Cassidy

Single Handle Pull-Down Bar / Prep Faucet with Touch2O® Technology

Download Image

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 61ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
  • Featuring Delta Touch2O Technology: touch it on, touch it off
  • Delta MagnaTite Docking holds spray wand firmly in place
  • 1 or 3-hole installation
Finish: Champagne Bronze
List Price*: $843.35
Base Parts
9997T-CZ-DST
List Price*: $843.35
Configurable Parts
Touch it on. Touch it off. Whether you have two full hands or 10 messy fingers, Delta® Touch2O® Technology helps keep your faucet clean, even when your hands aren’t. A simple touch anywhere on the spout or handle with your wrist or forearm activates the flow of water at the temperature where your handle is set. The Delta TempSense™ LED light changes color to alert you to the water’s temperature and eliminate any possible surprises or discomfort. Delta® MagnaTite® Docking uses a powerful integrated magnet to pull your faucet spray wand precisely into place and hold it there so it stays docked when not in use. Delta® faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. Electronic parts are backed by our 5-year electronic parts warranty. *Industry standard is based on ASME A112.18.1 of 500,000 cycles.
  • With Touch2O Technology a simple touch anywhere on the spout or handle will start and stop the flow of water
  • Helps keep your faucet cleaner, because washing the mess off your hands shouldn't involve making a mess of your faucet
  • LED light signals blue when touch mode is active and flash red when batteries are running low
  • Automatic water flow shut-off after four minutes helps conserve water
  • Integrated TempSense LED light shows water temperature, changing from blue to magenta to red as temperature increases
  • Battery operated (6 AA included) for up to 2 year battery life or 6 C (not included) for up to 5 year battery life
  • Intuitive Touch2O® Technology can sense the difference between a touch and a grab, reducing the chances of false activation
  • Optional A/C adapter EP73954 may be ordered separately
  • MagnaTite Docking uses a powerful integrated magnet to snap your faucet spray wand precisely into place and hold it there so it stays docked when not in use and doesn't droop over time
  • DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
  • Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines
  • 1 or 3-hole 8" installation
  • Optional escutcheon available for purchase separately
  • ADA Compliant
  • High-arc pull-down swivels 360degrees
  • 62 in. long hose provides outstanding reach

Installation Information


1 or 3-hole 8" installation


  • Escutcheon: Optional Escutcheon Available
  • Flow Rate: 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa
  • Spout Height: 15"
  • Spout Length: 6-3/8"
  • Deck to Outlet: 9-5/32"
  • Fittings Type: 3/8" compression fittings
  • Deck Thickness: 2.5"
  • Supply Lines: Included InnoFlex® Pex-C Supply Lines
  • Valve Type: Electronic with Euromotion DIAMOND Valve
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 9ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

I want to buy the power supply for this faucet ....

to replace the battery pack. I cannot find it on this site?
Asked by: chuck
Hi Chuck, Thank you for your question. The power supply is part number EP73954. Please note that the power supply only works with solenoids manufactured after January 1, 2015. Compatible solenoids will have a gray housing. If the solenoid assembly is black, you will first need to install the EP74855 solenoid (EP74855XX for Venetian Bronze models). http://www.deltafaucet.com/repairparts/details/ep73954.html http://www.deltafaucet.com/repairparts/details/ep74855.html Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2016-05-18

Can the handle be placed on the left of the faucet?

Asked by: Linda
Thank you for your question Linda. Because the spout rotates 360˚,the 9997T-DST can be installed backwards which would put the handle on the left hand side, however the LED base is not adjustable and will face the wall. The handle will also function backwards moving toward the wall to produce warm to hot water. Best regards, Edward
Answered by: DeltaFaucet234
Date published: 2017-08-26

Can you hook up a portable dishwasher to this faucet?

Asked by: Adorak
Hi Adorak, Thank you for your question. Portable dishwashers may be connected to any Delta kitchen faucet that is not a Pull-out or Pull-down design. Portable dishwashers should never be connected to Pull-out or Pull-down kitchen faucets due to potential pressure fluctuations during dishwasher operation that may result in rupturing of the hose. Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2016-08-31

How do I replace the batteries? It's a Cassidy model

Asked by: Snapper
Hello Snapper! Thank you for your question. To replace the batteries in your Delta Cassidy Touch2O 9997T-DST faucet, you would need to locate the battery box and remove the top (that has the red/black wires connected to it) from it. Then you can replace the batteries. Please see in the Quick Start Guide link, that I have provided below, on pages 33 and 34 of section 5 for pictured directions. https://media.deltafaucet.com/QuickstartDiagram/QS-82180%20Rev%20E.pdf Best regards, Tanya
Answered by: Tanya
Date published: 2017-09-18

The faucet drips after touching it to turn water off, but if manually shut off it doesn't drip. Any ideas to fix the issue

Asked by: NathanH
Hi, NathanH! Thank you for your question, and I am sorry to hear that you are experiencing a leak from your Delta faucet. Leaking from the faucet in the touch off mode comes from debris inside the solenoid. You may flush the solenoid by following these next steps. 1. Turn the water supply by putting your handle in the manual off position. 2. Disconnect the sprayer hose by removing the blue retaining clip. 3. Place a bucket under the male adapter coming out from the solenoid. 4. Run water into the bucket for 2-3 minutes. Debris located inside the solenoid should be flushed out after completing these steps. If this does not fix the issue, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2018-02-21

Where is the battery box to replace batteries. We can't find it and your design page doesn't really show this. Thanks

Asked by: janet
Hi, Janet! Thank you for your question. The Delta 9997T-DST faucet battery box is located under the sink, usually under the cabinet, and either laying flat on the floor of the cabinet or sometimes placed on the wall of the cabinet. If you should need further assistance with this, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2018-09-06

How do you turn off the touch feature?

Asked by: Vicki
Hi Vicki, Thank you for your question! Below is the instruction manual for the 9997T-DST. You can find the step by step instructions on page 46 for how to do a manual by pass on the faucet. http://www.deltafaucet.com/customersupport/documentation/9997t-cz-dst.html?document=mi&fromDetailArea=kitchen&documentIndex=0#flashWrapper Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2016-02-22

How large does the hole in the sink need to be for installation?

I want to put this in a bathroom sink.
Asked by: Barb
Thank you for your question, Barb. The hole should be 1 1/4" - 1 1/2" in diameter. Please refer to the Technical Specifications linked below for this and other measurements. https://media.deltafaucet.com/SpecSheet/DSP-K-9197T-DST%20Rev%20D.pdf Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2016-09-23
  • y_2019, m_3, d_20, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_US, sid_9997T-CZ-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 43ms
  • QUESTIONS, PRODUCT