Leland®
View Full Leland® Kitchen Collection

Single Handle Pull-Down Kitchen Faucet in Chrome

Model#: 978-DST
Add to Favorites
Find local Delta® installers.
Leland®
View Full Leland® Kitchen Collection
Single Handle Pull-Down Kitchen Faucet in Chrome
Model#: 978-DST
List Price: $55600
Add to Favorites
Find local Delta® installers.
PRODUCT FEATURES
Delta® MagnaTite® Docking uses a powerful integrated magnet to pull your faucet spray wand precisely into place and hold it there so it stays docked when not in use. Delta® faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. Kitchen faucets with Touch-Clean® Spray Holes allow you to easily wipe away calcium and lime build-up with the touch of a finger. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. *Industry standard is based on ASME A112.18.1 of 500,000 cycles.
  • MagnaTite® Docking uses a powerful integrated magnet to snap your faucet spray wand precisely into place and hold it there so it stays docked when not in use and doesn’t droop over time
  • Soft, rubber Touch-Clean spray holes allow you to easily wipe away calcium and lime build-up with the touch of a finger
  • DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
  • Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines
  • 2 or 3-hole 4" installation
  • ADA Compliant
  • The high-arc, gooseneck design swivels 360 degrees with a 20-in. retractable hose for added convenience during everyday kitchen tasks
Special Information
Warning Image
California Prop 65 WARNING
Technology and Special Features
ADA Compliant
Touch-Clean®
No-Lead Compliant
Water-Efficient
Diamond Seal® Technology
MagnaTite® Docking
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Product Support, Repair Parts & Technical Specifications
View Technical Specifications
View Maintenance & Installation Sheet
View Parts & Accessories Diagram
Register Product
Resources
Design Files
Installation Information
2-hole 4" installation
2-hole 4" installation
Connection Type :
3/8" compression fittings
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
14-1/4
Valve Type:
Ceramic Disc

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
Rated 5 out of 5 by from Delta faucets!! I just had this installed in my kitchen with a matching island sink faucet and I love them! Delta is the best!
Date published: 2026-05-05
Rated 4 out of 5 by from Replacement Replaced same model that was 16 years old. Noticed some changes. Water comes out noisier. Replaced braided stainless steel hose with a rubber one. I hope it holds up as well as the previous one. The brushed nickel finish looks almost like stainless steel.
Date published: 2026-04-17
Rated 4 out of 5 by from Easy to use and high quality. Plumber installing had to go get an extra part ($). The only thing we don't love is that the extended nozzle needs a real push to get back in the faucet.
Date published: 2026-03-29
Rated 5 out of 5 by from Great features I love my new faucet. Hands down, it makes daily cooking easy and was easy to install. I really appreciate the customer service I received with this product. Thank you
Date published: 2026-02-21
Rated 3 out of 5 by from Not Satisfied and it's a Waste of Money. The faucet had a modern design. Unfortunately, when I installed the faucet I was surprised the way the Standard Flow of water was very "LOW". I do not know what's wrong with my new faucet.
Date published: 2026-01-25
Rated 2 out of 5 by from Ok for a while, but doesn't last Started out ok, but over time it didn't age well. The cartridge needs replaced repeatedly and only lasts maybe a year before it starts leaking again. The finish (as you can see in the photos) didn't last at all on the venetian bronze finish. The connection to the pull down sprayer is rusting.
Date published: 2026-01-08
Rated 2 out of 5 by from Worked well for a while, but didn't last I've owned this faucet for 13 years and at first it worked well. Magnetic docking of pull-down spray is a nice feature, but the magnet has rusted over time. The valves don't last very long. I've probably installed 4 or 5 valve body's in this. It fails the same way every time, when it starts leaking when in the down/off position. You have to rotate the handle in a circle left or right to get it find the sweet spot where it actually shuts off. The finish on both the handle and the top of the spout is basically gone. It didn't last more than 5 years in daily use. At this point I'm sick of replacing valves and will likely replace the entire faucet, unless Delta will "warranty" it.
Date published: 2026-01-07
Rated 1 out of 5 by from Doesn’t last long Needed a new cartridge after a year. Delta said they would only supply 1 for the life of the faucet. A year later the new one is failing and the screw to remove the handle to replace the $50 cartridge has seized so the faucet need to be replaced. Garbage.
Date published: 2025-12-14
  • y_2026, m_6, d_16, h_13
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.46
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_555
  • loc_en_US, sid_978-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 6ms
  • reviews, product
Q&A

Model 978-DST. Cannot remove the bonnet to replace the cartridge..Used suggested 1 5/16 socket. Cannot break it loose from the base. Some help please. Thanks.

Asked by: George
Hello, I apologize for the issue you are experiencing and I am happy to help you. We recommend wrapping a cloth soaked in a 50/50 solution of white vinegar and water around the bonnet. This will help break up the mineral buildup in the threads. If additional assistance is required you may wish to contact a plumber. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Timothy
Date published: 2025-08-01

faucet handle spins all the way around

I attempted to adjust this faucet handle as it was causing the faucet to leak somewhat. when i removed the set screw holding the faucet on and then retightened the scew the faucet handle now feels loose and spins 360 degrees. im looking to get this repaired but im not sure if i need a new handle or if it is the cartridge the handle goes onto that needs to be replaced.
Asked by: jasimek
Hi jasimek, Thank you for your question. It sounds like either the set screw is not tight enough, or the screw is not in contact with the stem portion of the dst cartridge. Make sure the cartridge is seated properly, and that the bonnet and sleeve assembly are tightened correctly. The handle set screw should attach to the cartridge stem on the flat portion of the stem preventing the handle from spinning. I have attached a link to the parts breakdown for the model 978-DST to help you with your repair. Thanks, Dave http://www.deltafaucet.com/customersupport/documentation/978-dst.html?document=pd&fromDetailArea=kitchen&documentIndex=0#flashWrapper
Answered by: DeltaFaucet2
Date published: 2024-03-28

I know the pull-down sprayer will cover 360 degrees; but, does the spout rotate?

Asked by: Bill
Hi Bill, Thank you for your question. The spout itself will rotate 360 degrees. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

I have a Delta 978-DST kitchen faucet and the handle is getting worn out.  I don't have the small allen wrench it appears I would need to replace the worn parts in the handle.  Do you have this tool?

Asked by: Robato
Hello Robato, Thank you for your question. On the lever handle, of your Delta Leland Pull-Down Kitchen 978-DST model, you should find a small hex screw that can be loosened with a 1/8" Allen wrench. Allen wrenches can be purchase from any of your local plumbing and hardware stores. Please feel free to call, email, or message us on social if you have any further questions. Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet
Answered by: Tanya
Date published: 2024-03-28

Really 2.5" min clearance to backsplash (4" high)? Want to replace a Moen Aberdeen with your Leland 978-DST. The Moen fits fine with 2" clearance from faucet midpoint to backsplash. Why can't I use 978-DST with same 2" center to backsplash clearance?

Asked by: KevinK
Hi, KevinK! Thank you for your question. We recommend the 2.5" clearance to backsplash for the 978-DST so that everything fits on the top of the sink as well as underneath the sink. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

what size garden hose aerator adapter should i buy?   i need to hook an aquarium garden hose to the faucet head.  13/16 does not fit.  its too small.

Asked by: tanya101
Hello tanya101! Thank you for your question. We only offer one aerator adapter, RP51505. This adapter converts 21.5X 1-6 g metric thread to 55/64”-27 standard thread. Your aerator, RP50815 has M21.5 threads, however care should be taken as we have not tested and do not recommend using this adapter with the pullout or pulldown spray wands. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP51505 Best regards, Edward
Answered by: DeltaFaucet234
Date published: 2024-03-28

how to install a 978rbdst kit tony

Asked by: tony
Thank you for your question, Tony! Here is a link to the Installation Instructions for this model: https://media.deltafaucet.com/MandI/101898%20Rev%20A.pdf Best regards, Jon
Answered by: Delta Faucet
Date published: 2024-03-28

The magnetic head and spray hose.  Is this supposed to retract completely on its own?  New installation, everything ok. Hose retracts to plastic spray head. I have to push head into faucet to seal.  Thank you.

Asked by: Icecap8
Thank you for your question, Icecap8! The Delta MagnaTite Technology is only meant to help guide and keep your wand docked when not in use. The hose weight will also help this retract when not in use. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28
  • y_2026, m_6, d_16, h_13CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.46
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_619
  • loc_en_US, sid_978-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 6ms
  • questions, product
PART LIST

PART LIST

1 2 >
Image-Master-RP44651

Delta®

Delta® Soap / Lotion Dispenser

List Price: $80.05 - $113.30

RP44651

Image-RP37490

Delta®

Delta® Stabilization Plate

List Price: $29.40
Online Price: $23.52
Free Ground Shipping All Orders $49+

RP37490

3.20 5
Image-Master-RP50813

Delta®

Delta® Soap / Lotion Dispenser

List Price: $62.85 - $97.00
Free Ground Shipping All Orders $49+

RP50813

Image-RP63265

Delta®

Delta® Adapter - Slip Joint

List Price: $58.55
Online Price: $46.84
Free Ground Shipping All Orders $49+

RP63265

Image-RP63264

Delta®

Delta® Adapter Kit - PEX Compression (10)

List Price: $92.90
Online Price: $74.32
Free Ground Shipping All Orders $49+

RP63264

Image-Master-RP54537

Leland®

Leland® Spout Assembly

List Price: $123.80 - $247.15
Free Ground Shipping All Orders $49+

RP54537

Image-RP63263

Delta®

Delta® Adapter Kit - PEX Compression (4)

List Price: $45.35
Online Price: $36.28
Free Ground Shipping All Orders $49+

RP63263

3.67 3
Image-RP21945

Delta®

Delta® Soap / Lotion Dispenser - Nut

List Price: $8.30
Online Price: $6.64
Free Ground Shipping All Orders $49+

RP21945

4.00 2
Image-Master-RP46748CZ

Leland®

Leland® Handle and Button

List Price: $59.95 - $110.90
Free Ground Shipping All Orders $49+

RP46748CZ

Image-RP80977

Delta®

Delta® Magnet Replacement Kit

List Price: $69.80
Online Price: $55.84
Free Ground Shipping All Orders $49+

RP80977

3.02 54
Image-RP60923

Delta®

Delta® Friction Spacers & Clip - Kitchen

List Price: $24.35
Online Price: $19.48
Free Ground Shipping All Orders $49+

RP60923

5.00 2
Image-Master-RP51480

Leland®

Leland® Spray Assembly - Pull-Down Kitchen

List Price: $123.10 - $296.00
Free Ground Shipping All Orders $49+

RP51480

Image-RP47030

Leland®

Leland® Bathroom Wrench

List Price: $10.00
Online Price: $8.00
Free Ground Shipping All Orders $49+

RP47030

1.00 2
Image-RP50390

Delta®

Delta® Quick Connect Hose & Clip - 54" - Pull-Up / Pull-Down DST Faucets

List Price: $108.65
Online Price: $86.92
Free Ground Shipping All Orders $49+

RP50390

3.96 27
Image-RP51503

Delta®

Delta® Bonnet Nut w/ Valve Seal

List Price: $35.10
Online Price: $28.08
Free Ground Shipping All Orders $49+

RP51503

5.00 3
Image-Master-RP51481

Leland®

Leland® Valve Sleeve Assembly

List Price: $67.30 - $112.30
Free Ground Shipping All Orders $49+

RP51481

* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.