Single Handle Pull-Out Kitchen Faucet in Venetian Bronze

Model#: 4153-RB-DST
Single Handle Pull-Out Kitchen Faucet in Venetian Bronze
Model#: 4153-RB-DST
List Price: $74200
PRODUCT FEATURES
The Multi-Flow™ Spray Wand allows you to toggle from a water-efficient spray or stream for everyday tasks to a high water flow to fill pots and other large containers 33% faster*. Delta® faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. Kitchen faucets with Touch-Clean® Spray Holes allow you to easily wipe away calcium and lime build-up with the touch of a finger. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. *Industry standard is based on ASME A112.18.1 of 500,000 cycles. *Temporary on-demand flow increase based on standard 1.5GPM rate at 60psi.
  • Multi-Flow Spray Wands allow you to toggle from a water-efficient spray or stream for everyday tasks to a high water flow to fill pots and other large containers 33% faster
  • Soft, rubber Touch-Clean spray holes allow you to easily wipe away calcium and lime build-up with the touch of a finger
  • DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
  • Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines
  • 1 or 3-hole 8" installation
  • Optional escutcheon included for use with additional mounting configurations and a cohesive look
  • ADA Compliant
  • High arc pull-out swivels 360degrees
  • 54 in. long hose provides outstanding reach
Special Information
Warning Image
California Prop 65 WARNING
Technology and Special Features
ADA Compliant
Touch-Clean®
No-Lead Compliant
Water-Efficient
Diamond Seal® Technology
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Installation Information
1 or 3-hole 8" installation
1 or 3-hole 8" installation
Connection Type :
3/8" compression fittings
Flow Rate :
1.5 gpm @ 60 psi, 5.7 L/min @ 414 kPa
Overall Height (in.) :
12-5/16
Valve Type:
Ceramic Disc

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
Rated 1 out of 5 by from Annoying - replacing after 6 months The turn-off mechanism is very sensitive. If you don't hit the point with the handle just right it drips/flows. It is centered so you have to bring the handle down and then up to the exact spot. I have mastered it 95% of the time but my husband is ready to yank it out. I am shopping for a replacement today.
Date published: 2026-01-29
Rated 5 out of 5 by from I would recommend this product to anyone This faucet is so easy to clean
Date published: 2025-02-24
Rated 2 out of 5 by from Disappointed Purchased this faucet for a kitchen renovation. Being a Delta product, I assumed it would be well engineered and manufactured. I am disappointed. Although attractive I have found the exact same problems identified by a reviewer of this faucet published five years ago. See below: "Faucet looks nice. Wanted something streamlined and not too tall. The pressure fit handle is a bummer. You really have to push hard to get it back in all the way. Usually it's not all the way seated which works but doesn't look nice. The handle to turn it on and off is very fussy and if you don't push it in just right it doesn't shut off. It's not a huge deal but annoying enough to make me dislike this particular design. It runs really hot or cold, the adjustment for warm is so narrow that I cant get warm unless I'm very careful to adjust it. I don't know why 99% of the positioning is burning hot or cold and 1% is warm."
Date published: 2025-01-16
Rated 3 out of 5 by from Great Faucet with Poor Durability For the most part the faucet is ok. The wand didn't last a full year before the buttons started to stop working properly. I tried descaling it thinking there might have been some gunk build up in the parts. That helped the flow a bit but after a few more months the buttons themselves stopped changing the water flow type to where the water came out using both flow types at once. For the price of this faucet (Artic Stainless) I would have expected the wand to be higher in quality and durability. No reason I should have to replace the wand after 12 months of use.
Date published: 2024-11-18
Rated 1 out of 5 by from poorly constructed kitchen faucet Poorly constructed. Original and replacement leaked. I had to incur the expense of original installation and removal and replacement with different brand.
Date published: 2024-08-12
Rated 4 out of 5 by from Pluses and minuses Nice looking. Very difficult to find the “just right spot for warm water, it’s easy for just hot or just cold”. Hose for sprayer is too long so the weight on the bottom just sits on the bottom of the cabinet defeating its purpose of locking it back to the faucet. Sprayer is chintzy plastic. If I knew all that from the before installing I would have chosen something else. Do like the lower profile
Date published: 2024-04-21
Rated 3 out of 5 by from Nice faucet but Flow Switch is Cheap About a year after we bought it the flow switch stopped working, It Wouldn't switch back from spray to flow, so the only way to go back to flow is to turn it off and on. Now, about three years in, the flow switch is leaking water wildly, so it gets everything wet around the sink. Seemed well made when we bought it and maybe three years is the life of a faucet, but we had our former faucet for more than 10. Disappointing.
Date published: 2023-12-03
Rated 5 out of 5 by from Sleek Kitchen Faucet Beautiful faucet - clean and simple. Pull out faucet works smoothly. Very happy with purchase.
Date published: 2023-11-08
  • y_2026, m_6, d_9, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.46
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_62
  • loc_en_US, sid_4153-RB-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 12ms
  • reviews, product
Q&A

Can the operating lever on the 4153 dst faucet be installed on the left side of the faucet?

Asked by: Dee
Hi Dee, Thank you for your question. Yo do have the option of placing the handle to the left. The hot and cold will be reversed on the lever unless you switch the supply lines as well. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

Linden 4153-dst https://media.deltafaucet.com/SpecSheet/dsp-k-4153-dst_C.pdf shows 2 below sink depths 34 15/16" and 33 7/16": are these distances required? Also a 2 x 1 5/16" and 3 x 1 5/16" holes: how does this relate to 1 or 3 holes? Thanks.

Asked by: Ellen
Thank you for your question, Ellen! The hot water line is 34 15/16" inches long, and the cold water line is 33 7/16" inch long. 2 x 1 5/16" refers to the number of holes and size, if the single hole escutcheon is used, but the correct measurement is 1 x 1 5/16" since only 1 hole would be needed. 3 x 1 5/16" refers to the number of holes and size, if the 3 whole escutcheon plate is used. Feel free to contact us directly, if you need further assistance. Best Regards, Benjamin
Answered by: Delta Faucet
Date published: 2024-03-28

2 Questions on Operation

1. Which way do you move the side-mounted lever handle to turn the water ON - Up or Down? 2. Does the pull down “sprayer assembly” have a water shut-off button? That is, can you shut the water flow completely OFF from the sprayer assembly?
Asked by: GrumpyGeezer
Thank you for your question. Delta Faucet model # 4153-SS-DST is turned on by pulling the handle to the side. The water is made hotter by pushing the handle to the back and made colder by pulling it to the front. The only way to completely shut off the water is to use the handle on the side. The spray wand will switch from spray to stream but not turn the water off completely.
Answered by: Delta1
Date published: 2024-03-28

Problem with mounting this faucet -- the nut underneath the counter only tightens to a certain point, and it doesn't fix the faucet in place, so the entire faucet rotates when I use the handle. Is a better mounting kit available?

Asked by: Elizabeth
Hello! Unfortunately we do not offer alternate mounting hardware. Please contact us directly by phone at 1-800-345-3358 or email at customerservice@deltafaucet.com as we would like to resolve this matter for you at this time. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Timothy
Date published: 2026-01-12

Is the sprayer assembly plastic or metal on the chrome 4153-DST faucet? If plastic, do any of your pull-out kitchen faucets have a sprayer assembly that is metal? Also do you have any pull-out kitchen faucets with the MagnaTite feature?

Asked by: Gary
Hi, Gary! Thank you for your question. All of our sprayer assemblies for our Delta kitchen faucets are non-metallic. The MagnaTite Technology Feature is only available on our Pull-Down Sprayer faucets. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

What is the function of the smaller button behind the stream/spray toggle?

Asked by: HJanet
Hi, HJanet! Thank you for your question. The additional, smaller button is a Multi-Flow button that allows you to toggle from a water-efficient spray or stream for everyday tasks to a high water flow to fill pots and other large containers 33% faster. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

Does this have the magnet that locks the sprayer in place like some of your other models?

Asked by: EddieR
Hello EddieR, Thank you for your inquiry! The Delta Linden Kitchen 4153-DST faucet does not have the MagnaTite docking feature for the wand/sprayer assembly. https://media.deltafaucet.com/PartsDiagram/DPD-K-4153-DST.pdf Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

We have difficulty getting the pull out sprayer to retract all the way into the handle. We frequently have to push it to get it to go in fully.

What can we do to make this easier?
Asked by: Sherry
Hi Sherry, Thank you for your question. The weight on the hose helps placing the wand back into place but does not retract the hose. It is normal to have to place the wand back into the spout to finish the connection. Please verify that the wand assembly hose is not getting hung up on other items below the sink. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2025-10-15

I seek a 2.2 GPM aerator to improve the water flow in each of my Delta Linden 4153-AR-DST faucet 1353-AR-DST faucet.  Which mode(s) of aerator should I use? 

Asked by: Popter
Hello, Thank you for your question! Model 4353-DST does not feature a removeable aerator. Model 1353-DST uses the RP73944 1.8gpm aerator. https://www.deltafaucet.com/parts/product/RP73944.html Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Timothy
Date published: 2025-03-25

Is there a 2–3 inch extension tube compatible with the Delta Faucet 4153-DST that matches the arc's shape and finish, allowing for wider horizontal reach without pulling out the sprayer?

Asked by: James
Hello, Thank you for your question! No, unfortunately we do not offer an extension like this. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Timothy
Date published: 2025-04-02

Can you toggle between spray and stream, or do you have to hold the button down for spray?

Asked by: Sandy
Thanks for your question, Sandy! The stream and spray setting are controlled by a toggle switch, so you won't need to hold it down. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2016-07-27

Are your products nickel-free?

Asked by: Daisy
Thank you for your question, Daisy! Our "Brilliance" PVD finishes as well as Chrome finishes include a layer of nickel as part of the finishing process, however these finishes all have other durable protective layers covering the nickel. DST products have no metal exposure to water, therefore there is no nickel exposure with the internal components. Non-DST product do have some metal exposed in the waterway, and there could be some components of non-DST products that contain nickel. If you have a Nickel Allergy we recommend a Brilliance PVD finish as well as a DST model. For more information on this type of finish, please click on the link below. https://www.deltafaucet.com/design-innovation/innovations/kitchen/brilliance-finishes Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Can this faucet be used with one of the 3" escutcheons?

We are trying to cover up a faucet hole that was drilled about 1/2" too big. We would rather not use the large three hole escutcheon, so we were wondering if any of the smaller escutcheons would fit with this faucet. If so, which model number would fit?
Asked by: tmg
Thank you for your question. Delta Faucet model # 4153-DST can either be mounted as a 1-hole or a 3-hole installation. The single hole installation has an escutcheon that is 2 3/4 inches wide and the three hole installation has a 10 inch escutcheon plate. These are the only two escutcheon plates that will work with this faucet.
Answered by: Delta1
Date published: 2024-03-28

How far does the control lever rotate forward and back to control temperature? The rear limit is shown in the drawing on the specification sheet, but I would like to also know how far forward it goes. Please specify in angular degrees.

Asked by: John S
That seems like it would prevent fine control of temperature.
Answered by: John S
Date published: 2024-03-28

The sprayer assembly does not easily fit back into the spout assembly. It is not the hose retraction that is an issue.

We always have to manually push the sprayer assembly back and sometimes it does not go in all the way.
Asked by: Sherry
Hi Sherry, Thank you for your question. The wand is sealed tightly when pushed into the spout and there is some resistance. Try putting a small amount of vegetable oil on the 2 exposed o-rings on the black portion of the wand to slide in more easily. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

How do I remove faucet filter to removed mineral buildup?  (Model 4153-DST)

Asked by: Mrs C
Hello Mrs C, Thank you for your question. The Delta Linden Kitchen 4153-DST faucet does not come with a removable aerator assembly. We do not recommend disassembling the sprayer assembly. To dissolve any sediment that may collect in the aerator or spray face, just soak the face of the spray assembly in a 50/50 or stronger mixture of white vinegar and tap water for 10 to 15 minutes. The large particles of debris are caught in the bottom end of the spray assembly, where it connects to the hose. Just unscrew the spray assembly from the hose assembly and flush the debris out with water from the hose. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

Delta 4153-AR-DST kitchen faucet

I need to replace set screw. I can’t figure how to get the handle in the correct position. Can you help me?
Asked by: Linda67
Thank you for your question, Linda. We would be happy to help. First, slide the handle onto the stem of the cartridge and ensure that the set screw hole is facing the faucet. The set screw should meet the flat part of the stem. Next, move the handle to the on position to provide more room, then tighten the set screw with a 1/8" Allen wrench. Please refer to the Installation Instructions for a diagram. https://media.deltafaucet.com/MandI/80328%20Rev%20B.pdf Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

It's difficult to completely shut off the faucet (home is 2-1/2 years old). Seems like a new washer is needed but, we disassembled it and don't see a washer to replace. Should we purchase a replacement valve assembly?

Asked by: Linda
Hi, Linda! Thank you for your question, and I am sorry to hear that you are experiencing a leak from your Delta faucet. We recommend to clean the bottom puck on the valve cartridge assembly and retighten the bonnet nut to stop the leak. To do this, turn the water off at your shut off valve. Remove the handle. Unscrew the bonnet nut. Pull the valve cartridge out and clean the bottom puck on the valve cartridge assembly. Reinstall the valve cartridge assembly and retighten the bonnet by turning clockwise, to the right. Install the handle back on and turn the water back on. Test the faucet. If the faucet still leaks, we recommend to replace both the valve cartridge assembly, RP50587, and the bonnet nut, RP51503. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

Does the Linden pull-out kitchen faucet (high arc) swivel?

I noticed that the details about some of your other faucets included "swivels 360 degrees." Does this one as well?
Asked by: Jen
Thank you for your question. Delta Faucet model # 4153-DST does swing 360 degrees.
Answered by: Delta1
Date published: 2024-03-28

My current water faucet( not Delta) has a “weak” flow. For example, when water comes out of the faucet the flow is 3/8 in diameter and no bubbles. Does this Delta have a restricted flow as well?

Asked by: Asb0215
Hello Asb0215! Thank you for your question regarding the Delta Faucet LINDEN™ Linden™ Single Handle Pull-Out Kitchen Faucet In Chrome MODEL#: 4153-DST! I do apologize that this information wasn't readily available but I am happy to help. The Delta 4153-DST has a max flow rate of 1.5 GPM @ 60 PSI (5.7 L/min @ 414 kPa) in spray and standard aerated mode! Please reach out to us directly if you need further assistance. Thank you for being a loyal Delta Faucet customer. Best Regards, Antoine
Answered by: Delta Faucet
Date published: 2022-09-20

IS THERE ANY DIFFERENCE BETWEEN THE LINDEN SINGLE HANDLE PULL OUT KITCHEN FAUCET 4153SSDST, SOLD AT MERNARDS VS PLUMBING WHOLESALER?

IF SO, WHAT ARE THEY?
Asked by: RAY
Thank you for your question. Delta Faucet model 4153-SS-DST is the exact same faucet, inside and out, no matter where it is sold.
Answered by: Delta1
Date published: 2024-03-28

Is the Linden 4153-SSSD-DST and 4153-SS-DST the same faucet other than the soap dispenser? Is the pull down sprayer magnetic?

Asked by: Roberta
Thank you for your question. Delta Faucet models 4153-SSSD-DST and 4153-SS-DST only have a difference of a soap dispenser in the 4153-SSSD-DST. The pull-down sprayer is not magnetic.
Answered by: Delta1
Date published: 2024-03-28

What is height of faucet from countertop. 

Asked by: Deb H
Hi Deb H, Thank you for your question. The total height of the faucet is 12 5/16". Below is a link to the technical specification sheet: https://media.deltafaucet.com/SpecSheet/DSP-K-4153-DST%20Rev%20C.pdf Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2024-03-28

Is there a ball joint or other pivot where the sprayer hose connects to the sprayer head?

Asked by: John S
Thank you for your question, John S! The hose assembly is just screwed into the back/top of the wand/sprayer assembly, there is no ball joint connection of the Delta Linden Kitchen Pull-Out 4153-DST faucet model. https://media.deltafaucet.com/PartsDiagram/DPD-K-4153-DST.pdf Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

I have a new Delta 4153 DST kitchen faucet. We have well water, and the flow rate is low. I would like to remove the flow restrictor on this faucet, but I do not see one listed on the parts list. Where is it?

Asked by: Gino
Thank you for your question, Gino. There is a flow restrictor located inside the wand assembly. However, we do not recommend to remove or modify the restrictor as this will void the warranty and may prevent it from complying with plumbing codes in your area. Please refer to the Technical Specifications to find the flow rate at 60 PSI. If you are not getting good flow, please check for debris in the back of the wand assembly as this is the most common cause of a reduced flow rate besides low water pressure. https://media.deltafaucet.com/SpecSheet/dsp-k-4153-dst_C.pdf Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

linden 4153-dst: what are the dimensions of the escutcheon?

Asked by: Ellen
Thank you for your question, Ellen! The escutcheon plate on model 4153-DST, has a length of 10 1/2" inches and the holes have an 8" inch center to center spread. Best Regards, Benjamin
Answered by: Delta Faucet
Date published: 2024-03-28

Delta Kitchen faucet 4153-RB-DST SINGLE HANDLE CARTRIDGE LEAKING.. I WOULD LIKE TO REPLACE CARTRIDGE AND NEED INFORMATION FROM DELTA REGARDING REPLACEMENT. THANK YOU

Asked by: RON1936
Hi RON1936, Thank you for your question about the Delta Faucet model 4153-RB-DST. Please accept our sincere apology for the inconvenience you are experiencing. We are happy to help! If the faucet leaks from the spout outlet while off, we recommend flushing the faucet and replacing the RP50587 cartridge if the issue remains. See here for more information: https://support.deltafaucet.com/s/article/What-do-I-do-if-my-single-handle-kitchen-faucet-drips-from-the-spout-outlet-DST-model Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-10-25

Hi, While servicing my Linden 4153-RB-DST single handle kitchen faucet, I mistakenly removed the hose from the faucet body. Re-installing it, it gets stuck at the swivel point on the faucet neck. Is it possible to re-install?

Asked by: Kent
Hi Kent, thank you for contacting Delta Faucet Company! Yes, you can re-install the hose in the faucet. To install the hose into the faucet, please gently twist and wiggle the hose in the base. You can also attach a thin string such as dental floss to help gently pull it down as someone gently pushes the hose through the faucet. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Why won’t this ship to California 

Asked by: Debs
Hi Debs, Thank you for your question about the Delta Faucet model 4153-RB-DST. We apologize for any inconvenience with ordering this faucet. The 1.5 gpm flow rate should meet California requirements. We will need more information to better assist you. Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist (800) 345-3358
Answered by: Delta
Date published: 2025-11-18

Can this faucet be converted to touch on/off technology?

Asked by: Billybob
Hi Billybob, Thank you for your question about the Delta Faucet model 4153-RB-DST. Unfortunately, this faucet would not convert to Touch2O technology. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-04-29
  • y_2026, m_6, d_9, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.46
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_65
  • loc_en_US, sid_4153-RB-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 50ms
  • questions, product
PART LIST

PART LIST

Image-RP37490

Delta®

Delta® Stabilization Plate

List Price: $29.40
Online Price: $23.52
Free Ground Shipping All Orders $49+

RP37490

3.20 5
Image-RP21945

Delta®

Delta® Soap / Lotion Dispenser - Nut

List Price: $8.30
Online Price: $6.64
Free Ground Shipping All Orders $49+

RP21945

4.00 2
Image-RP63263

Delta®

Delta® Adapter Kit - PEX Compression (4)

List Price: $45.35
Online Price: $36.28
Free Ground Shipping All Orders $49+

RP63263

3.67 3
Image-Master-RP51502

Delta®

Delta® Bonnet Cap

List Price: $18.05 - $49.70
Free Ground Shipping All Orders $49+

RP51502

Image-Master-RP62773

Linden®

Linden® Wand Assembly - Pull-Out

List Price: $130.70 - $205.35
Free Ground Shipping All Orders $49+

RP62773

Image-RP62777

Linden®

Linden® Friction Ring

List Price: $18.45
Online Price: $14.76
Free Ground Shipping All Orders $49+

RP62777

Image-RP60924

Delta®

Delta® Wrench - DIAMOND™ Seal Technology Faucets

List Price: $25.90
Online Price: $20.72
Free Ground Shipping All Orders $49+

RP60924

5.00 2
Image-RP13938

Delta®

Delta® O-Ring

List Price: $8.25
Online Price: $6.60
Free Ground Shipping All Orders $49+

RP13938

4.50 2
Image-RP30395

Delta®

Delta® Soap / Lotion Dispenser - Vented Funnel

List Price: $7.05
Online Price: $5.64
Free Ground Shipping All Orders $49+

RP30395

5.00 3
Image-Master-RP62775

Linden®

Linden® Metal Lever Handle Kit

List Price: $65.10 - $92.20
Free Ground Shipping All Orders $49+

RP62775

Image-Master-RP62776

Linden®

Linden® Handle Set Screw & Button

List Price: $25.05 - $33.70
Free Ground Shipping All Orders $49+

RP62776

Image-RP50390

Delta®

Delta® Quick Connect Hose & Clip - 54" - Pull-Up / Pull-Down DST Faucets

List Price: $108.65
Online Price: $86.92
Free Ground Shipping All Orders $49+

RP50390

3.96 27
Image-RP51503

Delta®

Delta® Bonnet Nut w/ Valve Seal

List Price: $35.10
Online Price: $28.08
Free Ground Shipping All Orders $49+

RP51503

5.00 3
Image-RP50788

Victorian®

Victorian® Gasket

List Price: $17.25
Online Price: $13.80
Free Ground Shipping All Orders $49+

RP50788

Image-RP50587 Secondary Image-RP50587

Delta®

Delta® Cartridge - DIAMOND™ Valve - 1H

List Price: $77.10
Online Price: $61.68
Free Ground Shipping All Orders $49+

RP50587

2.89 230
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.