Single Handle Pull-Down Bar / Prep Faucet in Champagne Bronze

Thank you for your question, Dave. The faucet comes with everything needed for a single hole installation. For a three hole 8" installation, you will need the RP64070 escutcheon plate. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP64070 Best regards, Jon

Hi YT, Thank you for your question. Unfortunately, we do not make a Beverage faucet in the Matte Black finish. Venetian Bronze is a dark brown color with bronze highlights. Best regards, Jon

Thank you for your question. The pullout hose for this model is 62" leaving approximately 18"-22" of available hose length depending on the installation. Best regards, Edward

Hi TracyC, Thank you for your question. The supply lines on the model 9159-CZ-DST have 3/8" compression fitttings. We have adapters that will convert to 1/2" compression or 1/2" pipe thread sizes. Thanks, Dave

Hi Em, Thank you for your question! The faucet can be installed with the handle towards the left side. Just keep in mind it will operate backwards compared to standard installation. Best regards, Brandis

Hi, AMR Ar! Thank you for your question. The Trinsic 9159-DST sprayer assembly does have two modes, spray and stream. The spray mode is a shower-like spray, while the stream mode is a straight stream. Here is a link to a video to show an example of this: https://media.deltafaucet.com/elvis/Video/PRODUCT_9159-DST.mp4 Best Regards, Rosanna

Once the 54" hose that it comes with is installed, how much of that hose can be extended from the faucet? If I substitute it with the 62" hose, are you saying that it will only extend 18-22" from the faucet? I am looking for a faucet that has approx. 24" extension to reach cooktop next to sink. Thank you.

Hi, Studio Outside! Thank you for your question. Unfortunately none of our kitchen sink faucets are specifically designed to be installed outdoors. They are not designed to withstand extreme cold weather conditions (freezing) or direct sunlight from the sun in the summer months. If you do decide to install one of our faucets outdoors, then please remember that our warranty only covers manufactures defects. Damage incurred to the faucet by the extreme weather conditions are not covered by our warranty program. Best Regards, Rosanna

Hi, Mark! Thank you for your question. You will want to make sure to move the handle away from the faucet to turn on the water. When the handle is out, the water should be all cold. When you move the handle closer to you, the water should get warmer until the handle is towards you, it should be at the hottest position. Best Regards, Rosanna

Hi Julie, Thank you for your question! The spout, body, and handle are metal. The valve consists of a Diamond Seal Technology (DST) cartridge with a brass bonnet nut. The supply lines are PEX tubing. For more information about DST, please click the link below. https://www.deltafaucet.com/design-innovation/innovations/kitchen/diamond-seal-technology Best regards, Jon

Hi, CH335! Thank you for your question. I am sorry to hear that you are experiencing low flow from your faucet. Over time, common water debris will settle in the house supply lines. Anytime the water is shut off to a portion of the home, this debris can become dislodged and will move through the pipes to be caught by a faucet. Local construction or the changing of the seasons can also cause this. Flushing the supply lines through the unit should remedy this situation. To flush the unit, we recommend the following: Start with the easy stuff: Remove your aerator, wand or hose to check the flow through the unit without that part installed. If the flow is good, the piece you’ve removed is where the issue is. Soaking the part in a 50/50 mixture of white vinegar and water could help remove any particles or debris blocking the flow. If the water does not have a good flow, the problem could be in the faucet. Next, check the supply lines for debris: Turn the supply off to both the hot and cold-water lines. Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water. Next, disconnect the hot water supply line and place it inside of a bucket. Once the line is securely positioned into the bucket, turn on the cold-water supply. Since the handle was left in the on position, the water will flow up the cold supply line, through the faucet cartridge and back down the hot water line into the bucket. Leave this flowing for at least 30 seconds. After flushing, reconnect the hot water line and repeat this process with the cold-water line to ensure all particles have been removed from both supplies. If you need further help with this process, please contact us directly and we can walk you through the procedure. We are available at 800-345-3358 (prompt 2, then 3), Monday through Friday, 8am to 8pm and Saturday, 9am to 6pm CST. Best Regards, Rosanna

Thank you for your question, Dave! The Delta model 9159-AR-DST does not have a removable aerator. Typically, we recommend using a 50/50 solution of white vinegar and water applied to a rag. This spray wand also includes Touch-clean spray holes. https://www.deltafaucet.com/design-innovation/innovations/kitchen/touchclean-spray-holes Best regards, Antoine

Thank you for your question. Delta Faucet model # 9959-DST can have the handle moved to the front. Keep in mind that it will make the hot and cold be side to side to operate and pull out to turn on the faucet.

Dear Marion, Thank you for your question. I have registered your Delta faucet 19933-SD-DST model for you. Also, we ask that you hold onto the warranty/installation paperwork, that came with the faucet and a copy of your original receipt or proof of purchase for any warranty claims in the future. Best regards, Tanya

Dear Miye, Thank you for your question. Delta makes Traditional and Transitional style Beverage faucets. The closest matching one is the Delta Transitional Beverage model 1977-AR-DST. https://www.deltafaucet.com/kitchen/product/1977-DST Best regards, Tanya

Hi, Dena! Thank you for your question. The Delta 9159-DST faucet is a full-size kitchen faucet while the Bar/Prep faucet is a smaller version of the 9159-DST faucet. Here is a link to the technical specifications sheet to show the different measurements: https://media.deltafaucet.com/SpecSheet/DSP-K-9159-DST%20Rev%20E.pdf Best Regards, Rosanna

Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist

Thank you for your review, Sharon! The Chrome finish will always be reflective or mirror-like. The Arctic Stainless Steel finish is a brushed finish with a cooler blue tone than our typical Stainless Steel. Black Stainless is also less reflective but darker than Stainless or Arctic Stainless. https://www.deltafaucet.com/product-comparison?modelNumber=9159-KS-DST&modelNumber=9159-DST&modelNumber=9159-AR-DST Best regards, Edward

Water flow can be very strong, in fact it is hard not to spend so much water. It is not normal to open gently, meaning first you pull out lots of water come out. It doesn't pull out that far to be a problem. I would not recommend the ergonomics of this faucet, I have it and I am stuck with it.

Thank you for your question. Delta Faucet model # 9159-AR-DST is not available in Stainless Steel. The Artic Stainless finish was designed to replace stainless steel in the kitchen and it more closely resembles the stainless steel finish of appliances out in the market today. It has a bluish tint to it and the stainles steel is more gold tinted. The Stainless Steel finish will remain in the bath faucets to match accessories there.

Hi, Steve! Thank you for your question. The Delta 9159-DST Faucet does not have a removable aerator assembly in the sprayer. We do apologize for any inconvenience this may cause. Best Regards, Rosanna

Hi, Venessa! Thank you for your question, and I am sorry to hear that this happened to your handle. The handle assembly is available. The handle kit is RP62589AR. Here is a link to the part: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP62589AR Best Regards, Rosanna

Hello DMeng, Thank you for your question. The three Delta Kitchen Pull-Out/Down faucets with a 1.5 GPM at 60 PSI are models 9192-DST, 4153-DST and 4353-DST. https://media.deltafaucet.com/SpecSheet/DSP-K-19992-SD-DST%20Rev%20B.pdf https://media.deltafaucet.com/SpecSheet/DSP-K-4153-DST%20Rev%20C.pdf https://media.deltafaucet.com/SpecSheet/DSP-K-4353-SD-DST%20Rev%20B.pdf Best regards, Tanya

Hi, Brendan! Thank you for your question. The diameter of the spout on the model 9159-DST is 1-3/8". Best Regards, Rosanna

Hello! This model uses the RP73000 cartridge. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi, Hiker! Thank you for your question. The Delta 9959-DST faucet at 40 PSI will give a 1.3 gpm flow rate. Best Regards, Rosanna

Dear Fcradit, Thank you for your question! If debris is trapped in the wand assembly, please remove the wand from the hose and try lightly tapping it upside-down on the counter. You may also try soaking it in a 50/50 white vinegar and water solution for about 15 minutes to help remove minerals. Best regards, Tanya

Hi, Kristen! Thank you for your question. Always blot dry any water from the faucet surface. Allowing water to evaporate on the surface can lead to build up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean soft cloth should help keep your product looking beautiful. To remove water spots, use warm water and a soft, damp cloth. Hard water stains may be removed using a 50/50 solution of white vinegar and water. Make certain that you rinse the surface thoroughly with water afterward. If additional cleaning is required, all of our finishes may be cleaned with the following household cleaners: Formula 409® Antibacterial All Purpose Cleaner, Fantastik® All Purpose Cleaner, or Windex® Original Glass Cleaner, when used according to the manufacturers' instructions for use. Avoid using the following which can damage your finish: Avoid industrial cleaners and abrasive cleaners, such as those used for toilet bowls, green Scotch-Brite heavy duty scrub sponges, Scrubbing Bubbles Bathroom Cleaner and Lysol Basin Tub, Soft Scrub, and Tile Cleaner. Avoid products that state on the label that they remove tarnish and rust and those containing hydrofluoric, hydrochloric and/or phosphoric acids and caustic agents. Avoid harsh abrasives or polishes. Avoid bleach-based cleaners. Best Regards, Rosanna

Hi JD2020, Thank you for your question! The Delta Trinsic Pull-Down Kitchen 9159-DST faucet requires a 2 1/2" (64 mm) maximum deck thickness with the 10 1/2"escutcheon plate or a 3" (76 mm) maximum deck thickness without the 10 1/2" escutcheon plate. Please feel free to call, email, or message us on social if there is anything you need. https://media.deltafaucet.com/SpecSheet/DSP-K-9159-DST%20Rev%20F.pdf Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet

Thank you for your question, Jim. You can do this by removing the button cover on the bottom of the handle, then tightening the set screw with an 1/8" Allen wrench. Best regards, Jon