Leland®
View Full Leland® Kitchen Collection

Single Handle Pull-Down Kitchen Faucet with Soap Dispenser in Stainless

Model#: 978-SSSD-DST
Add to Favorites
Find local Delta® installers.
Leland®
View Full Leland® Kitchen Collection
Single Handle Pull-Down Kitchen Faucet with Soap Dispenser in Stainless
Model#: 978-SSSD-DST
List Price: $58500
Add to Favorites
Find local Delta® installers.
PRODUCT FEATURES
Delta® MagnaTite® Docking uses a powerful integrated magnet to pull your faucet spray wand precisely into place and hold it there so it stays docked when not in use. Delta® faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. Kitchen faucets with Touch-Clean® Spray Holes allow you to easily wipe away calcium and lime build-up with the touch of a finger. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. *Industry standard is based on ASME A112.18.1 of 500,000 cycles.
  • MagnaTite® Docking uses a powerful integrated magnet to snap your faucet spray wand precisely into place and hold it there so it stays docked when not in use and doesn’t droop over time
  • Soft, rubber Touch-Clean spray holes allow you to easily wipe away calcium and lime build-up with the touch of a finger
  • DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
  • Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines
  • Includes coordinating soap dispenser
  • 2 or 3-hole 4" installation
  • ADA Compliant
  • The high-arc, gooseneck design swivels 360 degrees with a 20-in. retractable hose for added convenience during everyday kitchen tasks
Special Information
Warning Image
California Prop 65 WARNING
Technology and Special Features
ADA Compliant
No-Lead Compliant
Brilliance® Finish
Water-Efficient
Soap Dispenser
Diamond Seal® Technology
MagnaTite® Docking
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Product Support, Repair Parts & Technical Specifications
View Technical Specifications
View Maintenance & Installation Sheet
View Parts & Accessories Diagram
Register Product
Resources
Design Files
Installation Information
2 or 3-hole 4" installation
2 or 3-hole 4" installation
Connection Type :
3/8" compression fittings
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
14-1/4
Valve Type:
Ceramic Disc

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
Rated 4 out of 5 by from Replacement Replaced same model that was 16 years old. Noticed some changes. Water comes out noisier. Replaced braided stainless steel hose with a rubber one. I hope it holds up as well as the previous one. The brushed nickel finish looks almost like stainless steel.
Date published: 2026-04-17
Rated 4 out of 5 by from Easy to use and high quality. Plumber installing had to go get an extra part ($). The only thing we don't love is that the extended nozzle needs a real push to get back in the faucet.
Date published: 2026-03-29
Rated 5 out of 5 by from Great features I love my new faucet. Hands down, it makes daily cooking easy and was easy to install. I really appreciate the customer service I received with this product. Thank you
Date published: 2026-02-21
Rated 3 out of 5 by from Not Satisfied and it's a Waste of Money. The faucet had a modern design. Unfortunately, when I installed the faucet I was surprised the way the Standard Flow of water was very "LOW". I do not know what's wrong with my new faucet.
Date published: 2026-01-25
Rated 2 out of 5 by from Ok for a while, but doesn't last Started out ok, but over time it didn't age well. The cartridge needs replaced repeatedly and only lasts maybe a year before it starts leaking again. The finish (as you can see in the photos) didn't last at all on the venetian bronze finish. The connection to the pull down sprayer is rusting.
Date published: 2026-01-08
Rated 1 out of 5 by from Doesn’t last long Needed a new cartridge after a year. Delta said they would only supply 1 for the life of the faucet. A year later the new one is failing and the screw to remove the handle to replace the $50 cartridge has seized so the faucet need to be replaced. Garbage.
Date published: 2025-12-14
Rated 5 out of 5 by from Looks great Love it! Looks great and doesn't get water spots!
Date published: 2025-10-23
Rated 1 out of 5 by from This is trash This is absolute trash. I can't believe you sell this crap. It never shuts off and it drips. This should last us forever. We are the original owners of the house. Delta fix it!
Date published: 2025-10-05
  • y_2026, m_6, d_10, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.46
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_508
  • loc_en_US, sid_978-SSSD-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 6ms
  • reviews, product
Q&A

i bought the 978-rb-dst kitchen faucet that lists 2 hole 4". Does that mean the center of the holes should be 4" apart? Are both holes to be drilled at 1 3/8" size?

Asked by: Scottie
Thank you for your question, Scottie! The center of the holes on model 978-RB-DST, need to be no less than 4 inches apart. The hole sizes need to be between 1 5/16" - 1 1/2" inches. I have included a link to the Technical Specifications diagram for model 978-RB-DST, for you to refer to. https://media.deltafaucet.com/SpecSheet/dsp-k-978-dst_G.pdf Best Regards, Benjamin
Answered by: Delta Faucet
Date published: 2024-03-28

can I buy just the spray head for the Leland bronze faucet? Model 978-RB-DST

Asked by: Lenny
Hi, Lenny! Thank you for your question. The Delta 978-RB-DST faucet sprayer assembly is available for separate purchase. The part number is RP51480RB. Here is a link to this part: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP51480RB Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

The handle has a set screw and no longer stays tight. Believe threads in handle are stripped. Can I purchase a new handle?

Asked by: Stuart
Hello Stuart, Thank you for your question. Yes, the handle assembly of the Delta Leland Pull-Down Kitchen 9978-RB-DST faucet can be purchased as a separate part. The part number for the metal lever handle assembly is RP46748RB. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP46748RB Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

Does this faucet come with the matching base plate? If not, can one be ordered separately?

Asked by: Cindy
Hi Cindy, Thank you for your question! This faucet does not include a base plate. We also do not have a plate available for this faucet. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

The specs say that this needs two four inch center holes. Can it be 5 inch centers?

When my granite was installed, the installers put my sprayer and the faucet at 5 inch centers. I really like this Leland faucet for my new faucet.
Asked by: CeeCee
Hi CeeCee, Thank you for your question. The 978-RB-DST can be installed on 5" centers. The spray hose will just not be able to extend as far as when installed a 4". Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

I don't see any markings to tell which supply line is hot and which is cold. I am installing a 9178-sp-dst. Is it just meant to install either way, or is there a right way and wrong way? Thanks

Asked by: Gary Leroy
Hi, Gary! Thank you for your question. There should be red and blue markings on the supply lines to show hot and cold connections on the Delta 9178-SP-DST Faucet. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Will this faucet fit into a sink with a 1 1/4 inch hole?

Asked by: phil52849
Hi, Phil52849! Thank you for your question. The Delta 9178-AR-DST Faucet does require a minimum hole size of 1 3/8" (35 mm). Here is a link to the technical specifications sheet for further measurements for the faucet: https://media.deltafaucet.com/SpecSheet/dsp-k-19978-sd-dst_D.pdf Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

I am concerned with flow rate on this faucet. I have found conflicting info on the flow rate. Some sites say 1.8 GPM while others say 2.2 GPM. I want

I want a faucet with at least 2.2GPM or higher.
Asked by: Carly
Hi Carly, Thank you for your question. The model 9178-RB-DST comes with an aerator with a flow rate of 1.8 gpm. You can order RP53998 which is a 2.2 gpm aerator to raise the flow rate for this particular model. None of our pull down faucets come with a flow rate of 2.2 gpm. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

Faucet head sold separately?

I own this model, and after years of use, the faucet head needs to be replaced. Can I purchase a faucet head separately?
Asked by: LMD1
Hi, Lisa! Thank you for your question. The sprayer assembly is available separately. The sprayer assembly is RP51480AR. here is a link to the sprayer: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP51480AR Best Regards, Rosanna
Answered by: Rosanna
Date published: 2024-03-28

How do you work the rubber touch clean

Water is flowing slower. Faucet installed by builder
Asked by: Mike
Hi, Mike! Thank you for your question. The rubber nubs can be cleaned by running your finger over the face of the sprayer. If you need to clean the sprayer because of low flow, you can take a solution of 50% white vinegar and 50% water solution and soak the whole sprayer in the solution for an hour or even overnight to clean. Best Regards, Rosanna
Answered by: Rosanna
Date published: 2021-01-24

I installed this unit in our kitchen about three months ago and it now has no flow of water through it - any suggestions to resolve the problem?

Asked by: Jim McLean
Thank you for your question, Jim! I'm sorry to hear you are experiencing a decreased flow and we are happy to help. We would recommend removing the wand to check for debris as well as performing a flush of the faucet. I have emailed you directly about flushing your model. Please refer to that email for further assistance if checking the wand does not help with the flow. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Can I turn the faucet off from the hot or cold position, or does it only turn off in the center position?

Asked by: GPH713
Hi, GPH713! Thank you for your question. The handle assembly on the Delta 9178-DST Faucet does need to be centered in order for the faucet to shut off properly. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Will the Delta soap dispenser RP44651SP in Spotshield Stainless match exactly in color the Leland kitchen faucets in Spotshield Stainless?

Asked by: Patty
Thank you for your question, Patty! The PVD process we use in the manufacturing of many of our finished products adds the color to our faucets while also providing superior abrasion resistance. We attempt to minimize variations in color by utilizing certain control methods; however, differences in sizes, shapes and materials of individual faucet parts can occasionally produce slight variations in color that are rarely noticeable to the human eye in certain lighting, despite the controls we have in place. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Is this faucet constructed with solid or hollow metal?

I recently purchased and returned a similar faucet from another company because it was constructed of a hollow flimsy metal. I would like to know the weight of this model along with how it is constructed. Thanks.
Asked by: Liz
Hi Liz, Thank you for your question. This faucet weights 6.2 pounds. This product has metal and non-metallic parts. The spout body is solid brass. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-07-07

can you shut off with handle in any position with leland 9178-SP-DST?

Asked by: Janice
Thank you for your inquiry, Janice! Thank you for your question. We recommend installing the Delta Leland Pull-Down Kitchen 9178-SP-DST faucet with the handle on the right. You may install it with the handle on the front or left side, but the temperature adjustment will be opposite of the standard operation for single handle faucets. You can compensate for this by swapping the hot and cold supply lines under the sink. However, the red/blue button will no longer indicate the correct temperature. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

reverse osmosis faucet

I have the leland faucet and want to install a reverse osmosis water filter. what product do you have that would match? i have it in the bronze. thanks!
Asked by: Lindsey
Hi Lindsey, Thank you for your question! The model 1977-RB-DST beverage faucet would be a close match to the Leland kitchen faucet in Venetian Bronze. Please click the link below to view our selection of beverage faucets: http://www.deltafaucet.com/kitchen/faucets/filter-results.html?finish=rb&sort=pricehighlow&type=type-kit-beverage&function=kitchen-faucets Thanks, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

Looking at the Leland 978-DST When the spray is turned on, and the tap is turned off, will the spray be on when the tap is turned on again? In other words, is water pressure required to keep the spray on?

Asked by: Reid
Hi, Reid! Thank you for your question. The mode selection on the sprayer assembly for the Delta 978-WE-DST faucet will stay at the mode selected before the water is turned off. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Origin is where?

Asked by: SCAR
Hi SCAR, Thank you for your question! Most of our faucets are manufactured in America and this model is compliant with the Buy American Act. For more information, please click the link below. http://www.deltafaucet.com/shopping-tools/research/buying-guides/buy-american/index.html Thanks, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

Where is the faucet made?

Asked by: New owner
Thank you for your question, Ma'am or Sir! The faucet 9178-AR-DST is made in the USA. Best Regards Themar
Answered by: DeltaFaucet7
Date published: 2024-03-28

Can this faucet (Delta 9178) be mounted to a countertop with an undermount sink?

Asked by: KP1217
Thank you for your question, KP1217! This faucet can be mounted on an under-mount installation. Please refer to the Technical Specifications to find the measurements such as hole size and maximum deck thickness to ensure that it will work with your sink. https://media.deltafaucet.com/SpecSheet/DSP-K-19978-SD-DST%20Rev%20D.pdf Best regards, Jon
Answered by: Delta Faucet
Date published: 2024-03-28

Possible to "convert" this to regular 1.8gpf faucet?

Is it possible to make this faucet operate at 1.8 gpf by simply omitting the RP61607 adapter, or does the aerator itself also need to be changed to 1.8 gpf version? thanks!
Asked by: KittPlumbing
Hi KPH, Thank you for your question. The RP60734 wand assembly (1.5 gpm) would need to be replaced with the RP51480. http://www.deltafaucet.com/repairparts/details/rp51480.html Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

people are saying water connection hoses are plastic instead of braided stainless. True?

Delta Faucet 9178-AR-DST Leland Single Handle Pull-Down Kitchen Faucet with Magnetic Docking,
Asked by: Bill
Hi Bill, Thank you for your question. Our Diamond Seal Technology (DST) faucets have PEX supply lines. These eliminate the need for additional riser hoses and provide for easier installation and fewer leak points. For more information about our DST models, please click the link below: http://www.deltafaucet.com/smart-solutions/diamond-seal-technology.html?filter=all Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

What is the difference in the 9178-RB-DST and the 19978Z-RB-DST? Is one just branded for the big box stores and if so, are they exactly the same quality and warranty?

Asked by: Jethro
Hi, Jethro! Thank you for your question. The Delta 9178-RB-DST Faucet can be purchased anywhere while the Delta 19978Z-RB-DST is exclusive to Home Depot. However, both are the exact same. All Delta faucets feature the same quality parts, materials, and workmanship, no matter what kind of dealer sells them. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

cleaning sprayer assembly

Mineral build up causing low water pressure. How do I take apart and clean?
Asked by: Penny
Dear Penny, Thank you for your question. We do not recommend disassembling the sprayer assembly. To dissolve any sediment that may collect in the aerator or spray face, just soak the face of the spray assembly in a 50/50 or stronger mixture of white vinegar and tap water for 10 to 15 minutes. The large particles of debris are caught in the bottom end of the spray assembly, where it connects to the hose. Just unscrew the spray assembly from the hose assembly and flush the debris out with water from the hose. Best regards, Tanya
Answered by: Tanya
Date published: 2016-09-17

Hi! If mounting directly to the countertop, does the handle need to be mounted to the right as shown in all the photos?

Asked by: Jerry
Hi, Jerry! Thank you for your question. We recommend installing this faucet with the handle on the right. You may install it with the handle on the front or left side, but the temperature adjustment will be opposite of the standard operation for single handle faucets. You could compensate for this by swapping the hot and cold supply lines under the sink. However, the red/blue button on the handle will no longer indicate the correct temperature. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Hello!  Is there a cartridge that needs to be changed periodically with this kitchen faucet?

Asked by: Pong
Thank you for your question, Pong! A Delta cartridge may at some point need replaced if debris accumulates inside. This part would be covered under the Lifetime Limited Warranty to the original consumer purchaser however. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-04-26

Can you move the handle to the lest side of faucet?

Asked by: Jessica
Hi, Jessica! Thank you for your question. The Delta 978-DST Faucet can be installed with the handle on the left side of the faucet body. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Do you sell the spray head separately?

Asked by: Robert
Thank you for your question, Robert! Yes, a spray head on model 9178-SP-DST can be purchased separately. This model can use 1 of 2 wand assemblies, 1 of which is a ShieldSpray wand. The part number of the ShieldSpray wand is RP90841SP, and the part number for the non-ShieldSpray wand is RP51480SP. I have included a link to the Parts Diagram, for you to refer to. https://media.deltafaucet.com/PartsDiagram/DPD-K-9178-DST.pdf Best Regards, Benjamin
Answered by: Delta Faucet
Date published: 2024-03-28

Is this significantly smaller than model 9178-AR-DST?

I need a regular kitchen sink faucet as well as a smaller bar sink faucet. It has been difficult to find both in the same collection. I like the 9178 for the regular sink. How much smaller is the 9978 than the 9178? Will it truly work for a bar sink, which is quite a bit smaller than a regular kitchen sink?
Asked by: Anne
Thank you for your question. Delta Faucet model # 9178-DST is 9 13/64" long and 14 7/8" high. Delta Faucet model # 9978-DST is 6 11/16" long and 14" high.
Answered by: Delta1
Date published: 2024-03-28

Can I change the faucet handle from the right side to the left side myself? How do I do it?

Asked by: Ken
Thank you for your question, Ken! We recommend installing this faucet with the handle on the right. You may install it with the handle on the front or left side, but the temperature adjustment will be opposite of the standard operation for single handle faucets. You can compensate for this by swapping the hot and cold supply lines under the sink. However, the red/blue button will no longer indicate the correct temperature. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-07-14
  • y_2026, m_6, d_10, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.46
  • cp_7, bvpage2n
  • co_hasquestionsanswers, tq_614
  • loc_en_US, sid_978-SSSD-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 79ms
  • questions, product
PART LIST

PART LIST

1 2 >
Image-Master-RP44651

Delta®

Delta® Soap / Lotion Dispenser

List Price: $80.05 - $113.30

RP44651

Image-RP40650

Michael Graves™

Michael Graves™ Set Screw

List Price: $7.15
Online Price: $5.72
Free Ground Shipping All Orders $49+

RP40650

5.00 3
Image-RP37490

Delta®

Delta® Stabilization Plate

List Price: $29.40
Online Price: $23.52
Free Ground Shipping All Orders $49+

RP37490

3.20 5
Image-Master-RP50813

Delta®

Delta® Soap / Lotion Dispenser

List Price: $62.85 - $97.00
Free Ground Shipping All Orders $49+

RP50813

Image-RP63265

Delta®

Delta® Adapter - Slip Joint

List Price: $58.55
Online Price: $46.84
Free Ground Shipping All Orders $49+

RP63265

Image-Master-RP54537

Leland®

Leland® Spout Assembly

List Price: $123.80 - $247.15
Free Ground Shipping All Orders $49+

RP54537

Image-RP63264

Delta®

Delta® Adapter Kit - PEX Compression (10)

List Price: $92.90
Online Price: $74.32
Free Ground Shipping All Orders $49+

RP63264

Image-RP21945

Delta®

Delta® Soap / Lotion Dispenser - Nut

List Price: $8.30
Online Price: $6.64
Free Ground Shipping All Orders $49+

RP21945

4.00 2
Image-RP63263

Delta®

Delta® Adapter Kit - PEX Compression (4)

List Price: $45.35
Online Price: $36.28
Free Ground Shipping All Orders $49+

RP63263

3.67 3
Image-RP50815

Victorian®

Victorian® Aerator & Wrench - Pull-Out or Pull-Down

List Price: $31.10
Online Price: $24.88
Free Ground Shipping All Orders $49+

RP50815

4.56 27
Image-Master-RP46748CZ

Leland®

Leland® Handle and Button

List Price: $59.95 - $110.90
Free Ground Shipping All Orders $49+

RP46748CZ

Image-RP47029

Leland®

Leland® Mounting Bracket - 1H Bathroom

List Price: $18.05
Online Price: $14.44
Free Ground Shipping All Orders $49+

RP47029

5.00 2
Image-RP60923

Delta®

Delta® Friction Spacers & Clip - Kitchen

List Price: $24.35
Online Price: $19.48
Free Ground Shipping All Orders $49+

RP60923

5.00 2
Image-Master-RP51480

Leland®

Leland® Spray Assembly - Pull-Down Kitchen

List Price: $123.10 - $296.00
Free Ground Shipping All Orders $49+

RP51480

Image-RP13938

Delta®

Delta® O-Ring

List Price: $8.25
Online Price: $6.60
Free Ground Shipping All Orders $49+

RP13938

4.50 2
Image-RP47030

Leland®

Leland® Bathroom Wrench

List Price: $10.00
Online Price: $8.00
Free Ground Shipping All Orders $49+

RP47030

1.00 2
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.