Single Handle Pull-Down Kitchen Faucet with Touch₂O® Technology in Arctic Stainless

Thank you for your question, Matt! The back or bottom of the box will tell you where your specific faucet model was made. As our models may be made in different locations depending on available resources, there is not a list saying where each is made. We do manufacture Delta faucets in our plant facilities in Greensburg, Indiana; Jackson, Tennessee; London, Ontario, CA and Panyu, China. No matter where in the world our products are sourced, manufactured or assembled, they are built to Delta Faucet Company’s exacting specifications and are quality tested to ensure long-lasting performance. Best regards, Edward

Thank you for your question Kelli! These are both popular finishes, however, Chrome is most commonly purchased for its versatility. Although our finishes are extremely durable, they can be damaged by harsh abrasives, chemicals or polish. To clean, we suggest simply wiping gently with a damp cloth and blotting dry with a soft towel. Best regards, Edward

Thank you for your question, Sibylle! Our Delta faucets can be installed in other countries, however they may require supply adapters. The Delta Trinsic Pull-Down Touch2O 9159T-CZ-DST faucet is designed to connect to 3/8" compression fittings. Please also note that the warranty will not apply to faucets installed in Germany. Best regards, Tanya

Hi, Brian! Thank you for your question. The Delta 9959T-DST Faucet uses solenoid assembly EP74855. Here is a link to the solenoid assembly: https://www.deltafaucet.com/parts-product-detail?modelNumber=EP74855 Best Regards, Rosanna

Hello, Thank you for your question! We recommend cleaning Delta Faucet products with a 50/50 solution of white vinegar and water. If additional cleaning is required the following products are safe to use on all Delta Faucet finishes, when used according to the manufacturers’ instructions for use: Formula 409® Antibacterial All-Purpose Cleaner Fantastik® All-Purpose Cleaner Windex® Original Glass Cleaner Other gentle all-purpose or multi-surface cleaners may also be used. Please do not use anything labeled “all-purpose bathroom cleaner". Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Thank you for your question. Delta Faucet model # 9959T-DST swivels 360 degrees.

Yes, and the magnetic seat keeps the head in place, every time.

Hi suan25, Thank you for your question! The faucet can be operated manually by disconnecting the battery box while the water is running. It will remain in manual mode until you reconnect the batteries. Another method is to remove the solenoid assembly and connect the hose directly to the faucet under the sink. Best regards, Jon

Hi JC, Thank you for your question. The faucet is only designed for the handle to be installed on the right side due to the rotation of the handle and the position of the light at the base. Best regards, Jon

Hello, BenH. Thank you for your question! The light will flash red 3 times when the faucet is turned on or off if the batteries are low. We recommend installing a brand new set of non-rechargeable, Duracell or Energizer batteries. Please refer to page 16 of the Instructions for more information: https://media.deltafaucet.com/MandI/92519%20Rev%20H.pdf Best regards, Jon

Hi, Thank you for your question. The 9159T-DST does meet the California flow rate requirements as the flow rate for the faucet is 1.20 gpm. Best Regards, Rosanna

Hi triplee121, Thank you for your question. We recommend placing the battery box on the floor of the cabinet as it is used to establish a base-line for the Touch2O feature. The closer to the ground it is the better reading it will get. Best regards, Jon

Dear Daylec, Thank you for your question. Please see the Maintenance/Installation document below, for the Delta Trinsic Touch2O Kitchen Pull-Down 9159T-DST faucet. https://media.deltafaucet.com/MandI/92519%20Rev%20G.pdf Best regards, Tanya

Hi, Donna! Thank you for your question. Ghosting from your Touch 2O Faucet can most likely be resolved by adjusting the installation below the sink. Please make sure that no wires are touching metal objects or other wires, and that the battery box is placed on the floor of the cabinet, 2 inches from the sides. Please try unplugging the black LED wire (looks like a headphone jack) and plugging it back in until it clicks. Next, reset the solenoid by removing the cap from the battery box for one minute and reconnecting it. Please also be sure to use a new set of brand name, non-rechargeable batteries. Please feel free to call, email, or message us on social. Best regards, Rosanna Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet

Hi, Newton123! Thank you for your question. The Delta 9159-DST Faucet can be operated manually without the Touch2O Function. For manual operation, first turn the handle to the 'off' position. Under the sink, make sure you have a bucket and towels ready for any excess water coming out. Remove the two blue clips on the top and bottom of the solenoid assemblies. Remove the water lines from the top and bottom of the solenoid. Remove the solenoid assembly entirely. Connect the two water lines together and secure with one of the blue clips. Turn the handle to the 'on' position to test. Best Regards, Rosanna

Thank you for your question, Melissa. Unfortunately, we are unable to make a suggestion regarding other brands. Please click the link below to see our selection of Beverage Faucets in the Champagne Bronze finish. These have a single supply line that can be connected to either cold or hot water. https://www.deltafaucet.com/kitchen/specialty-faucets/beverage?facetFinish=champagnebronze Best regards, Jon

Is the part number interchangeable on different models? Thank you 

Hi, Jeff. Thank you for your question, and I am sorry that you are experiencing a leak from your faucet. Leaking from the faucet in the touch off mode comes from debris inside the solenoid. You may flush the solenoid by following these next steps. 1. Turn the water supply by putting your handle in the manual off position. 2. Disconnect the sprayer hose by removing the blue retaining clip. 3. Place a bucket under the male adapter coming out from the solenoid. 4. Run water into the bucket for 2-3 minutes. Debris located inside the solenoid should be flushed out after completing these steps. Best Regards, Rosanna

No you can not on this faucet.

Hi Sarah, Thank you for your question. We do not recommend hard wiring the model 9959T-AR-DST faucet. The faucet is designed to operate with battery power. Thanks, Dave

Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist

Hi Ren, Thank you for your question! The battery box is designed to be placed on the floor of the cabinet. To replace the batteries, squeeze the tabs on the sides of the cap and pull the cap off. Install the new batteries in the direction indicated on the outside of the box, then press the cap back on until it clicks into place. It will accept 6 AA batteries using the insert or 6 C batteries. Best regards, Jon

Hi CFaivre, Thank you for your question. The auto shut off is a safety feature of our touch faucets. To turn off the auto shut-off, you would need to fully remove the solenoid assembly. Best regards, Tanya

Hi, Mike! Thank you for your question. The sprayer assembly for the Delta 9159T-DST faucet can be removed from the hose assembly to be soaked in a solution of 50% white vinegar and 50% water mix. This can be soaked for an hour or even overnight to clean any debris that may cause the flow issue. Best Regards, Rosanna

Hi Katie, Thank you for your question. Please refer to page 51 of the instructions linked below for help. To clean the screen, unscrew the wand assembly from the hose. We recommend to soak the wand in a 50/50 solution of white vinegar and water for about 15 minutes and then rinse and wipe it off to help remove mineral buildup. https://media.deltafaucet.com/QuickstartDiagram/QS-82180%20Rev%20E.pdf Best regards, Jon

Hi, Meghan, Thank you for your question. We recommend to clean with 50% white vinegar and 50% water solution mix. Here is more suggestions from our FAQ: Always blot dry any water from faucet surface. Allowing water to evaporate on the surface can lead to build up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean soft cloth should help keep your product looking beautiful. To remove water spots, use warm water and a soft, damp cloth. Hard water stains may be removed using a 50/50 solution of white vinegar and water. Make certain that you rinse thoroughly with water afterward. If additional cleaning is required, all of our finishes may be cleaned with the following household cleaners: Formula 409® Antibacterial All Purpose Cleaner, Fantastik® All Purpose Cleaner, or Windex® Original Glass Cleaner, when used according to the manufacturers' instructions for use. Avoid using the following which can damage your finish: Avoid industrial cleaners and abrasive cleaners, such as those used for toilet bowls, green Scotch-Brite heavy duty scrub sponges, Scrubbing Bubbles Bathroom Cleaner and Lysol Basin Tub, Soft Scrub, and Tile Cleaner. Avoid products that state on the label that they remove tarnish and rust, and those containing hydrofluoric, hydrochloric and/or phosphoric acids and caustic agents. Avoid harsh abrasives or polishes Avoid bleach-based cleaners Best Regards, Rosanna

Hi, sttarks. Thank you for your question. The Delta 9959T-AR-DST faucet touch function can be manually bypassed. To do this, first turn the water off at your water supply for your faucet. Under the sink, you will see the solenoid assembly with two water lines coming from the bottom and top of the solenoid. These are connected with two blue clips. Remove the two clips to remove the whole solenoid assembly. Connect the two lines together and secure this connection with one of the blue clips. Pull the connection to make sure the connection is tightly secured. Please contact us back if you should need further assistance. Best Regards, Rosanna

Hi, Ricardo. Thank you for your question. I am sorry to hear that you are experiencing erratic issues with your Delta faucet. We do recommend to wipe the faucet down after each use. Here is a list of do's and don't's for touch faucets: Must Do or significant degradation in touch responsiveness is likely: • Use the stabilization plate provided with the faucet (it is an insulator, which helps the faucet recognize the signal better) • Use all other insulators provided with the faucet (exception: spout insulator cannot be used with thin-mounting surfaces) • Make sure the metal mounting shank is at least ½” from the sink bowl or other metal objects (e.g., sink clips, metallic hoses, house wiring, etc.) • Separate the black wire with the stereo plug as much as possible from the other wires Should Do or some degradation in touch responsiveness is possible: • Place battery pack as close to the floor of cabinet as possible (flat on cabinet floor for best results) • Maintain a 2” clearance around battery pack (excluding cabinet itself) • Route faucet wires away from all hoses and supply lines to prevent contact • Avoid placing household objects (sponges, soaps, decorations, etc.) within 2” of faucet Must NOT Do or significant degradation in touch responsiveness is likely: • Modify the supplied parts (exception is stabilizer plate—it may be cut for non-standard hole spacing) • Use power adaptor in lieu of supplied battery pack • Bundle wires together Should NOT Do or some degradation in touch responsiveness is possible: • **Connect faucet or battery pack to an earth ground (e.g., house wiring or water lines) • Install faucet on metal counter top (metal sinks are fine) • Install faucet within 4” of a metal backsplash behind faucet • Wrap wires around drains If you should need further assistance, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com. Best Regards, Rosanna

Hi A-Aron, Thank you for your question. This port is used by our engineers for diagnostic purposes. Best regards, Jon

We manufacture Delta faucets in our plant facilities in Greensburg, Indiana; Jackson, Tennessee; London, Ontario, CA (and Panyu, China). As a global manufacturer, we also source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured or assembled, they are built to Delta Faucet Company’s exacting specifications and are quality tested to ensure long-lasting performance. The location information on the back of the box will tell you where your specific faucet model was made.