Single Handle Pull-Down Kitchen Faucet in Chrome
Model#:
978-DST
Image Thumbnail, click to view zoomed product image
PRODUCT FEATURES
Delta® MagnaTite® Docking uses a powerful integrated magnet to pull your faucet spray wand precisely into place and hold it there so it stays docked when not in use. Delta® faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. Kitchen faucets with Touch-Clean® Spray Holes allow you to easily wipe away calcium and lime build-up with the touch of a finger. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. *Industry standard is based on ASME A112.18.1 of 500,000 cycles.
- FULL-RANGE, FLEXIBLE REACH: High-arc kitchen faucet swivels 360° with a 20-inch retractable hose for easier cleaning, filling and rinsing around the sink
- MAGNETIC DOCKING SPRAYER: MagnaTite® Docking uses a powerful magnet to keep your pull-down kitchen faucet sprayer securely in place and prevent drooping over time
- LEAD-FREE COMPLIANT: Not all faucets are certified to necessary safety standards. Delta goes above and beyond with product testing and quality to ensure each faucet meets plumbing safety standards, including NSF/ANSI 61 and 372
- LASTS 2X LONGER: Patented DIAMOND Seal® Technology reduces leak points and lasts 2X as long as the industry standard for long-lasting, leak-free performance (Industry standard based on ASME A112.18.1 of 500,000 cycles)
- LEAK-FREE SUPPLY LINES YOU CAN TRUST: Delta® PEX supply lines are tested to withstand 20% more extreme pressure for 1,000 hours without leaking—far beyond plumbing standards
- EASY INSTALLATION OPTIONS: This kitchen sink faucet fits 2 or 3-hole configurations and includes integrated InnoFlex® PEX supply lines for faster installation
- CORROSION-RESISTANT FINISH: Brilliance® finishes are engineered for durability and tested for corrosion resistance to at least 2 times industry standards
- QUICK-CLEAN SPRAY HOLES: Touch-Clean® spray holes let you easily wipe away calcium and lime buildup with the touch of a finger
- ADA-COMPLIANT DESIGN: ADA-compliant lever handle makes this kitchen faucet easy to adjust water temperature and volume
- LIFETIME LIMITED WARRANTY: Designed for lasting reliability and backed by Delta Faucet Company's Lifetime Limited Warranty
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Technology and Special Features
ADA Compliant
ADA Compliant
Some people, and some local codes, require fixtures that are compliant with the Americans with Disabilities Act. If someone may visit who has special needs, or if you believe future buyers might appreciate this feature, Delta offers a range of compliant fixtures.
No-Lead Compliant
No-Lead Compliant
Tested and certified to NSF/ANSI Standard 61, which sets the criteria for product safety. The lined waterways in Delta® faucets help prevent leaching of metals.
Water-Efficient
Water-Efficient
CalgreenCert Tooltip information here...
Diamond Seal® Technology
Diamond Seal® Technology
DIAMOND™ Seal Technology is Delta’s revolutionary new water delivery system. An internal contact surface made up of tiny diamonds makes the valve leak-free and extraordinarily durable. It also keeps water free of contact with potential metal contaminants.
MagnaTite® Docking
MagnaTite® Docking
The pull-down spray head utilizes a powerful magnet which keeps the wand securely in place when not in use. No more dangling!
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Resources
Installation Information
2-hole 4" installation
Connection Type :
3/8" compression fittings
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
14-1/4
Valve Type:
Ceramic Disc
INSTALLATION SUPPORT
Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.
REVIEWS
Rated 5 out of
5
by
leland faucets from
Delta faucets!!
I just had this installed in my kitchen with a matching island sink faucet and I love them! Delta is the best!
Date published: 2026-05-05
Rated 4 out of
5
by
John46 from
Replacement
Replaced same model that was 16 years old. Noticed some changes. Water comes out noisier. Replaced braided stainless steel hose with a rubber one. I hope it holds up as well as the previous one. The brushed nickel finish looks almost like stainless steel.
Date published: 2026-04-17
Rated 4 out of
5
by
KS Kitchen from
Easy to use and high quality. Plumber installing had to go get an extra part ($). The only thing we don't love is that the extended nozzle needs a real push to get back in the faucet.
Date published: 2026-03-29
Rated 5 out of
5
by
brax26 from
Great features
I love my new faucet. Hands down, it makes daily cooking easy and was easy to install. I really appreciate the customer service I received with this product. Thank you
Date published: 2026-02-21
Rated 3 out of
5
by
Amoy from
Not Satisfied and it's a Waste of Money.
The faucet had a modern design. Unfortunately, when I installed the faucet I was surprised the way the Standard Flow of water was very "LOW". I do not know what's wrong with my new faucet.
Date published: 2026-01-25
Rated 2 out of
5
by
Eric F from
Ok for a while, but doesn't last
Started out ok, but over time it didn't age well. The cartridge needs replaced repeatedly and only lasts maybe a year before it starts leaking again. The finish (as you can see in the photos) didn't last at all on the venetian bronze finish. The connection to the pull down sprayer is rusting.
Date published: 2026-01-08
Rated 2 out of
5
by
Eric Finn from
Worked well for a while, but didn't last
I've owned this faucet for 13 years and at first it worked well. Magnetic docking of pull-down spray is a nice feature, but the magnet has rusted over time. The valves don't last very long. I've probably installed 4 or 5 valve body's in this. It fails the same way every time, when it starts leaking when in the down/off position. You have to rotate the handle in a circle left or right to get it find the sweet spot where it actually shuts off. The finish on both the handle and the top of the spout is basically gone. It didn't last more than 5 years in daily use. At this point I'm sick of replacing valves and will likely replace the entire faucet, unless Delta will "warranty" it.
Date published: 2026-01-07
Rated 1 out of
5
by
Rick67 from
Doesn’t last long
Needed a new cartridge after a year. Delta said they would only supply 1 for the life of the faucet. A year later the new one is failing and the screw to remove the handle to replace the $50 cartridge has seized so the faucet need to be replaced. Garbage.
Date published: 2025-12-14
Q&A
the bonnet nut on my 978-ss-dst does not remove easily as the videos say. what can I do to remove it.
Hi, Doctor B!
Thank you for your question. The bonnet nut for the Delta 978-SS-DST faucet can be removed by a pair of adjustable pliers and a strap wrench for easier removal. If there is significant mineral buildup, a 50/50 solution of white vinegar and water can be applied to help break up any deposits inside the bonnet nut.
Best Regards,
Rosanna
Date published: 2024-03-28
I intend to take this faucet to brazil.
water pressure is from gravity of storage tank on the roof of houses. May question is: the aerator which is design to reduce pressure fow of water in USA will not restrict too much the flow coming from gavity?
perhapps I drill the aerator to give more flow?
Hi Cesar, Thank you for your question. The model 9178-AR-DST requires a working pressure of 20 PSI. Each foot of elevation that your storage tank is about ground level will give approximately .433 PSI. For example 100' of elevation will result in 34.4 psi.
Thanks,
Dave
Date published: 2024-03-28
HOW HIGH IS TALLEST PART OF FAUCET?
Dan, thank you for your question! The highest part of Delta Faucet model #978-WE-DST is 14 1/4".
Date published: 2024-03-28
When searching this model on the online sites they do not indicate the sprayshield technology - when was it introduced on this model and how do ensure I get one with this feature if I place an order with them? Thanks
Hello, Cloogs. Thank you for your question! The ShieldSpray version began shipping in December of 2017. Please check with the vendor to ensure that they are offering the version with ShieldSpray. The product description should indicate if the faucet will have this feature.
Best regards, Jon
Date published: 2024-03-28
Which beverage faucet would look best with the Leland faucet 978-dst?
Hi Sue, Thank you for your question. Our model 1914-AR-DST Traditional beverage faucet will coordinate best with your model 978-ARWE-DST Leland faucet.
http://www.deltafaucet.com/kitchen/details/1914-ar-dst.html
Thanks,
Dave
Date published: 2024-03-28
Stainless steel vs arctic finish
We have 2 year old whirlpool appliances and will be installing a countertop with Solera SR305 sink under counter mount stainless steel sink. Your opinion please on the arctic or stainless steel finish for delta leader faucet 19978 or 9178 This is a one shot deal so I need to get it right. Thanks
Hi Diane, Thank you for your question. There is a slight difference between the Delta Faucet Stainless Steel finish and the Delta Faucet Artic Stainless finish. Stainless Steel has a gold tone to it and is mostly used in the bath. Artic Stainless has a blue tint to it and more closely matches stainless steel appliances out in the market today. It is only used in the kitchen.
Thanks,
Dave
Date published: 2024-03-28
Hello - I have a Single Handle Pull-Down Kitchen Faucet with ShieldSpray® Technology Leland® - Model#: 9178-AR-DST. Can this be mounted so the handle is facing the front versus a side mount so that the handle is over the sink? Thanks
Hello Jane,
Thank you for your question. We recommend installing the Delta Leland Pull-Down Kitchen 9178-AR-DST faucet with the handle on the right. You may install it with the handle on the front or left side, but the temperature adjustment will be opposite of the standard operation for single handle faucets.
You can compensate for this by swapping the hot and cold supply lines under the sink. However, the red/blue button will no longer indicate the correct temperature.
Best regards,
Tanya
Date published: 2024-03-28
what is the hole size i need to drill for a delta faucet 9178 dts
Hi, Peter J!
Thank you for your question. The hole size to drill for the Delta 9178-AR-DST is 1 3/8" (35 mm). Here is a link to show further measurements for the faucet:
https://media.deltafaucet.com/SpecSheet/DSP-K-19978-SD-DST%20Rev%20D.pdf
Best Regards,
Rosanna
Date published: 2024-03-28
We’ve had our 9178-DST for 5 months & constantly have water puddles from our hands on our Quartz countertop. Constantly drying around the faucet. Can we move this so the handle is in the front instead of the right side and has anyone else done this.
Thank you for your question, Shari! This Delta model can be installed with the handle in front if desired. You will simply need a helper to hold the faucet in place while you loosen the mounting nut below the counter just enough to reposition the faucet. You may also want to consider upgrading to the Touch20 version of this model which will allow you turn the faucet on or off with a quick flick of the wrist.
https://www.deltafaucet.com/kitchen/product/9178T-DST
Best regards, Edward
Date published: 2024-03-28
Does the spray function continue without requiring continual hold of the button?
Hi Jen,
Thank you for your question. Delta Faucet model # 9978-AR-DST does not require you to hold the button down to change from spray to stream. It will stay in the spray mode until you switch it back to stream even after the faucet is turned off.
Date published: 2024-03-28
What escutcheon plate can be purchased for a 978-AR-DST, to go from a four hole to a two hole
Hi C, Thank you for your question. The 978-AR-DST offers an escutheon to go from a 2 hole to a 4 hole installation but unfortunately does not offer a 2 hole escutcheon. The spout and valve are 2 separate pieces.
Thanks,
Dave
Date published: 2024-03-28
Where can I buy faucet parts for Delta 9978-ar-dst
Thank you for your question, Sharon! On the model's web page, there is a Where to Buy tab. Under this tab, you can find local and online retailers who may carry parts for model 9978-AR-DST. However, we can't guarantee that a specific retailer would have an item in stock. If you need further assistance, feel free to contact us directly.
Best Regards, Benjamin
Date published: 2024-03-28
Is there a visible difference between Artic Stainless and Spotshield Stainless finishes? Is there a difference in care or durability?
Hello,
Thank you for your question!
SpotShield stainless will show spots a less than arctic stainless. There will be a difference if there are two products next to each other in the different finishes.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2025-09-08
what is the purpose of the red plastic slide switch at the top of the valve assembly?
Hi, Jerry!
Thank you for your question. The switch on the valve assembly is a handle limit stop. Position 1, to the left, allows full handle motion (the full range between “all cold” to “all hot”). The faucet is set in position 1 in the factory. Position 2, to the right, allows half of the normal handle motion (“all cold” to “mixed hot/cold”).
The handle limit stop can be adjusted by the homeowner once the faucet is installed. Setting the handle limit stop in position 2 may help to prevent scalding because it limits the amount of hot water in the mix; however, this handle limit stop will not always prevent scalding because it does not compensate for incoming pressure or sudden water temperature changes.
To change positions of the handle limit stop: remove the handle; move the valve stem to the all cold position so the water is on; change the position of the handle limit stop; turn off the water; reinstall the handle.
Best Regards,
Rosanna
Date published: 2024-03-28
Regarding handle placement and the meaning of 'front' If I'm standing at the sink, is front closer to me and under the spout? Installing on an island where clearance is not a factor, can the handle be in the back, opposite the sink side?
Thank you for your question, LHLIN! The handle placement in "front" would refer to being under the spout and closest to the user. For an installation where clearance does not matter, you can install this model with the handle facing to the back since the spout swivels 360 degrees.
Best regards, Edward
Date published: 2024-03-28
installation on a mica countertop w/farm sink
How far back from a farm sink would be a safe installation for this faucet on brand new mica counter tops?
new kitchen,
Thank you for your question. The spout extends 9 1/4" from the center of the faucet to the center of the aerator and we advise to allow 2 1/2" clearance to the backsplash. However, it is up to you to decide where to install the faucet in your installation. Please refer to the Technical Specifications for more measurements.
https://media.deltafaucet.com/SpecSheet/DSP-K-19978-SD-DST%20Rev%20D.pdf
Best regards,
Jon
Date published: 2024-03-28
Does the leland arctic stainless 978-ARWE-DST come with a soap dispenser?
Thank you for your question, Philippa! Model 978-ARWE-DST does not include a soap dispenser. The Leland dispenser can be purchased separately as part number RP50813AR.
https://www.deltafaucet.com/kitchen/product/RP50813AR
Best regards, Edward
Date published: 2024-03-28
Does this have to be mounted 4" apart or is 5 or 6" possible?
Dear Mary,
Thank you for your question. The Delta Leland Kitchen faucet 978-WE-DST model has the 4" installation requirement for the outstanding reach of the 59" hose assembly. Installing the the handle and faucet 5" or 6" apart would effect the reach of the hose assembly.
Best regards,
Tanya
Date published: 2019-02-24
We will have Frigidaire's Gallery series stainless steel appliances in our kitchen. Will Delta's Arctic Stainless or Spotshield Stainless finish match better?
Hi Agolin,
Thank you for your question. There is a slight difference between the Delta Faucet SpotShield Stainless Steel finish and the Arctic Stainless finish. The SpotShield Stainless Steel has a spot-resistant neutral, low-gloss finish. The Arctic Stainless has a blue tint to it and more closely matches stainless steel appliances out in the market today. It is only used in the kitchen.
Best regards,
Tanya
Date published: 2024-03-28
Our faucet is almost 10 years old, and it is hard to keep the faucet from dripping. We have to try a few times and get the on/off mechanism in just the right place for the dripping to stop. What kind of repair might this faucet need? Thanks in advance.
Hello,
Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time.
Best Regards,
Tim
Digital Communications Specialist
Date published: 2026-01-19
Venetian Bronze Color
Does the Venetian Bronze faucet coordinate with oil rubbed bronze cabinet hardware?
Hello Sophie,
Thanks for your question!
It's always a good idea to take the cabinet hardware and other accessories to a Delta Faucet showroom to see if your chosen hardware will match the faucet and vice versa. The color of the hardware will ultimately depend on the manufacturer, so we couldn't say if it would definitely match. However, Venetian Bronze would probably match an oil rubbed bronze finish, but whether or not it looks good together is ultimately up to you.
I hope this helps!
Date published: 2024-03-28
what is difference between 9978 model and 978 model?
I need the Leland single hand pull down faucet (2 holes) in the brilliant stainless. I've seen both the 978 model as well as 9978...are these different?
Hello WWA,
Thank you for your question!
The 9978-DST is a bar/prep faucet generally used in smaller side sinks. As a result, the faucet itself is much smaller than the 978-DST, which is the regular kitchen sink faucet. You can take a look at each faucet's Technical Specifications for further details.
I hope this helps!
Date published: 2024-03-28
Does this faucet have any lead in it?
Hi, Thank you for contacting us.
We apologize for any inconvenience. We are more than happy to help you.
Delta Faucet Company products that carry the Prop 65 label pictured above include components made with brass, which contains small but detectable amounts of lead—an element included on the Prop 65 chemical list. Brass has a decades-long history of successful use in plumbing applications.
Even though a product may be found to contain a Proposition 65-listed chemical, it does not mean that use of the product will cause cancer, birth defects or other reproductive harm. Nor does it mean that a product is unsafe. All Delta Faucet Company products meet or exceed the requirements of applicable product performance and safety industry standards, as well as the federal Safe Drinking Water Act. We are confident there is no health hazard associated with the installation, use or removal of any of our products.
With DST models, the water does not come in contact with the outer shell of the faucet.
Please contact us at 1-800-345-3358 if you have any further concerns. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday.
Best Regards,
Bethany
Date published: 2024-03-28
I bought this through amazon and the aerator is 1.8 gpm, we don't have any local code restrictions and I would like to find a 2.2 gpm aerator that would fit this . Someone (from delta) recommended Delta RP53998 2.2 Gpm Aerator, Chrome. This was to big
Thank you for your question, Sharon! I apologize for the confusion with this part and we are happy to help. The aerator RP53998 is not meant for the new Spotshield wand that now comes with this model. We do offer a 2.2 gpm aerator with the correct thread size for your wand as part number RP46827.
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP46827
Best regards, Edward
Date published: 2024-03-28
We are buying Beverage Faucet 1914-SS-DST and a Leland 9178-nn-DST for the same sink. It comes in -SP- Spotless and -AR-Arctic. Which looks most like the -SS- beverage faucet? We have brushed nickel everywhere else.
Thank you for your question, DavidB! SpotShield Stainless will match the Stainless Steel finish. Artcic Stainless features a cooler color temperature than the warmer Stainless Steel.
Best regards, Jon
Date published: 2024-03-28
I read most of the answers to the questions. If the handle assembly is metal, what material is inside ? Is this product considered a middle quality
or is this still low - end quality?
How much price range do I set to look for a middle quality for single handle pull down/pull out kitchen faucet?
How often do I change the washer?
I didn't buy this yet.
I am checking your homepage to see which one I would like to buy.
Hello Haru Chan,
Thank you for your questions. The internal cartridge for this faucet is manufactured with plastic, but it is a high quality of plastic. The rest of the material this Delta faucet is made with is also of high quality material.
Best Regards,
Courtney
Date published: 2016-10-31
Can I get this faucet before Dec 15th?
I have 2 of these faucets on order but I'm trying to get my house finished before Christmas. Is there anyway I can get these early. Thanks
Hi Desperately seeking faucet, Thank you for your question. Unfortunately since the model 9678-AR-DST is a new product launch the product is not scheduled to ship before 12/15/2014. There is no way to get the product earlier.
Thanks,
Dave
Date published: 2024-03-28
everywhere online sells this for $179.But on your site & at my local K&B stores it is priced at $385.20? That's a HUGE difference in price! Are there two versions of this product out there? Does the cheaper price mean lesser quality?
Hi Lefty,
We appreciate your interest in Delta faucets. All Delta faucets feature the same quality parts, materials, and workmanship, no matter what kind of dealer sells them. The website shows the product at list price. Dealers purchase the product in bulk for selling it readily to consumers, so they are able to offer a much lower price. However, the quality of all Delta faucets are the same.
Best regards,
Tanya
Date published: 2024-03-28
can i purchase the pull down bar without the faucet
Hi Rossi, Thank you for your question!
The Spout body area can not be purchased separately from the valve control area.
Best regards,
Brandis
Date published: 2024-03-28
How can I clean inside the spray? Once a contractor used a special very small wrench to do it. Thanks
Hi, LiliChi!
Thank you for your question. The Delta 9178-SP-DST faucet does have a sprayer assembly with a removable aerator that can be removed with an aerator wrench. The kit is RP50815. Here is a link to this aerator and aerator wrench kit:
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP50815
Best Regards,
Rosanna
Date published: 2024-03-28
PART LIST
PART LIST
View Product
![Image-RP37490]()
Delta®
Delta® Stabilization Plate
List Price:
$29.40
Online Price:
$23.52
Free Ground Shipping All Orders $49+
RP37490
3.20
5
View Product
![Image-Master-RP50813]()
Delta®
Delta® Soap / Lotion Dispenser
List Price:
$62.85
-
$97.00
Free Ground Shipping All Orders $49+
RP50813
View Product
![Image-RP63265]()
Delta®
Delta® Adapter - Slip Joint
List Price:
$58.55
Online Price:
$46.84
Free Ground Shipping All Orders $49+
RP63265
View Product
![Image-Master-RP54537]()
Leland®
Leland® Spout Assembly
List Price:
$123.80
-
$247.15
Free Ground Shipping All Orders $49+
RP54537
View Product
![Image-RP63264]()
Delta®
Delta® Adapter Kit - PEX Compression (10)
List Price:
$92.90
Online Price:
$74.32
Free Ground Shipping All Orders $49+
RP63264
View Product
![Image-RP21945]()
Delta®
Delta® Soap / Lotion Dispenser - Nut
List Price:
$8.30
Online Price:
$6.64
Free Ground Shipping All Orders $49+
RP21945
4.00
2
View Product
![Image-RP63263]()
Delta®
Delta® Adapter Kit - PEX Compression (4)
List Price:
$45.35
Online Price:
$36.28
Free Ground Shipping All Orders $49+
RP63263
3.67
3
View Product
![Image-RP80977]()
Delta®
Delta® Magnet Replacement Kit
List Price:
$69.80
Online Price:
$55.84
Free Ground Shipping All Orders $49+
RP80977
3.02
54
View Product
![Image-RP60923]()
Delta®
Delta® Friction Spacers & Clip - Kitchen
List Price:
$24.35
Online Price:
$19.48
Free Ground Shipping All Orders $49+
RP60923
5.00
2
View Product
![Image-Master-RP51480]()
Leland®
Leland® Spray Assembly - Pull-Down Kitchen
List Price:
$123.10
-
$296.00
Free Ground Shipping All Orders $49+
RP51480
View Product
![Image-RP50390]()
Delta®
Delta® Quick Connect Hose & Clip - 54" - Pull-Up / Pull-Down DST Faucets
List Price:
$108.65
Online Price:
$86.92
Free Ground Shipping All Orders $49+
RP50390
3.96
27
View Product
![Image-RP47030]()
Leland®
Leland® Bathroom Wrench
List Price:
$10.00
Online Price:
$8.00
Free Ground Shipping All Orders $49+
RP47030
1.00
2
View Product
![Image-RP51503]()
Delta®
Delta® Bonnet Nut w/ Valve Seal
List Price:
$35.10
Online Price:
$28.08
Free Ground Shipping All Orders $49+
RP51503
5.00
3
View Product
![Image-Master-RP51481]()
Leland®
Leland® Valve Sleeve Assembly
List Price:
$67.30
-
$112.30
Free Ground Shipping All Orders $49+
RP51481
View Product
![Image-RP40650]()
Michael Graves™
Michael Graves™ Set Screw
List Price:
$7.15
Online Price:
$5.72
Free Ground Shipping All Orders $49+
RP40650
5.00
3
FEATURED ACCESSORIES
View Product
![Image-Master-RP50813]()
Delta®
Delta® Soap / Lotion Dispenser
List Price:
$62.85
-
$97.00
Free Ground Shipping All Orders $49+
RP50813
View Product
![Image-Master-72010]()
Delta®
Delta® Kitchen Sink Flange & Strainer
List Price:
$87.60
-
$218.00
Standard Finishes
72010
View Product
![Image-Master-72030]()
Delta®
Delta® Kitchen Disposal and Flange Stopper
List Price:
$109.45
-
$179.60
Standard Finishes
72030
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.