Single Handle Kitchen Faucet
Classic
Model#: 100-DST
100-DST is rated
out of
5 by
33.
-
Water-Efficient
-
No-Lead Compliant
- DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
- Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines
- 3-hole 8" installation
- ADA Compliant
- Standard spout swivels 180degrees
DIAMOND™ Seal Technology
Installation Information
3-hole 8" installation
- Flow Rate: 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa
- Spout Height: 10"
- Spout Length: 5"
- Fittings Type: 3/8" compression fittings
- Deck Thickness: 1"
- Supply Lines: Included InnoFlex® Pex-C Supply Lines
- Valve Type: DIAMOND™ Seal Valve
Rated 1 out of
5
by
Corvette 22 from
Too many pieces to install
I am returning these items and have been waiting for the pick up truck to come and get them for two weeks
Date published: 2018-07-14
Rated 5 out of
5
by
Barb from
The handle is
The handle is just the right height for me. I didn't want one too high!
Date published: 2018-06-02
Rated 4 out of
5
by
Margery from
Looks good
Have had this faucet installed for about 2 months and I'm still trying to turn it off in one move. It drips then I have to make a second attempt.
Date published: 2018-03-08
Rated 5 out of
5
by
Ltb3 from
Nice product
Purchased a couple weeks ago. Very easy to install. Works well.
Date published: 2018-03-07
Rated 5 out of
5
by
lexbyam from
This is a great faucet!
This is great! I love this faucet.
Date published: 2018-02-08
Rated 3 out of
5
by
Kennotte from
This product has some good features and several bad ones
The DST 100 delta faucet set has some good features and some bad.
Good
1. The unit has larger water supply line, hot and cold, than the old one I had, therefore more water. (also Delta)
2. the spout has be redesigned and is not in the way as the previous set was.
3. The unit is relativity easy to install, if being under the sink is discounted.
Bad
1. I don't like plastic lines from the cutoff valves to the faucet, instead of copper
2. I do not like all the plastic coverings used in the DST 100
3. I do not like the cartridge in the body of the unit (complete replacement) rather than replaceable washer, etc.
4. For all the plastic and chrome plastic I think the unit was a bit pricey.
Date published: 2018-01-18
Is a spray attachment available for my faucet?
My faucet: 100-DST
I believe it is or at least it is listed in the parts breakdown for the DST 100
Date published: 2018-01-18
The faucet I'm replacing has a spray attachment. Can I attach that to the Delta 100-DST I bought? Or do I need the Delta sprayer?
If I do need the Delta spray attachment, does Home Depot carry it?
to attach a sprayer Delta will be required due to provision already built into the water lines
Date published: 2018-01-18
winterizing
I spend the summers in northern Minnesota and when the winter arrives I close my place down (drain all water lines). How do I winterize this faucet?
winterize by draining the lines and faucet or charge the lines with anti-freeze like a travel trailer.
Date published: 2018-01-18
Is faucet body brass?
some type of metal, thought was brass.
Date published: 2018-01-18
Can I remove chrome plating to suit with number of holes in my old sink.
My Sink has only one hole and I was thinking to remove the chrome plating to suit. Is it possible to remove the plating?
see answer stating single hole
Date published: 2018-01-18
Would like to buy a swivel aerator for a 100-dst faucet. Where can I find one?
I would think at a hardware store or one of the major home and garden stores.
what you want is one to replace the aerator
Date published: 2018-01-18
3 hole installation for 100-DST?
Current sink only has 3 holes; no sprayer. Do I just leave the diverter plug in the unit? (part # RP54269)
yes three hole, or single hole installation
Date published: 2018-01-18
is the handle metal or plastic?
The handle is metal
Date published: 2018-01-18
