink depth recommendations for installing the Trinsic kitchen faucet 9159-DST model or any of our other models. Best regards, Tanya

Answered by: Tanya

Date published: 2016-09-03

I bought this to complement our Delta Trinsic bathroom faucet, but it seems like the two have opposite functionally where this one moves DOWN for hot and the bathroom faucet moves UP for hot. Is this correct?

Asked by: Grant

Hi, Grant! Thank you for your question. Both Delta 9159-BL-DST and the Trinsic bathroom faucets should move out to turn on and give cold water. Pulling the handle towards you and down will give hot water. Best Regards, Rosanna

Answered by: Delta Faucet

Date published: 2024-03-28

My GC installed this faucet. When it's pulled out it just hanges there. What is wrong with it?

Asked by: JoAnna Belle

Hello JoAnna, Thank you for your question. The hose assembly of the Delta Trinsic Bar/Prep 9959-DST faucet will hang from the spout, if pulled out, until it is push back up to the magnet at the end of the spout. Our Pull-Out/Down faucet are not designed with retractable hose assemblies. Best regards, Tanya

Answered by: Delta Faucet

Date published: 2024-03-28

Do you know of a hot water dispenser that would closely match the Champagne Bronze color of this faucet?

Asked by: blopez0487

Hi, Blopez0487! Thank you for your question. We do not offer hot water dispensers. However, we do have a beverage faucet and a bar/prep faucet that will both match the Delta 9159-CZ-DST faucet. The beverage faucet that will match is our Delta 1977-CZ-DST faucet. The Bar/Prep faucet that will match is our 9959-CZ-DST faucet. Here are links to both units: https://www.deltafaucet.com/kitchen/product/1977-CZ-DST https://www.deltafaucet.com/kitchen/product/9959-CZ-DST Best Regards, Rosanna

Answered by: Delta Faucet

Date published: 2024-03-28

Can the 6-inch escutcheon RP77702 be used with the 9959-DST faucet?

Asked by: Phil

Hi, Phil! Thank you for your question. The Delta RP77702 escutcheon plate will not fit with the Delta 9959-DST faucet. The only escutcheon plate that will work for this faucet is RP64070. Best Regards, Rosanna

Answered by: Delta Faucet

Date published: 2024-03-28

How far over sink does it project?

Without using the pull-out, how far over the sink does the faucet extend? In other words, what is the distance from the hole in the counter to the stream of water? I need a faucet that will clear the edge of my sink and not be too close

Asked by: TPOD

Hi TPOD, Thank you for your question. The measurement from the faucet center(center of hole) to the center of the water stream is 9-1/2". Here is a link to the model 9159-AR-DST spec sheet with this information. http://www.deltafaucet.com/customersupport/documentation/9159-ar-dst.html?document=ts&fromDetailArea=kitchen&documentIndex=0#flashWrapper Thanks, Dave

Answered by: DeltaFaucet2

Date published: 2024-03-28

Can this product be used outside?

We have an unprotected BBQ area and we want to install this sink next to the BBQ grille. Can this product be used outside?

Asked by: ADeschamps

Hi ADeschamps, Thank you for your question. This faucet can be used in an outdoor sink. Best regards, Jon

Answered by: DeltaFaucet3

Date published: 2017-05-11

What is the pull down sprayer head and hose made out of? Is there a ball joint between the hose and the sprayer?

Asked by: Nancy

Thank you for your question, Nancy. The hose and wand assembly are non-metallic. The connection does not have a ball joint. Best regards, Jon

Answered by: DeltaFaucet3

Date published: 2016-11-23

Flow rate

I had this faucet installed in a kitchen remodel. It's beautiful and looks great in my kitchen. It works great in "spray" mode, but in the "regular" flow seems very slow/weak to me. Could something be wrong with the faucet, or the installation? I read in one of the customer reviews that the flow seems to be somewhat of a "low flow". I'm just wondering if this is intended, or if we did something wrong. Thanks!

Asked by: Laura

The wand assembly probably needs to be taken apart and cleaned. There is a YouTube video illustrating this. Here are the steps: 1. Use small screw driver at top of button to pop it off. 2. Remove the Phillips head set screw. 3. Slide interior assembly down slightly to expose set screw hole in small plastic "cam" piece. 4. Pop out (from bottom) the small plastic "cam" piece. 5. Slide interior assembly down to completely remove. 6. Unscrew the bottom part (about 1/2" long) of interior assembly. 7. Clean both parts of interior assembly (this will be obvious!). Reassemble the wand assembly by repeating the above steps in reverse order. Replace the button (last reassembly step) by pushing in bottom part first. If button does not work, remove and try again. This took me several tries. Here is the link to the YouTube video, which is not mine, but was very helpful: https://www.youtube.com/watch?v=p7Yx1f1r5lQ&feature=em-share_video_user

Answered by: GeorgegG

Date published: 2024-03-28

what excusion do i need to cover 2 other holes 1 on each side

Asked by: vernon

Thank you for your question, Vernon. The Delta Trinsic Pull-Down Kitchen faucet comes with everything needed for a single hole installation. For a three hole 8" installation, you will need the RP64070 escutcheon plate. https://media.deltafaucet.com/SpecSheet/DSP-K-9159-DST%20Rev%20E.pdf https://www.deltafaucet.com/parts-product-detail?modelNumber=RP64070 Best regards, Tanya

Answered by: Delta Faucet

Date published: 2024-03-28

What type of cleaner do you recommend for the Artic Stainless finish?

Asked by: Karen

Hi Karen, Thank you for your question! Here is the cleaning and care information for our Delta products below: Always blot dry any water from faucet surface. Allowing water to evaporate on the surface can lead to build up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean soft cloth should help keep your product looking beautiful. To remove water spots, use warm water and a soft, damp cloth. Hard water stains may be removed using a 50/50 solution of white vinegar and water. Make certain that you rinse thoroughly with water afterward. If additional cleaning is required, all of our finishes may be cleaned with the following household cleaners: Formula 409® Antibacterial All Purpose Cleaner, Fantastik® All Purpose Cleaner, or Windex® Original Glass Cleaner, when used according to the manufacturers' instructions for use. Avoid using the following which can damage your finish: Avoid industrial cleaners and abrasive cleaners, such as those used for toilet bowls, green Scotch-Brite heavy duty scrub sponges, Scrubbing Bubbles Bathroom Cleaner and Lysol Basin Tub, Soft Scrub, and Tile Cleaner. Avoid products that state on the label that they remove tarnish and rust, and those containing hydrofluoric, hydrochloric and/or phosphoric acids and caustic agents. Avoid harsh abrasives or polishes Avoid bleach-based cleaners Best regards, Brandis

Answered by: DeltaFaucet7

Date published: 2024-03-28

What does limited swivel mean exactly? 

Asked by: Marilyn 66

Hi, Marilyn66! Thank you for your question. The Limited Swivel on the Delta 9159-CZLS-DST Faucet indicates that the spout swivels only 140° instead of the whole 360° as the Delta 9159-CZ-DST Faucet swivels. Best Regards, Rosanna

Answered by: Delta Faucet

Date published: 2024-03-28

9959-CZ-DST Questions - page 5

PART LIST